[Fri Dec 30 06:40:19 2011] Detection parameters:
  Position = (190.8, 298.8) = 17 1 39.41 -46 9 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.8 +/- 19.0
  Background counts = 103.4
  Rate = 0.004 +/- 0.0006

[Fri Dec 30 06:40:20 2011] Off-axis axis estimate = 7.80'
[Fri Dec 30 08:02:48 2011] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 08:02:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 08:02:48 2011] Initial guess for spatial extent in simple fitting = 10.33"
[Fri Dec 30 08:02:48 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.089
[Fri Dec 30 08:02:48 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.33"
[Fri Dec 30 08:22:16 2011] fullrun_mos2_xmm0510990101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Dec 30 08:22:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510990101_pi300-10000_cl_pass0_src2.csv
[Fri Dec 30 08:22:16 2011] fullrun_mos2_xmm0510990101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Dec 30 08:22:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510990101_pi300-10000_cl_pass0_src2.csv
[Fri Dec 30 08:22:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510990101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510990101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 08:22:16 2011] fullrun_mos2_xmm0510990101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Dec 30 08:22:16 2011] fullrun_mos2_xmm0510990101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Dec 30 08:22:16 2011] Fit fullrun_mos2_xmm0510990101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Dec 30 08:22:29 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.764845 pixels away
[Fri Dec 30 08:22:29 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:22:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:22:29 2011] Assessing source extent using major
[Fri Dec 30 08:22:29 2011] Source does appear to be extended
[Fri Dec 30 08:22:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:29:07 2011] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 09:29:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 09:29:07 2011] Initial guess for spatial extent in simple fitting = 10.33"
[Fri Dec 30 09:29:07 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.089
[Fri Dec 30 09:29:07 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 10.33"
[Fri Dec 30 09:46:25 2011] fullrun_mos2_xmm0510990101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Dec 30 09:46:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510990101_pi300-10000_cl_pass1_src2.csv
[Fri Dec 30 09:46:25 2011] fullrun_mos2_xmm0510990101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Dec 30 09:46:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510990101_pi300-10000_cl_pass1_src2.csv
[Fri Dec 30 09:46:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510990101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510990101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:46:25 2011] fullrun_mos2_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Dec 30 09:46:25 2011] fullrun_mos2_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Dec 30 09:46:25 2011] Fit fullrun_mos2_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Dec 30 09:46:39 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.997013 pixels away
[Fri Dec 30 09:46:39 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:46:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:46:39 2011] Assessing source extent using major
[Fri Dec 30 09:46:39 2011] Source does appear to be extended
[Fri Dec 30 09:46:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 11:23:23 2011] XMMSAS src. selection expression = ellipse(16551.126816, 25950.805359, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 11:23:23 2011] Writing source region out to fullrun_mos2_xmm0510990101_pi300-10000_pass1_cl_src5_src.reg
[Fri Dec 30 11:23:23 2011] Extracting stamp from image fullrun_mos2_xmm0510990101_pi300-10000_cl_sm2.00.img.gz, (153, 261) - (228, 336)
[Fri Dec 30 11:23:23 2011] XMMSAS bgd. selection expression = annulus(16551.126816, 25950.805359, 1087.500000, 2175.000000, X, Y)
[Fri Dec 30 11:23:23 2011] Writing fullrun_mos2_xmm0510990101_pi300-10000_pass1_cl_src5.gif
[Fri Dec 30 11:24:07 2011] Mean detx,y = (-7979.88, -3469.27) 
[Fri Dec 30 11:24:11 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 11:25:16 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 11:25:17 2011] Setting source spectrum file to fullrun_mos2_xmm0510990101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Dec 30 11:25:17 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0510990101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Dec 30 11:36:31 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 11:36:31 2011] rmf not generated due to insufficient counts
[Fri Dec 30 11:38:33 2011] Updating aperture counts using extracted products
[Fri Dec 30 11:38:33 2011] Error reading totcts from fullrun_mos2_xmm0510990101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Dec 30 11:38:34 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 11:38:34 2011] Using photon index=1.80, rate=0.00365, arf fullrun_mos2_xmm0510990101_pi300-10000_pass1_cl_src5.arf
[Fri Dec 30 11:38:34 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 11:38:34 2011] Updating source flux to 5.2e-14
[Fri Dec 30 11:40:37 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting