[Sun Jan  1 11:19:06 2012] Detection parameters:
  Position = (300.8, 252.1) = 13 12 32.83 -62 44 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.3 +/- 25.3
  Background counts = 202.3
  Rate = 0.003 +/- 0.0005

[Sun Jan  1 11:19:07 2012] Off-axis axis estimate = 3.36'
[Sun Jan  1 11:30:47 2012] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:30:47 2012] Initial guess for spatial extent in simple fitting = 8.11"
[Sun Jan  1 11:30:47 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.894
[Sun Jan  1 11:30:47 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 8.11"
[Sun Jan  1 17:16:52 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src65.ximg exists
[Sun Jan  1 17:16:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src65.csv
[Sun Jan  1 17:16:52 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src65_1.ximg exists
[Sun Jan  1 17:16:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src65.csv
[Sun Jan  1 17:16:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 17:16:55 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sun Jan  1 17:16:55 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sun Jan  1 17:16:55 2012] Fit fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Sun Jan  1 22:15:58 2012] Spatial fit model total counts = 4376.220000, observed total counts = 4371.000000
[Sun Jan  1 22:15:58 2012] Offset between fit and detection position for source 73 = 3.946815 pixels
[Sun Jan  1 22:15:58 2012] Warning, changing simple spatial fit ID from 65 to 63
[Sun Jan  1 22:15:58 2012] 3913.147000 total counts/ 3001.680000 bgd. counts: snr = 16.636377
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 3.946815 pixels
  Position = (299.7, 255.9) = 13 12 33.51 -62 44 23.3
  Extent = 15.5 (15.4-30.9)", rotation angle = 0
  Source counts = 911.5 +/- 62.6
  Background counts = 3001.7
  Rate = 0.02 +/- 0.001
[Sun Jan  1 22:15:58 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:15:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:15:58 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 22:15:58 2012] Source does appear to be extended
[Sun Jan  1 22:15:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 22:15:58 2012] Source is confused with source 62
[Sun Jan  1 22:16:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 22:16:43 2012] Initial guess for spatial extent in simple fitting = 15.46"
[Sun Jan  1 22:16:43 2012] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.973
[Sun Jan  1 22:16:43 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 15.46"
[Mon Jan  2 05:30:27 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src61.ximg exists
[Mon Jan  2 05:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src61.csv
[Mon Jan  2 05:30:27 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src61_1.ximg exists
[Mon Jan  2 05:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src61.csv
[Mon Jan  2 05:30:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 05:30:29 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Mon Jan  2 05:30:29 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Mon Jan  2 05:30:29 2012] Fit fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Mon Jan  2 12:05:37 2012] Spatial fit model total counts = 4336.280000, observed total counts = 4371.000000
[Mon Jan  2 12:05:37 2012] Offset between fit and detection position for source 73 = 0.419701 pixels
[Mon Jan  2 12:05:37 2012] Warning, changing simple spatial fit ID from 61 to 59
[Mon Jan  2 12:05:37 2012] 3408.660000 total counts/ 1969.720000 bgd. counts: snr = 32.422048
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 0.419701 pixels
  Position = (299.3, 255.9) = 13 12 33.78 -62 44 23.3
  Extent = 15.5 (15.4-30.9)", rotation angle = 0
  Source counts = 1438.9 +/- 58.4
  Background counts = 1969.7
  Rate = 0.02 +/- 0.001
[Mon Jan  2 12:05:37 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:05:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:05:37 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 12:05:37 2012] Source does appear to be extended
[Mon Jan  2 12:05:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 12:06:25 2012] Counts = 1438.940000, rescaling region sizes by 2.000000
[Mon Jan  2 12:06:25 2012] XMMSAS src. selection expression = ellipse(25987.254000, 22213.930000, 1855.704053, 1855.704053, 0.000000, X, Y)
[Mon Jan  2 12:06:25 2012] Writing source region out to fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src73_src.reg
[Mon Jan  2 12:06:25 2012] Extracting stamp from image fullrun_pn_xmm0510980101_pi300-10000_cl_sm2.00.img.gz, (193, 149) - (406, 363)
[Mon Jan  2 12:06:25 2012] XMMSAS bgd. selection expression = annulus(25987.254000, 22213.930000, 6185.680178, 12371.360356, X, Y) && !ellipse(25204.025800, 23961.251000, 1430.500841, 1430.500841, 0.000000, X, Y) && !ellipse(26390.342804, 29738.961334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27673.544600, 27475.535000, 554.724816, 471.695214, 39.909000, X, Y) && !ellipse(26241.334100, 26099.473000, 460.351213, 460.351213, 0.000000, X, Y) && !ellipse(26846.702220, 25106.171000, 896.816026, 896.816026, 0.000000, X, Y) && !ellipse(29400.377600, 23358.610400, 456.012013, 456.012013, 0.000000, X, Y) && !ellipse(31416.451324, 18913.359482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16795.805048, 18289.754155, 440.801420, 389.197145, 51.591862, X, Y) && !ellipse(26503.441400, 34023.030600, 