[Wed May  8 00:40:48 2013] Detection parameters:
  Position = (330.5, 202.3) = 17 46 24.55 -28 44 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.4 +/- 14.4
  Background counts = 39.6
  Rate = 0.02 +/- 0.003

[Wed May  8 00:40:49 2013] Off-axis axis estimate = 7.35'
[Wed May  8 00:41:02 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Wed May  8 00:41:02 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Wed May  8 00:41:02 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.942
[Wed May  8 00:41:02 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.10"
[Wed May  8 00:41:03 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_src4.ximg exists
[Wed May  8 00:41:03 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May  8 00:41:03 2013] Fit fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_src4 appears to have run properly
[Wed May  8 00:41:03 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May  8 00:41:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May  8 00:41:03 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May  8 00:41:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May  8 00:41:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511000101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 00:41:07 2013] Warning, spatial fit 4 centroid is now closest to src. 7
[Wed May  8 00:41:07 2013] Spatial fit model total counts = 457.143000, observed total counts = 388.000000
[Wed May  8 00:41:07 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 00:41:07 2013] Vigneting correction estimate = 1.000000
[Wed May  8 00:41:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 00:41:07 2013] Assessing source extent using major
[Wed May  8 00:41:07 2013] Source does appear to be extended
[Wed May  8 00:41:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 00:41:07 2013] Source is confused with source 3
[Wed May  8 00:41:13 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Wed May  8 00:41:13 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Wed May  8 00:41:13 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.942
[Wed May  8 00:41:13 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.10"
[Wed May  8 00:41:13 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src4.ximg exists
[Wed May  8 00:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src4.csv
[Wed May  8 00:41:14 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May  8 00:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src4.csv
[Wed May  8 00:41:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 00:41:14 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May  8 00:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May  8 00:41:14 2013] fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May  8 00:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May  8 00:41:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511000101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 00:41:17 2013] Warning, spatial fit 4 centroid is now closest to src. 3
[Wed May  8 00:41:17 2013] Vigneting correction estimate = 1.000000
[Wed May  8 00:41:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 00:41:17 2013] Assessing source extent using major
[Wed May  8 00:41:17 2013] Source does appear to be extended
[Wed May  8 00:41:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 00:41:22 2013] XMMSAS src. selection expression = ellipse(28704.638916, 17551.306885, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  8 00:41:22 2013] Not overwriting source region fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_src.reg
[Wed May  8 00:41:22 2013] Extracting stamp from image fullrun_mos1_xmm0511000101_pi300-10000_cl_sm2.00.img.gz, (293, 165) - (368, 240)
[Wed May  8 00:41:22 2013] XMMSAS bgd. selection expression = annulus(28704.638916, 17551.306885, 1087.500000, 2175.000000, X, Y) && !ellipse(29620.396400, 18353.784000, 521.111215, 521.111215, 0.000000, X, Y) && !ellipse(29188.456940, 17545.326431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30121.813904, 17555.114197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30754.881744, 19099.202240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.581562, 16804.316000, 1616.368047, 1616.368047, 0.000000, X, Y)
[Wed May  8 00:41:22 2013] Writing fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2.gif
[Wed May  8 00:41:23 2013] ../../xmm0511000101/products/events/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0511000101/products/events/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed May  8 00:41:23 2013] Mean detx,y = (6901.54, -4226.28) 
[Wed May  8 00:41:23 2013] ../../xmm0511000101/products/images/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0511000101/products/images/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed May  8 00:41:23 2013] ../../xmm0511000101/products/spectra/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0511000101/products/spectra/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed May  8 00:41:23 2013] Setting source spectrum file to fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May  8 00:41:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May  8 00:41:23 2013] ../../xmm0511000101/products/lightcurves/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0511000101/products/lightcurves/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed May  8 00:46:17 2013] Not generating rmf since there are only 73 counts
[Wed May  8 00:46:17 2013] rmf not generated due to insufficient counts
[Wed May  8 00:50:40 2013] Updating aperture counts using extracted products
[Wed May  8 00:50:40 2013] Total counts from fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 499.00
[Wed May  8 00:50:40 2013] Total counts from fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1207.00
[Wed May  8 00:50:40 2013] Got source and background scale factors 1216872.000000, 5482812.000000
[Wed May  8 00:50:40 2013] User source parameters:
  Position = (330.5, 202.3) = 17 46 24.55 -28 44 13.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 231.1 +/- 23.4
  Background aperture counts = 267.9
  Rate = 0.04 +/- 0.004

[Wed May  8 00:50:40 2013] Updating counts from extracted products
[Wed May  8 00:50:40 2013] Set source signif. to 231.11/16.37 = 14.12
[Wed May  8 00:50:40 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 00:50:40 2013] Using photon index=1.80, rate=0.0358, arf fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2.arf
[Wed May  8 00:50:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 00:50:40 2013] Updating source flux to 9.8e-13
[Wed May  8 00:50:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 00:50:49 2013] xmm0511000101/analysis//spectral/fullrun_mos1_xmm0511000101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete