[Sun Jan  1 11:19:05 2012] Detection parameters:
  Position = (278.6, 326.0) = 13 12 46.81 -62 39 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.1 +/- 25.9
  Background counts = 201.9
  Rate = 0.003 +/- 0.0005

[Sun Jan  1 11:19:07 2012] Off-axis axis estimate = 2.46'
[Sun Jan  1 11:30:47 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:30:47 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Sun Jan  1 11:30:47 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.978
[Sun Jan  1 11:30:47 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.66"
[Sun Jan  1 17:16:52 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src39.ximg exists
[Sun Jan  1 17:16:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src39.csv
[Sun Jan  1 17:16:52 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Jan  1 17:16:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src39.csv
[Sun Jan  1 17:16:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 17:16:54 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Jan  1 17:16:54 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Jan  1 17:16:54 2012] Fit fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sun Jan  1 22:15:58 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 10.922179 pixels away
[Sun Jan  1 22:15:58 2012] Source 44 is offset by 1.355464 and -5.224331 pixels which is larger than
2 X fitted extent = 4.912552 x 4.912552, not incorporating fit results
[Sun Jan  1 22:15:58 2012] Spatial fit model total counts = 2904.760000, observed total counts = 2900.000000
[Sun Jan  1 22:15:58 2012] Offset between fit and detection position for source 44 = 6.398361 pixels
[Sun Jan  1 22:15:58 2012] Warning, changing simple spatial fit ID from 39 to 43
[Sun Jan  1 22:15:58 2012] 2732.117000 total counts/ 2559.130000 bgd. counts: snr = 3.419537
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 6.398361 pixels
  Position = (274.7, 321.0) = 13 12 49.29 -62 39 40.1
  Extent = 15.2 (15.1-30.3)", rotation angle = 0
  Source counts = 173.0 +/- 52.3
  Background counts = 2559.1
  Rate = 0.003 +/- 0.0009
[Sun Jan  1 22:15:58 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:15:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:15:58 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 22:15:58 2012] Source does appear to be extended
[Sun Jan  1 22:15:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 22:15:58 2012] Source is confused with source 45
[Sun Jan  1 22:15:58 2012] Source is confused with source 47
[Sun Jan  1 22:16:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 22:16:43 2012] Initial guess for spatial extent in simple fitting = 15.16"
[Sun Jan  1 22:16:43 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.008
[Sun Jan  1 22:16:43 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 15.16"
[Mon Jan  2 05:30:26 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src36.ximg exists
[Mon Jan  2 05:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src36.csv
[Mon Jan  2 05:30:26 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src36_1.ximg exists
[Mon Jan  2 05:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src36.csv
[Mon Jan  2 05:30:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 05:30:29 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Mon Jan  2 05:30:29 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Mon Jan  2 05:30:29 2012] Fit fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Mon Jan  2 12:05:37 2012] Source 44 is offset by -2.677379 and -8.523195 pixels which is larger than
2 X fitted extent = 4.332258 x 4.332258, not incorporating fit results
[Mon Jan  2 12:05:37 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:05:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:05:37 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 12:05:37 2012] Source does appear to be extended
[Mon Jan  2 12:05:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 12:06:23 2012] XMMSAS src. selection expression = ellipse(23850.666000, 27875.836000, 909.504026, 909.504026, 0.000000, X, Y)
[Mon Jan  2 12:06:23 2012] Writing source region out to fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src44_src.reg
[Mon Jan  2 12:06:23 2012] Extracting stamp from image fullrun_pn_xmm0510980101_pi300-10000_cl_sm2.00.img.gz, (222, 269) - (327, 373)
[Mon Jan  2 12:06:23 2012] XMMSAS bgd. selection expression = annulus(23850.666000, 27875.836000, 1515.840044, 3031.680087, X, Y) && !ellipse(25204.025800, 23961.251000, 1430.500841, 1430.500841, 0.000000, X, Y) && !ellipse(26390.342804, 29738.961334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26241.334100, 26099.473000, 460.351213, 460.351213, 0.000000, X, Y) && !ellipse(26846.702220, 25106.171000, 896.816026, 896.816026, 0.000000, X, Y) && !ellipse(23084.896800, 26710.112000, 1609.352046, 1609.352046, 0.000000, X, Y) && !ellipse(27635.878000, 25286.896000, 1190.792034, 1190.792034, 0.000000, X, Y) && !ellipse(25083.134000, 24160.516000, 1182.376034, 1182.376034, 0.000000, X, Y) && !ellipse(23244.327000, 32185.940000, 1798.448052, 570.816016, 90.000000, X, Y) && !ellipse(23326.458720, 31916.409600, 1874.496054, 438.336813, 76.082700, X, Y) && !ellipse(22317.079140, 31105.994800, 391.209611, 391.209611, 0.000000, X, Y) && !ellipse(23518.121000, 31121.177400, 654.240819, 654.240819, 0.000000, X, Y) && !ellipse(23712.798859, 30486.259155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23802.405600, 29995.558000, 510.625615, 510.625615, 0.000000, X, Y) && !ellipse(23842.439200, 29733.604000, 1010.008029, 316.984009, 80.238000, X, Y) && !ellipse(24300.654286, 27738.152063, 1191.688034, 328.838453, 74.948397, X, Y) && !ellipse(24339.830559, 27587.313231, 1163.000033, 341.498403, 76.095423, X, Y) && !ellipse(24526.077800, 26868.000000, 1163.000033, 424.152012, 71.949000, X, Y) && !ellipse(27577.878000, 26874.452000, 1123.904032, 1123.904032, 0.000000, X, Y) && !ellipse(21695.020000, 26841.932000, 1282.280037, 1282.280037, 0.000000, X, Y) && !ellipse(27313.000000, 26218.557098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23891.652252, 25784.465118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.746000, 26004.442600, 712.215220, 712.215220, 0.000000, X, Y) && !ellipse(25989.256600, 22476.078000, 2474.544071, 2474.544071, 0.000000, X, Y)
[Mon Jan  2 12:06:23 2012] Writing fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src44.gif
[Mon Jan  2 14:04:22 2012] Mean detx,y = (484.05, 3758.00) 
[Mon Jan  2 14:04:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 14:05:20 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 14:05:21 2012] Setting source spectrum file to fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Mon Jan  2 14:05:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue Jan  3 07:00:58 2012] Updating aperture counts using extracted products
[Tue Jan  3 07:00:58 2012] Error reading totcts from fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Jan  3 07:01:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 07:01:02 2012] Using photon index=1.80, rate=0.00294, arf fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src44.arf
[Tue Jan  3 07:01:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 07:01:02 2012] Updating source flux to 8.3e-15
[Tue Jan  3 07:13:24 2012] Flag b found in src. 44 procflags, skipping spectral fitting
[Tue Jan  3 07:13:24 2012] Flag c found in src. 44 procflags, skipping spectral fitting