[Sun Jan  1 11:19:04 2012] Detection parameters:
  Position = (266.3, 378.9) = 13 12 54.57 -62 35 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.2 +/- 25.7
  Background counts = 154.0
  Rate = 0.006 +/- 0.0007

[Sun Jan  1 11:19:07 2012] Off-axis axis estimate = 6.28'
[Sun Jan  1 11:30:47 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:30:47 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Sun Jan  1 11:30:47 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.029
[Sun Jan  1 11:30:47 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.57"
[Sun Jan  1 17:16:51 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src26.ximg exists
[Sun Jan  1 17:16:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src26.csv
[Sun Jan  1 17:16:51 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Jan  1 17:16:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src26.csv
[Sun Jan  1 17:16:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 17:16:53 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Jan  1 17:16:53 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Jan  1 17:16:53 2012] Fit fullrun_pn_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Jan  1 22:15:58 2012] Spatial fit model total counts = 1459.220000, observed total counts = 1460.000000
[Sun Jan  1 22:15:58 2012] Offset between fit and detection position for source 30 = 4.002974 pixels
[Sun Jan  1 22:15:58 2012] 1494.628000 total counts/ 784.473000 bgd. counts: snr = 25.355031
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 4.002974 pixels
  Position = (267.2, 375.0) = 13 12 53.98 -62 35 44.9
  Extent = 19.1 (19.1-38.3)", rotation angle = 0
  Source counts = 710.2 +/- 38.7
  Background counts = 784.5
  Rate = 0.01 +/- 0.0007
[Sun Jan  1 22:15:58 2012] Spatial fit model total counts = 1494.360000, observed total counts = 1488.000000
[Sun Jan  1 22:15:58 2012] Offset between fit and detection position for source 30 = 2.507046 pixels
[Sun Jan  1 22:15:58 2012] Warning, changing simple spatial fit ID from 26 to 27
[Sun Jan  1 22:15:58 2012] 1363.026000 total counts/ 1059.840000 bgd. counts: snr = 9.312987
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 2.507046 pixels
  Position = (267.5, 372.5) = 13 12 53.79 -62 35 55.8
  Extent = 18.1" x 4.4", rotation angle = 75
  Source counts = 303.2 +/- 36.9
  Background counts = 1059.8
  Rate = 0.005 +/- 0.0006
[Sun Jan  1 22:15:58 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:15:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:15:58 2012] Assessing source extent using major
[Sun Jan  1 22:15:58 2012] Source does appear to be extended
[Sun Jan  1 22:15:58 2012] Computing asymmetry using major and minor axis, asym = 4.08
[Sun Jan  1 22:15:58 2012] Source is asymmetric
[Sun Jan  1 22:15:58 2012] Source is confused with source 31
[Sun Jan  1 22:15:58 2012] Source is confused with source 33
[Sun Jan  1 22:16:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 22:16:43 2012] Initial guess for spatial extent in simple fitting = 11.24"
[Sun Jan  1 22:16:43 2012] source mask rpix=2.6, npix_max = 38, mask sum = 49, frac = 1.288
[Sun Jan  1 22:16:43 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 11.24"
[Mon Jan  2 05:30:26 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src26.ximg exists
[Mon Jan  2 05:30:26 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Jan  2 05:30:26 2012] Fit fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_src26 appears to have run properly
[Mon Jan  2 05:30:28 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Jan  2 05:30:28 2012] fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Jan  2 05:30:28 2012] Fit fullrun_pn_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Jan  2 12:05:37 2012] Warning, spatial fit 26 centroid is now closest to src. 31
[Mon Jan  2 12:05:37 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:05:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:05:37 2012] Assessing source extent using major
[Mon Jan  2 12:05:37 2012] Source does appear to be extended
[Mon Jan  2 12:05:37 2012] Computing asymmetry using major and minor axis, asym = 4.08
[Mon Jan  2 12:05:37 2012] Source is asymmetric
[Mon Jan  2 12:06:22 2012] XMMSAS src. selection expression = ellipse(23224.070638, 32362.197560, 1083.540031, 265.298045, 74.867792, X, Y)
[Mon Jan  2 12:06:22 2012] Writing source region out to fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src30_src.reg
[Mon Jan  2 12:06:22 2012] Extracting stamp from image fullrun_pn_xmm0510980101_pi300-10000_cl_sm2.00.img.gz, (205, 310) - (330, 435)
[Mon Jan  2 12:06:22 2012] XMMSAS bgd. selection expression = annulus(23224.070638, 32362.197560, 1805.900052, 3611.800104, X, Y) && !ellipse(26390.342804, 29738.961334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.441400, 34023.030600, 623.673618, 394.596011, 53.823000, X, Y) && !ellipse(19017.435303, 29606.541748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22277.036011, 36409.478180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22419.664200, 35905.444000, 793.036823, 793.036823, 0.000000, X, Y) && !ellipse(20940.787643, 35780.496429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26441.199890, 35057.417786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22598.668600, 34898.214000, 415.519212, 415.519212, 0.000000, X, Y) && !ellipse(25345.100000, 35020.642000, 1601.040046, 1601.040046, 0.000000, X, Y) && !ellipse(22771.397156, 34319.497528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22904.811800, 33742.135200, 662.192019, 662.192019, 0.000000, X, Y) && !ellipse(23244.327000, 32185.940000, 1798.448052, 570.816016, 90.000000, X, Y) && !ellipse(25849.948761, 31794.721313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23326.458720, 31916.409600, 1874.496054, 438.336813, 76.082700, X, Y) && !ellipse(22317.079140, 31105.994800, 391.209611, 391.209611, 0.000000, X, Y) && !ellipse(23518.121000, 31121.177400, 654.240819, 654.240819, 0.000000, X, Y) && !ellipse(23712.798859, 30486.259155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23802.405600, 29995.558000, 510.625615, 510.625615, 0.000000, X, Y) && !ellipse(23842.439200, 29733.604000, 1010.008029, 316.984009, 80.238000, X, Y) && !ellipse(23850.666000, 27875.836000, 1212.672035, 1212.672035, 0.000000, X, Y) && !ellipse(24300.654286, 27738.152063, 1191.688034, 328.838453, 74.948397, X, Y)
[Mon Jan  2 12:06:22 2012] Writing fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src30.gif
[Mon Jan  2 13:44:03 2012] Mean detx,y = (86.27, 8358.92) 
[Mon Jan  2 13:44:13 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 13:45:36 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 13:45:36 2012] Setting source spectrum file to fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Jan  2 13:45:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue Jan  3 07:00:58 2012] Updating aperture counts using extracted products
[Tue Jan  3 07:00:58 2012] Error reading totcts from fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Jan  3 07:01:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 07:01:02 2012] Using photon index=1.80, rate=0.00515, arf fullrun_pn_xmm0510980101_pi300-10000_pass1_cl_src30.arf
[Tue Jan  3 07:01:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 07:01:02 2012] Updating source flux to 2.3e-14
[Tue Jan  3 07:13:24 2012] Flag c found in src. 30 procflags, skipping spectral fitting