[Wed May 8 00:40:48 2013] Detection parameters: Position = (336.1, 202.2) = 17 46 22.71 -28 44 15.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 153.3 +/- 19.9 Background counts = 39.4 Rate = 0.03 +/- 0.004 [Wed May 8 00:40:49 2013] Off-axis axis estimate = 7.49' [Wed May 8 00:41:02 2013] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting [Wed May 8 00:41:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 8 00:41:02 2013] Initial guess for spatial extent in simple fitting = 10.17" [Wed May 8 00:41:02 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.117 [Wed May 8 00:41:02 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.17" [Wed May 8 00:41:03 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_src2.ximg exists [Wed May 8 00:41:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_src2.csv [Wed May 8 00:41:03 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_src2_1.ximg exists [Wed May 8 00:41:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_src2.csv [Wed May 8 00:41:03 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 00:41:03 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Wed May 8 00:41:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2.csv [Wed May 8 00:41:03 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Wed May 8 00:41:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2.csv [Wed May 8 00:41:03 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 00:41:07 2013] Warning, spatial fit 2 centroid is now closest to src. 4 [Wed May 8 00:41:07 2013] Vigneting correction estimate = 1.000000 [Wed May 8 00:41:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 00:41:07 2013] Assessing source extent using major [Wed May 8 00:41:07 2013] Source does appear to be extended [Wed May 8 00:41:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 00:41:07 2013] Source is confused with source 2 [Wed May 8 00:41:07 2013] Source is confused with source 7 [Wed May 8 00:41:13 2013] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting [Wed May 8 00:41:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 8 00:41:13 2013] Initial guess for spatial extent in simple fitting = 10.17" [Wed May 8 00:41:13 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.117 [Wed May 8 00:41:13 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.17" [Wed May 8 00:41:13 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src2.ximg exists [Wed May 8 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src2.csv [Wed May 8 00:41:13 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src2_1.ximg exists [Wed May 8 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src2.csv [Wed May 8 00:41:13 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 00:41:14 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Wed May 8 00:41:14 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Wed May 8 00:41:14 2013] Fit fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Wed May 8 00:41:17 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.388727 pixels away [Wed May 8 00:41:17 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.984676 pixels away [Wed May 8 00:41:17 2013] Source 3 is offset by -1.178242 and -7.566041 pixels which is larger than 2 X fitted extent = 2.633320 x 2.633320, not incorporating fit results [Wed May 8 00:41:17 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.363476 pixels away [Wed May 8 00:41:17 2013] Vigneting correction estimate = 1.000000 [Wed May 8 00:41:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 00:41:17 2013] Assessing source extent using major [Wed May 8 00:41:17 2013] Source does appear to be extended [Wed May 8 00:41:17 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 00:41:22 2013] XMMSAS src. selection expression = ellipse(29188.456940, 17545.326431, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 8 00:41:22 2013] Not overwriting source region fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_src.reg [Wed May 8 00:41:22 2013] Extracting stamp from image fullrun_mos1_xmm0511000101_pi300-10000_cl_sm2.00.img.gz, (299, 165) - (374, 240) [Wed May 8 00:41:22 2013] XMMSAS bgd. selection expression = annulus(29188.456940, 17545.326431, 1087.500000, 2175.000000, X, Y) && !ellipse(29620.396400, 18353.784000, 521.111215, 521.111215, 0.000000, X, Y) && !ellipse(30121.813904, 17555.114197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28704.638916, 17551.306885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30754.881744, 19099.202240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.581562, 16804.316000, 1616.368047, 1616.368047, 0.000000, X, Y) [Wed May 8 00:41:22 2013] Writing fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3.gif [Wed May 8 00:41:23 2013] ../../xmm0511000101/products/events/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0511000101/products/events/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create [Wed May 8 00:41:23 2013] Mean detx,y = (6770.05, -4690.46) [Wed May 8 00:41:23 2013] ../../xmm0511000101/products/images/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0511000101/products/images/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create [Wed May 8 00:41:23 2013] ../../xmm0511000101/products/spectra/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0511000101/products/spectra/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create [Wed May 8 00:41:23 2013] Setting source spectrum file to fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed May 8 00:41:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_bgd.pi.gz [Wed May 8 00:41:23 2013] ../../xmm0511000101/products/lightcurves/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0511000101/products/lightcurves/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create [Wed May 8 00:45:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 00:45:52 2013] rmf not generated due to insufficient counts [Wed May 8 00:50:40 2013] Updating aperture counts using extracted products [Wed May 8 00:50:40 2013] Total counts from fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 834.00 [Wed May 8 00:50:40 2013] Total counts from fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1097.00 [Wed May 8 00:50:40 2013] Got source and background scale factors 1222250.000000, 4533623.000000 [Wed May 8 00:50:40 2013] User source parameters: Position = (336.1, 202.2) = 17 46 22.71 -28 44 15.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 538.3 +/- 29.9 Background aperture counts = 295.7 Rate = 0.08 +/- 0.005 [Wed May 8 00:50:40 2013] Updating counts from extracted products [Wed May 8 00:50:40 2013] Set source signif. to 538.25/17.20 = 31.30 [Wed May 8 00:50:40 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 00:50:40 2013] Using photon index=1.80, rate=0.0834, arf fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3.arf [Wed May 8 00:50:40 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 00:50:40 2013] Updating source flux to 2.5e-12 [Wed May 8 00:50:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 00:50:49 2013] xmm0511000101/analysis//spectral/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete