[Fri Dec 30 06:39:10 2011] Detection parameters:
  Position = (288.7, 276.0) = 17 0 58.44 -46 11 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5625.1 +/- 90.5
  Background counts = 82.5
  Rate = 0.1 +/- 0.002

[Fri Dec 30 06:39:11 2011] Off-axis axis estimate = 1.78'
[Fri Dec 30 06:45:59 2011] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 06:45:59 2011] Initial guess for spatial extent in simple fitting = 7.32"
[Fri Dec 30 06:45:59 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.050
[Fri Dec 30 06:45:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Fri Dec 30 07:41:04 2011] fullrun_pn_xmm0510990101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 30 07:41:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510990101_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 07:41:04 2011] fullrun_pn_xmm0510990101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 30 07:41:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510990101_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 07:41:04 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510990101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510990101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:41:05 2011] fullrun_pn_xmm0510990101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 30 07:41:05 2011] fullrun_pn_xmm0510990101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 30 07:41:05 2011] Fit fullrun_pn_xmm0510990101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 30 08:22:24 2011] Spatial fit model total counts = 4757.780000, observed total counts = 4759.000000
[Fri Dec 30 08:22:24 2011] Offset between fit and detection position for source 1 = 0.045832 pixels
[Fri Dec 30 08:22:24 2011] 4768.610000 total counts/ 1251.060000 bgd. counts: snr = 99.449181
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.045832 pixels
  Position = (288.6, 276.0) = 17 0 58.46 -46 11 8.6
  Extent = 5.8 (5.6-5.9)", rotation angle = 0
  Source counts = 3517.6 +/- 69.1
  Background counts = 1251.1
  Rate = 0.1 +/- 0.002
[Fri Dec 30 08:22:24 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:22:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:22:24 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 08:22:24 2011] Source does appear to be extended
[Fri Dec 30 08:22:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:22:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 08:22:41 2011] Initial guess for spatial extent in simple fitting = 5.77"
[Fri Dec 30 08:22:41 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.900
[Fri Dec 30 08:22:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.77"
[Fri Dec 30 09:06:14 2011] fullrun_pn_xmm0510990101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 30 09:06:14 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0510990101_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 09:06:14 2011] fullrun_pn_xmm0510990101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 30 09:06:14 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0510990101_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 09:06:14 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510990101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510990101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:06:14 2011] fullrun_pn_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 30 09:06:14 2011] fullrun_pn_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 30 09:06:14 2011] Fit fullrun_pn_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 30 09:46:33 2011] Spatial fit model total counts = 4758.460000, observed total counts = 4759.000000
[Fri Dec 30 09:46:33 2011] Offset between fit and detection position for source 1 = 0.000098 pixels
[Fri Dec 30 09:46:33 2011] 4769.350000 total counts/ 1253.300000 bgd. counts: snr = 99.317899
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000098 pixels
  Position = (288.6, 276.0) = 17 0 58.46 -46 11 8.6
  Extent = 5.8 (5.6-5.9)", rotation angle = 0
  Source counts = 3516.1 +/- 69.1
  Background counts = 1253.3
  Rate = 0.1 +/- 0.002
[Fri Dec 30 09:46:33 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:46:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:46:33 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:46:33 2011] Source does appear to be extended
[Fri Dec 30 09:46:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:46:50 2011] Counts = 3516.050000, rescaling region sizes by 2.000000
[Fri Dec 30 09:46:50 2011] XMMSAS src. selection expression = ellipse(25061.804800, 23961.954000, 691.197620, 691.197620, 0.000000, X, Y)
[Fri Dec 30 09:46:50 2011] Writing source region out to fullrun_pn_xmm0510990101_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 30 09:46:50 2011] Extracting stamp from image fullrun_pn_xmm0510990101_pi300-10000_cl_sm2.00.img.gz, (249, 236) - (328, 316)
[Fri Dec 30 09:46:50 2011] XMMSAS bgd. selection expression = annulus(25061.804800, 23961.954000, 2303.992066, 4607.984133, X, Y) && !ellipse(23444.672180, 27912.147200, 365.944811, 365.944811, 0.000000, X, Y) && !ellipse(22609.941800, 25548.440800, 666.788019, 666.788019, 0.000000, X, Y) && !ellipse(26239.852100, 22365.326600, 443.183213, 443.183213, 0.000000, X, Y) && !ellipse(25272.694946, 21743.655228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29856.059600, 19442.240400, 397.431211, 397.431211, 0.000000, X, Y) && !ellipse(20121.123016, 18594.697556, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 09:46:50 2011] Writing fullrun_pn_xmm0510990101_pi300-10000_pass1_cl_src1.gif
[Fri Dec 30 09:47:07 2011] Mean detx,y = (175.94, -268.48) 
[Fri Dec 30 09:47:14 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 09:48:46 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 09:48:47 2011] Setting source spectrum file to fullrun_pn_xmm0510990101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 30 09:48:47 2011] Setting bgd. spectrum file to fullrun_pn_xmm0510990101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 30 11:38:27 2011] Updating aperture counts using extracted products
[Fri Dec 30 11:38:27 2011] Error reading totcts from fullrun_pn_xmm0510990101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 30 11:38:30 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 11:38:30 2011] Using photon index=1.80, rate=0.117, arf fullrun_pn_xmm0510990101_pi300-10000_pass1_cl_src1.arf
[Fri Dec 30 11:38:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 11:38:30 2011] Updating source flux to 2.8e-13
[Fri Dec 30 11:43:19 2011] Reading fit data from xmm0510990101/analysis//spectral/fullrun_pn_xmm0510990101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Dec 30 11:43:19 2011] Spectral fit parameter nH value = 1.58503e+22
[Fri Dec 30 11:43:19 2011] Spectral fit parameter PhoIndex value = 2.08379
[Fri Dec 30 11:43:19 2011] Failed to get F(0.3-8.0) from xmm0510990101/analysis//spectral/fullrun_pn_xmm0510990101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Dec 30 11:43:19 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 11:43:19 2011] Using Nh = 1.6e+22, photon index=2.08, rate=0.117, arf fullrun_pn_xmm0510990101_pi300-10000_pass1_cl_src1.arf
[Fri Dec 30 11:43:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 11:43:19 2011] Updating source flux to 6.6e-13