[Sun Jan  1 11:20:59 2012] Detection parameters:
  Position = (282.4, 271.2) = 13 12 44.42 -62 43 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.3 +/- 24.8
  Background counts = 126.1
  Rate = 0.003 +/- 0.0005

[Sun Jan  1 11:21:00 2012] Off-axis axis estimate = 2.29'
[Sun Jan  1 19:00:05 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 19:00:05 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Sun Jan  1 19:00:05 2012] source mask rpix=1.7, npix_max = 20, mask sum = 11, frac = 0.547
[Sun Jan  1 19:00:05 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.57"
[Sun Jan  1 22:15:31 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src18.ximg exists
[Sun Jan  1 22:15:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src18.csv
[Sun Jan  1 22:15:31 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Jan  1 22:15:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src18.csv
[Sun Jan  1 22:15:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 22:15:32 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Jan  1 22:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jan  1 22:15:32 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Jan  1 22:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jan  1 22:15:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 22:16:17 2012] Source 35 is offset by -6.533287 and -5.279810 pixels which is larger than
2 X fitted extent = 1.895586 x 1.895586, not incorporating fit results
[Sun Jan  1 22:16:17 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:16:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:16:17 2012] Assessing source extent using major
[Sun Jan  1 22:16:17 2012] Source does appear to be extended
[Sun Jan  1 22:16:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 22:16:17 2012] Source is confused with source 15
[Mon Jan  2 07:12:17 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 07:12:17 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Mon Jan  2 07:12:17 2012] source mask rpix=1.7, npix_max = 20, mask sum = 11, frac = 0.547
[Mon Jan  2 07:12:17 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.57"
[Mon Jan  2 12:05:11 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src18.ximg exists
[Mon Jan  2 12:05:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src18.csv
[Mon Jan  2 12:05:11 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Jan  2 12:05:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src18.csv
[Mon Jan  2 12:05:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 12:05:12 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Jan  2 12:05:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jan  2 12:05:12 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Jan  2 12:05:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jan  2 12:05:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 12:05:55 2012] Source 35 is offset by -8.031285 and -5.038665 pixels which is larger than
2 X fitted extent = 2.808156 x 2.808156, not incorporating fit results
[Mon Jan  2 12:05:55 2012] Warning, spatial fit 18 centroid is now closest to src. 31
[Mon Jan  2 12:05:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:05:55 2012] Assessing source extent using major
[Mon Jan  2 12:05:55 2012] Source does appear to be extended
[Mon Jan  2 12:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 04:41:53 2012] XMMSAS src. selection expression = ellipse(24523.058044, 23544.042542, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan  3 04:41:53 2012] Writing source region out to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src35_src.reg
[Tue Jan  3 04:41:53 2012] Extracting stamp from image fullrun_mos2_xmm0510980101_pi300-10000_cl_sm2.00.img.gz, (245, 234) - (320, 309)
[Tue Jan  3 04:41:53 2012] XMMSAS bgd. selection expression = annulus(24523.058044, 23544.042542, 1087.500000, 2175.000000, X, Y) && !ellipse(25209.166000, 23969.451400, 1359.069639, 1359.069639, 0.000000, X, Y) && !ellipse(26929.007800, 25152.974000, 1102.672032, 641.100018, 44.445000, X, Y) && !ellipse(27043.551697, 23785.690033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24045.952400, 24415.527400, 565.638416, 565.638416, 0.000000, X, Y) && !ellipse(26264.706818, 26111.046997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23155.728000, 26840.856000, 1209.656035, 1209.656035, 0.000000, X, Y) && !ellipse(24610.838623, 23097.416168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26180.194580, 25616.335388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24734.580000, 24275.962000, 366.160811, 366.160811, 0.000000, X, Y) && !ellipse(22984.683624, 26231.760559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27898.942000, 24768.598000, 1232.664035, 1232.664035, 0.000000, X, Y) && !ellipse(24765.045380, 22468.954803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.233948, 24999.779175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29023.374000, 24174.528000, 2463.872071, 2463.872071, 0.000000, X, Y)
[Tue Jan  3 04:41:53 2012] Writing fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src35.gif
[Tue Jan  3 05:02:18 2012] Mean detx,y = (-377.30, 287.64) 
[Tue Jan  3 05:02:20 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 05:02:36 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 05:02:36 2012] Setting source spectrum file to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jan  3 05:02:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue Jan  3 06:01:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan  3 06:01:32 2012] rmf not generated due to insufficient counts
[Tue Jan  3 07:01:07 2012] Updating aperture counts using extracted products
[Tue Jan  3 07:01:07 2012] Error reading totcts from fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jan  3 07:01:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 07:01:09 2012] Using photon index=1.80, rate=0.00292, arf fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src35.arf
[Tue Jan  3 07:01:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 07:01:09 2012] Updating source flux to 2.8e-14
[Tue Jan  3 07:06:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting