[Wed May  8 00:40:49 2013] Detection parameters:
  Position = (327.7, 201.3) = 17 46 25.49 -28 44 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.6 +/- 13.9
  Background counts = 37.1
  Rate = 0.02 +/- 0.003

[Wed May  8 00:40:49 2013] Off-axis axis estimate = 7.35'
[Wed May  8 00:41:03 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed May  8 00:41:03 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Wed May  8 00:41:03 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Wed May  8 00:41:03 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.11"
[Wed May  8 00:41:04 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src3.ximg exists
[Wed May  8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src3.csv
[Wed May  8 00:41:04 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May  8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src3.csv
[Wed May  8 00:41:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 00:41:04 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May  8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May  8 00:41:04 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May  8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May  8 00:41:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 00:41:08 2013] Source 2 is offset by -1.915333 and 8.718914 pixels which is larger than
2 X fitted extent = 1.178864 x 1.178864, not incorporating fit results
[Wed May  8 00:41:08 2013] Spatial fit model total counts = 488.169000, observed total counts = 387.000000
[Wed May  8 00:41:08 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 00:41:08 2013] Vigneting correction estimate = 1.000000
[Wed May  8 00:41:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 00:41:08 2013] Assessing source extent using major
[Wed May  8 00:41:08 2013] Source does appear to be extended
[Wed May  8 00:41:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 00:41:08 2013] Deleting source due to low Poisson probability 0.9