[Fri Dec 30 06:39:46 2011] Detection parameters:
  Position = (485.4, 272.0) = 16 59 36.01 -46 11 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.8 +/- 16.2
  Background counts = 52.8
  Rate = 0.002 +/- 0.0003

[Fri Dec 30 06:39:46 2011] Off-axis axis estimate = 13.69'
[Fri Dec 30 07:41:05 2011] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 07:41:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 07:41:05 2011] Initial guess for spatial extent in simple fitting = 13.27"
[Fri Dec 30 07:41:05 2011] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.110
[Fri Dec 30 07:41:05 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 13.27"
[Fri Dec 30 08:02:48 2011] fullrun_mos1_xmm0510990101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Dec 30 08:02:48 2011] fullrun_mos1_xmm0510990101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Dec 30 08:02:48 2011] Fit fullrun_mos1_xmm0510990101_pi300-10000_cl_pass0_src5 appears to have run properly
[Fri Dec 30 08:02:48 2011] fullrun_mos1_xmm0510990101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Dec 30 08:02:48 2011] fullrun_mos1_xmm0510990101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Dec 30 08:02:48 2011] Fit fullrun_mos1_xmm0510990101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Dec 30 08:22:27 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.539911 pixels away
[Fri Dec 30 08:22:27 2011] Spatial fit model total counts = 243.061000, observed total counts = 243.000000
[Fri Dec 30 08:22:27 2011] Offset between fit and detection position for source 2 = 2.864513 pixels
[Fri Dec 30 08:22:27 2011] Warning, changing simple spatial fit ID from 5 to 7
[Fri Dec 30 08:22:27 2011] 205.404000 total counts/ 103.288000 bgd. counts: snr = 10.047751
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.864513 pixels
  Position = (487.9, 270.6) = 16 59 34.98 -46 11 30.3
  Extent = 25.5 (23.7-26.4)", rotation angle = 0
  Source counts = 102.1 +/- 14.3
  Background counts = 103.3
  Rate = 0.003 +/- 0.0004
[Fri Dec 30 08:22:27 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 08:22:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 08:22:27 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 08:22:27 2011] Source does appear to be extended
[Fri Dec 30 08:22:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:22:27 2011] Source is confused with source 3
[Fri Dec 30 09:06:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 09:06:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 09:06:14 2011] Initial guess for spatial extent in simple fitting = 25.54"
[Fri Dec 30 09:06:14 2011] source mask rpix=5.9, npix_max = 162, mask sum = 138, frac = 0.850
[Fri Dec 30 09:06:14 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 25.54"
[Fri Dec 30 09:29:06 2011] fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Dec 30 09:29:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_src5.csv
[Fri Dec 30 09:29:06 2011] fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Dec 30 09:29:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_src5.csv
[Fri Dec 30 09:29:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:29:07 2011] fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Dec 30 09:29:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Dec 30 09:29:07 2011] fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Dec 30 09:29:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Dec 30 09:29:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510990101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:46:36 2011] Warning, spatial fit 5 centroid is now closest to src. 3
[Fri Dec 30 09:46:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:46:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:46:36 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:46:36 2011] Source does appear to be extended
[Fri Dec 30 09:46:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 10:58:35 2011] XMMSAS src. selection expression = ellipse(42399.098000, 23493.686000, 1532.406044, 1532.406044, 0.000000, X, Y)
[Fri Dec 30 10:58:35 2011] Writing source region out to fullrun_mos1_xmm0510990101_pi300-10000_pass1_cl_src2_src.reg
[Fri Dec 30 10:58:35 2011] Extracting stamp from image fullrun_mos1_xmm0510990101_pi300-10000_cl_sm2.00.img.gz, (400, 183) - (576, 359)
[Fri Dec 30 10:58:35 2011] XMMSAS bgd. selection expression = annulus(42399.098000, 23493.686000, 2554.010073, 5108.020147, X, Y) && !ellipse(41493.368103, 21059.600204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41968.095306, 23037.149658, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 10:58:35 2011] Writing fullrun_mos1_xmm0510990101_pi300-10000_pass1_cl_src2.gif
[Fri Dec 30 11:00:41 2011] Mean detx,y = (4166.52, -16506.22) 
[Fri Dec 30 11:00:44 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 11:02:49 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 11:02:49 2011] Setting source spectrum file to fullrun_mos1_xmm0510990101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 30 11:02:49 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0510990101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Dec 30 11:38:32 2011] Updating aperture counts using extracted products
[Fri Dec 30 11:38:32 2011] Error reading totcts from fullrun_mos1_xmm0510990101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 30 11:38:32 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 11:38:32 2011] Using photon index=1.80, rate=0.00262, arf fullrun_mos1_xmm0510990101_pi300-10000_pass1_cl_src2.arf
[Fri Dec 30 11:38:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 11:38:33 2011] Updating source flux to 8.9e-14
[Fri Dec 30 11:38:36 2011] Flag c found in src. 2 procflags, skipping spectral fitting