623.673618, 394.596011, 53.823000, X, Y) && !ellipse(25388.804688, 11278.684677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33019.194275, 32645.522797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19017.435303, 29606.541748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25918.358246, 14019.274948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23084.896800, 26710.112000, 1609.352046, 1609.352046, 0.000000, X, Y) && !ellipse(27635.878000, 25286.896000, 1190.792034, 1190.792034, 0.000000, X, Y) && !ellipse(25083.134000, 24160.516000, 1182.376034, 1182.376034, 0.000000, X, Y) && !ellipse(27249.770000, 23402.446000, 1178.736034, 1178.736034, 0.000000, X, Y) && !ellipse(26441.199890, 35057.417786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22598.668600, 34898.214000, 415.519212, 415.519212, 0.000000, X, Y) && !ellipse(25345.100000, 35020.642000, 1601.040046, 1601.040046, 0.000000, X, Y) && !ellipse(22771.397156, 34319.497528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22904.811800, 33742.135200, 662.192019, 662.192019, 0.000000, X, Y) && !ellipse(23224.070638, 32362.197560, 1444.720042, 353.730726, 74.867792, X, Y) && !ellipse(23244.327000, 32185.940000, 1798.448052, 570.816016, 90.000000, X, Y) && !ellipse(25849.948761, 31794.721313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23326.458720, 31916.409600, 1874.496054, 438.336813, 76.082700, X, Y) && !ellipse(22317.079140, 31105.994800, 391.209611, 391.209611, 0.000000, X, Y) && !ellipse(23518.121000, 31121.177400, 654.240819, 654.240819, 0.000000, X, Y) && !ellipse(23712.798859, 30486.259155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.035400, 30485.217600, 454.798413, 454.798413, 0.000000, X, Y) && !ellipse(23802.405600, 29995.558000, 510.625615, 510.625615, 0.000000, X, Y) && !ellipse(23842.439200, 29733.604000, 1010.008029, 316.984009, 80.238000, X, Y) && !ellipse(23850.666000, 27875.836000, 1212.672035, 1212.672035, 0.000000, X, Y) && !ellipse(24300.654286, 27738.152063, 1191.688034, 328.838453, 74.948397, X, Y) && !ellipse(24339.830559, 27587.313231, 1163.000033, 341.498403, 76.095423, X, Y) && !ellipse(24526.077800, 26868.000000, 1163.000033, 424.152012, 71.949000, X, Y) && !ellipse(27577.878000, 26874.452000, 1123.904032, 1123.904032, 0.000000, X, Y) && !ellipse(21695.020000, 26841.932000, 1282.280037, 1282.280037, 0.000000, X, Y) && !ellipse(27313.000000, 26218.557098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23891.652252, 25784.465118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.746000, 26004.442600, 712.215220, 712.215220, 0.000000, X, Y) && !ellipse(13686.448081, 25413.095448, 1004.355583, 576.272435, 89.904218, X, Y) && !ellipse(28055.622314, 24757.659088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28925.590000, 23696.240000, 1230.520035, 1230.520035, 0.000000, X, Y) && !ellipse(26723.543671, 23069.848999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26350.014600, 22813.612000, 1241.016036, 1241.016036, 0.000000, X, Y) && !ellipse(21598.584380, 23042.460200, 365.099211, 365.099211, 0.000000, X, Y) && !ellipse(27651.672882, 22715.999969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17470.757278, 14460.406738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17362.925800, 22503.256000, 633.397618, 633.397618, 0.000000, X, Y) && !ellipse(25231.000000, 22781.830000, 569.936016, 328.912809, 87.904000, X, Y) && !ellipse(23838.984436, 22429.665680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26529.354828, 22238.766418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.256600, 22476.078000, 2474.544071, 2474.544071, 0.000000, X, Y) && !ellipse(25858.226000, 21612.316000, 1237.272036, 1237.272036, 0.000000, X, Y) && !ellipse(17105.705353, 21880.162231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24673.072510, 22441.087616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16655.964806, 21555.625000, 568.960816, 568.960816, 0.000000, X, Y) && !ellipse(25537.706696, 16767.177170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20548.174000, 21401.586600, 1034.792030, 1034.792030, 0.000000, X, Y) && !ellipse(19074.453384, 21251.610596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36747.422000, 20089.538000, 1831.712053, 1831.712053, 0.000000, X, Y) && !ellipse(36769.476580, 19747.664200, 815.304023, 815.304023, 0.000000, X, Y)
[Mon Jan  2 12:06:25 2012] Writing fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src73.gif
[Mon Jan  2 15:13:51 2012] Mean detx,y = (-54.71, -917.45) 
[Mon Jan  2 15:14:11 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 15:20:36 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 15:20:37 2012] Setting source spectrum file to fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Mon Jan  2 15:20:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Tue Jan  3 07:01:00 2012] Updating aperture counts using extracted products
[Tue Jan  3 07:01:00 2012] Error reading totcts from fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Tue Jan  3 07:01:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 07:01:03 2012] Using photon index=1.80, rate=0.0244, arf fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src73.arf
[Tue Jan  3 07:01:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 07:01:03 2012] Updating source flux to 6e-14
[Tue Jan  3 07:13:24 2012] Flag c found in src. 73 procflags, skipping spectral fitting