[Sun Jan  1 11:21:00 2012] Detection parameters:
  Position = (139.3, 244.9) = 13 14 15.07 -62 45 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.5 +/- 15.9
  Background counts = 68.6
  Rate = 0.001 +/- 0.0002

[Sun Jan  1 11:21:00 2012] Off-axis axis estimate = 12.17'
[Sun Jan  1 19:00:05 2012] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 19:00:05 2012] Initial guess for spatial extent in simple fitting = 12.51"
[Sun Jan  1 19:00:05 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.921
[Sun Jan  1 19:00:05 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 12.51"
[Sun Jan  1 22:15:32 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src38.ximg exists
[Sun Jan  1 22:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src38.csv
[Sun Jan  1 22:15:32 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Jan  1 22:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src38.csv
[Sun Jan  1 22:15:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 22:15:33 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Jan  1 22:15:33 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Jan  1 22:15:33 2012] Fit fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sun Jan  1 22:16:17 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 10.994785 pixels away
[Sun Jan  1 22:16:17 2012] Spatial fit model total counts = 703.947000, observed total counts = 703.000000
[Sun Jan  1 22:16:17 2012] Offset between fit and detection position for source 38 = 2.405884 pixels
[Sun Jan  1 22:16:17 2012] Warning, changing simple spatial fit ID from 38 to 39
[Sun Jan  1 22:16:17 2012] 694.203500 total counts/ 678.330000 bgd. counts: snr = 0.609470
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 2.405884 pixels
  Position = (141.7, 245.0) = 13 14 13.55 -62 45 8.5
  Extent = 6.6 (4.4-10.4)" x 3.6 (3.2-18.8)", rotation angle = 13
  Source counts = 15.9 +/- 26.3
  Background counts = 678.3
  Rate = 0.0002 +/- 0.0004
  Deleting source due to low Poisson probability