[Thu Jun 13 12:46:27 2013] Detection parameters:
  Position = (311.4, 314.9) = 17 45 40.03 -29 0 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 449.8 +/- 26.6
  Background counts = 16.2
  Rate = 0.1 +/- 0.006

[Thu Jun 13 12:46:28 2013] Off-axis axis estimate = 1.52'
[Thu Jun 13 14:05:33 2013] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 14:05:33 2013] Initial guess for spatial extent in simple fitting = 7.19"
[Thu Jun 13 14:05:33 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.079
[Thu Jun 13 14:05:33 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.19"
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src1.csv
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src1.csv
[Thu Jun 13 14:28:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 13 14:28:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:28:38 2013] Warning, spatial fit 1 centroid is now closest to src. 8
[Thu Jun 13 14:28:38 2013] Spatial fit model total counts = 1021.490000, observed total counts = 1019.000000
[Thu Jun 13 14:28:38 2013] Offset between fit and detection position for source 1 = 2.812646 pixels
[Thu Jun 13 14:28:38 2013] Warning, changing simple spatial fit ID from 1 to 2
[Thu Jun 13 14:28:38 2013] 984.436000 total counts/ 640.412000 bgd. counts: snr = 13.594368
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.812646 pixels
  Position = (308.5, 314.8) = 17 45 40.97 -29 0 25.3
  Extent = 14.3 (14.3-28.6)", rotation angle = 0
  Source counts = 344.0 +/- 31.4
  Background counts = 640.4
  Rate = 0.08 +/- 0.007
[Thu Jun 13 14:28:38 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 14:28:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 14:28:38 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 14:28:38 2013] Source does appear to be extended
[Thu Jun 13 14:28:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 14:28:38 2013] Source is confused with source 2
[Thu Jun 13 15:37:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 15:37:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 15:37:59 2013] Initial guess for spatial extent in simple fitting = 14.31"
[Thu Jun 13 15:37:59 2013] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.975
[Thu Jun 13 15:37:59 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 14.31"
[Thu Jun 13 16:06:47 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 13 16:06:47 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 13 16:06:47 2013] Fit fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jun 13 16:06:48 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 13 16:06:48 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 13 16:06:48 2013] Fit fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 13 16:06:56 2013] Spatial fit model total counts = 2107.910000, observed total counts = 1966.000000
[Thu Jun 13 16:06:56 2013] Offset between fit and detection position for source 1 = 0.846337 pixels
[Thu Jun 13 16:06:56 2013] 2082.178000 total counts/ 1234.270000 bgd. counts: snr = 24.134797
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.846337 pixels
  Position = (309.4, 314.6) = 17 45 40.69 -29 0 26.0
  Extent = 28.6 (27.0-57.2)" x 13.6 (11.6-15.5)", rotation angle = 24 (17-30) degrees
  Source counts = 847.9 +/- 45.6
  Background counts = 1234.3
  Rate = 0.2 +/- 0.01
[Thu Jun 13 16:06:56 2013] Spatial fit model total counts = 1023.290000, observed total counts = 1019.000000
[Thu Jun 13 16:06:56 2013] Offset between fit and detection position for source 1 = 0.843290 pixels
[Thu Jun 13 16:06:56 2013] Warning, changing simple spatial fit ID from 1 to 2
[Thu Jun 13 16:06:56 2013] 977.361000 total counts/ 618.901000 bgd. counts: snr = 14.408876
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.843290 pixels
  Position = (308.5, 314.8) = 17 45 40.97 -29 0 25.3
  Extent = 14.3 (14.3-28.6)", rotation angle = 0
  Source counts = 358.5 +/- 31.3
  Background counts = 618.9
  Rate = 0.08 +/- 0.007
[Thu Jun 13 16:06:56 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:06:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:06:56 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 16:06:56 2013] Source does appear to be extended
[Thu Jun 13 16:06:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:53:07 2013] XMMSAS src. selection expression = ellipse(26794.934000, 27338.532000, 858.738025, 858.738025, 0.000000, X, Y)
[Thu Jun 13 16:53:07 2013] Writing source region out to fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 13 16:53:07 2013] Extracting stamp from image fullrun_mos2_xmm0511000401_pi300-10000_cl_sm2.00.img.gz, (259, 265) - (358, 364)
[Thu Jun 13 16:53:07 2013] XMMSAS bgd. selection expression = annulus(26794.934000, 27338.532000, 1431.230041, 2862.460082, X, Y) && !ellipse(26335.959839, 27610.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.398800, 27909.194800, 1152.896033, 1152.896033, 0.000000, X, Y) && !ellipse(27939.326721, 27345.210815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28218.041077, 26145.530518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.970000, 26402.252000, 1081.312031, 1081.312031, 0.000000, X, Y) && !ellipse(28177.703217, 28236.974091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27953.002777, 25657.833496, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 16:53:07 2013] Writing fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src1.gif
[Thu Jun 13 16:53:08 2013] Mean detx,y = (274.23, -207.73) 
[Thu Jun 13 16:53:09 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:53:15 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:53:15 2013] Setting source spectrum file to fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 13 16:53:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 13 17:08:26 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:08:26 2013] Total counts from fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1252.00
[Thu Jun 13 17:08:26 2013] Total counts from fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1104.00
[Thu Jun 13 17:08:26 2013] Got source and background scale factors 2270632.000000, 9903940.000000
[Thu Jun 13 17:08:26 2013] User source parameters:
  Position = (308.5, 314.8) = 17 45 40.97 -29 0 25.3
  Extent = 14.3 (14.3-28.6)", rotation angle = 0
  Source aperture counts = 998.9 +/- 36.4
  Background aperture counts = 253.1
  Rate = 0.2 +/- 0.008

[Thu Jun 13 17:08:27 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:08:27 2013] Using photon index=1.80, rate=0.0826, arf fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src1.arf
[Thu Jun 13 17:08:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:08:27 2013] Updating source flux to 1.5e-12
[Thu Jun 13 17:08:30 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Jun 13 17:08:33 2013] xmm0511000401/analysis//spectral/fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete