[Wed May  8 00:40:49 2013] Detection parameters:
  Position = (339.7, 201.2) = 17 46 21.51 -28 44 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.4 +/- 15.0
  Background counts = 36.4
  Rate = 0.02 +/- 0.003

[Wed May  8 00:40:49 2013] Off-axis axis estimate = 7.66'
[Wed May  8 00:41:03 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Wed May  8 00:41:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 00:41:03 2013] Initial guess for spatial extent in simple fitting = 10.26"
[Wed May  8 00:41:03 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.102
[Wed May  8 00:41:03 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.26"
[Wed May  8 00:41:03 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src2.ximg exists
[Wed May  8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src2.csv
[Wed May  8 00:41:04 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May  8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src2.csv
[Wed May  8 00:41:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 00:41:04 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May  8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May  8 00:41:04 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May  8 00:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May  8 00:41:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 00:41:08 2013] Warning, spatial fit 2 centroid is now closest to src. 2
[Wed May  8 00:41:08 2013] Vigneting correction estimate = 1.000000
[Wed May  8 00:41:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 00:41:08 2013] Assessing source extent using major
[Wed May  8 00:41:08 2013] Source does appear to be extended
[Wed May  8 00:41:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 00:41:14 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Wed May  8 00:41:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 00:41:14 2013] Initial guess for spatial extent in simple fitting = 10.26"
[Wed May  8 00:41:14 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.102
[Wed May  8 00:41:14 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.26"
[Wed May  8 00:41:14 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_src2.ximg exists
[Wed May  8 00:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_src2.csv
[Wed May  8 00:41:14 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May  8 00:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_src2.csv
[Wed May  8 00:41:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 00:41:14 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May  8 00:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May  8 00:41:14 2013] fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May  8 00:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May  8 00:41:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 00:41:18 2013] Spatial fit model total counts = 267.104000, observed total counts = 1244.000000
[Wed May  8 00:41:18 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 00:41:18 2013] Vigneting correction estimate = 1.000000
[Wed May  8 00:41:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 00:41:18 2013] Assessing source extent using major
[Wed May  8 00:41:18 2013] Source does appear to be extended
[Wed May  8 00:41:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 00:50:12 2013] XMMSAS src. selection expression = ellipse(29501.968109, 17458.424667, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  8 00:50:12 2013] Not overwriting source region fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_src.reg
[Wed May  8 00:50:12 2013] Extracting stamp from image fullrun_mos2_xmm0511000101_pi300-10000_cl_sm2.00.img.gz, (302, 164) - (377, 239)
[Wed May  8 00:50:12 2013] XMMSAS bgd. selection expression = annulus(29501.968109, 17458.424667, 1087.500000, 2175.000000, X, Y) && !ellipse(29640.166800, 18343.278800, 569.578416, 408.635212, 331.030600, X, Y)
[Wed May  8 00:50:12 2013] Writing fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1.gif
[Wed May  8 00:50:12 2013] ../../xmm0511000101/products/events/fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0511000101/products/events/fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed May  8 00:50:12 2013] Mean detx,y = (4780.22, 6559.91) 
[Wed May  8 00:50:12 2013] ../../xmm0511000101/products/images/fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0511000101/products/images/fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed May  8 00:50:12 2013] ../../xmm0511000101/products/spectra/fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0511000101/products/spectra/fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed May  8 00:50:12 2013] Setting source spectrum file to fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  8 00:50:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May  8 00:50:12 2013] ../../xmm0511000101/products/lightcurves/fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0511000101/products/lightcurves/fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed May  8 00:50:13 2013] Not generating rmf since there are only 86 counts
[Wed May  8 00:50:13 2013] rmf not generated due to insufficient counts
[Wed May  8 00:50:13 2013] fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Wed May  8 00:50:41 2013] Updating aperture counts using extracted products
[Wed May  8 00:50:41 2013] Total counts from fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 619.00
[Wed May  8 00:50:41 2013] Total counts from fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 2347.00
[Wed May  8 00:50:41 2013] Got source and background scale factors 1100972.000000, 10010187.000000
[Wed May  8 00:50:41 2013] User source parameters:
  Position = (339.7, 201.2) = 17 46 21.51 -28 44 23.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 360.9 +/- 25.9
  Background aperture counts = 258.1
  Rate = 0.06 +/- 0.004

[Wed May  8 00:50:41 2013] Updating counts from extracted products
[Wed May  8 00:50:41 2013] Set source signif. to 360.86/16.07 = 22.46
[Wed May  8 00:50:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 00:50:41 2013] Using photon index=1.80, rate=0.0565, arf fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1.arf
[Wed May  8 00:50:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 00:50:41 2013] Updating source flux to 1.9e-12
[Wed May  8 00:50:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 00:50:51 2013] xmm0511000101/analysis//spectral/fullrun_mos2_xmm0511000101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete