[Wed May 8 00:40:49 2013] Detection parameters: Position = (356.6, 221.0) = 17 46 15.92 -28 43 0.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 64.5 +/- 12.3 Background counts = 28.0 Rate = 0.008 +/- 0.001 [Wed May 8 00:40:49 2013] Off-axis axis estimate = 7.02' [Wed May 8 00:41:03 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting [Wed May 8 00:41:03 2013] Initial guess for spatial extent in simple fitting = 9.94" [Wed May 8 00:41:03 2013] source mask rpix=2.3, npix_max = 31, mask sum = 17, frac = 0.548 [Wed May 8 00:41:03 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.94" [Wed May 8 00:41:04 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src5.ximg exists [Wed May 8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src5.csv [Wed May 8 00:41:04 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src5_1.ximg exists [Wed May 8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src5.csv [Wed May 8 00:41:04 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 00:41:04 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Wed May 8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src5.csv [Wed May 8 00:41:04 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Wed May 8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src5.csv [Wed May 8 00:41:04 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 00:41:08 2013] Spatial fit model total counts = 522.573000, observed total counts = 471.000000 [Wed May 8 00:41:08 2013] Poor agreement between spatial fit and data for source 5 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 8 00:41:08 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.076584 pixels away [Wed May 8 00:41:08 2013] Vigneting correction estimate = 1.000000 [Wed May 8 00:41:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 00:41:08 2013] Assessing source extent using major [Wed May 8 00:41:08 2013] Source does appear to be extended [Wed May 8 00:41:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 00:41:08 2013] Deleting source due to low Poisson probability 0.9