[Mon May 28 05:03:33 2012] Detection parameters:
  Position = (369.1, 183.9) = 17 46 20.15 -28 48 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.7 +/- 9.0
  Background counts = 20.5
  Rate = 0.006 +/- 0.002

[Mon May 28 05:03:33 2012] Off-axis axis estimate = 9.75'
[Mon May 28 05:04:29 2012] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Mon May 28 05:04:29 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Mon May 28 05:04:29 2012] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.781
[Mon May 28 05:04:29 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.31"
[Mon May 28 05:54:11 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src23.ximg exists
[Mon May 28 05:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src23.csv
[Mon May 28 05:54:11 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon May 28 05:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src23.csv
[Mon May 28 05:54:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 05:54:12 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon May 28 05:54:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Mon May 28 05:54:12 2012] fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon May 28 05:54:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Mon May 28 05:54:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000201_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 06:12:06 2012] Spatial fit model total counts = 340.889000, observed total counts = 330.000000
[Mon May 28 06:12:06 2012] Offset between fit and detection position for source 23 = 9.809075 pixels
[Mon May 28 06:12:06 2012] Warning, changing simple spatial fit ID from 23 to 4
[Mon May 28 06:12:06 2012] 0.000017 total counts/ 0.000000 bgd. counts: snr = 3888.535020
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 9.809075 pixels
  Position = (359.3, 183.7) = 17 46 23.39 -28 48 36.7
  Extent = 23.4" x 23.4", rotation angle = 0
  Source counts = 0.0 +/- 0.0
  Background counts = 0.0
  Rate = 3e-09 +/- 8e-07
[Mon May 28 06:12:06 2012] Vigneting correction estimate = 1.000000
[Mon May 28 06:12:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 06:12:06 2012] Assessing source extent using major
[Mon May 28 06:12:06 2012] Source does appear to be extended
[Mon May 28 06:12:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 06:12:06 2012] Deleting source due to low Poisson probability 0.5