[Mon May 28 05:03:33 2012] Detection parameters:
  Position = (373.7, 252.1) = 17 46 18.64 -28 43 38.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.6 +/- 26.7
  Background counts = 28.9
  Rate = 0.06 +/- 0.009

[Mon May 28 05:03:33 2012] Off-axis axis estimate = 6.41'
[Mon May 28 05:04:29 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Mon May 28 05:04:29 2012] Initial guess for spatial extent in simple fitting = 9.63"
[Mon May 28 05:04:29 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.814
[Mon May 28 05:04:29 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.63"
[Mon May 28 05:54:11 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 28 05:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src3.csv
[Mon May 28 05:54:11 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 28 05:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src3.csv
[Mon May 28 05:54:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 05:54:12 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 28 05:54:12 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 28 05:54:12 2012] Fit fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 28 06:12:06 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Mon May 28 06:12:06 2012] Source 3 is offset by 7.484760 and 1.541525 pixels which is larger than
2 X fitted extent = 2.642709 x 1.924253, not incorporating fit results
[Mon May 28 06:12:06 2012] Vigneting correction estimate = 1.000000
[Mon May 28 06:12:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 06:12:06 2012] Assessing source extent using major
[Mon May 28 06:12:06 2012] Source does appear to be extended
[Mon May 28 06:12:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 06:12:11 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Mon May 28 06:12:11 2012] Initial guess for spatial extent in simple fitting = 9.63"
[Mon May 28 06:12:11 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.814
[Mon May 28 06:12:11 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.63"
[Mon May 28 07:04:07 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 28 07:04:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_src3.csv
[Mon May 28 07:04:07 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 28 07:04:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_src3.csv
[Mon May 28 07:04:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 07:04:07 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 28 07:04:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May 28 07:04:07 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 28 07:04:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May 28 07:04:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 07:25:45 2012] Source 3 is offset by 7.250399 and 1.084866 pixels which is larger than
2 X fitted extent = 2.963476 x 2.963476, not incorporating fit results
[Mon May 28 07:25:45 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.534873 pixels away
[Mon May 28 07:25:45 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.683291 pixels away
[Mon May 28 07:25:45 2012] Vigneting correction estimate = 1.000000
[Mon May 28 07:25:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 07:25:45 2012] Assessing source extent using major
[Mon May 28 07:25:45 2012] Source does appear to be extended
[Mon May 28 07:25:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 07:25:50 2012] XMMSAS src. selection expression = ellipse(32461.192078, 21882.053940, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 07:25:50 2012] Writing source region out to fullrun_pn_xmm0511000201_pi300-10000_pass1_cl_src3_src.reg
[Mon May 28 07:25:50 2012] Extracting stamp from image fullrun_pn_xmm0511000201_pi300-10000_cl_sm2.00.img.gz, (336, 215) - (411, 290)
[Mon May 28 07:25:50 2012] XMMSAS bgd. selection expression = annulus(32461.192078, 21882.053940, 1087.500000, 2175.000000, X, Y) && !ellipse(31795.266000, 21793.466800, 373.268811, 373.268811, 0.000000, X, Y) && !ellipse(31621.663849, 24816.579498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32342.060913, 21012.145538, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 07:25:50 2012] Writing fullrun_pn_xmm0511000201_pi300-10000_pass1_cl_src3.gif
[Mon May 28 07:26:52 2012] Mean detx,y = (4874.53, 5752.27) 
[Mon May 28 07:26:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 07:27:06 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 07:27:06 2012] Setting source spectrum file to fullrun_pn_xmm0511000201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 07:27:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511000201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 28 07:30:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 07:30:59 2012] rmf not generated due to insufficient counts
[Mon May 28 07:44:12 2012] Updating aperture counts using extracted products
[Mon May 28 07:44:12 2012] Error reading totcts from fullrun_pn_xmm0511000201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 07:44:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 07:44:12 2012] Using photon index=1.80, rate=0.0579, arf fullrun_pn_xmm0511000201_pi300-10000_pass1_cl_src3.arf
[Mon May 28 07:44:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 07:44:12 2012] Updating source flux to 2e-13
[Mon May 28 07:45:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting