[Sun Jan  1 11:20:59 2012] Detection parameters:
  Position = (327.1, 278.0) = 13 12 16.20 -62 42 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.5 +/- 18.6
  Background counts = 106.5
  Rate = 0.001 +/- 0.0003

[Sun Jan  1 11:21:00 2012] Off-axis axis estimate = 2.55'
[Sun Jan  1 19:00:05 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 19:00:05 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Sun Jan  1 19:00:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776
[Sun Jan  1 19:00:05 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 7.70"
[Sun Jan  1 22:15:32 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src36.ximg exists
[Sun Jan  1 22:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src36.csv
[Sun Jan  1 22:15:32 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun Jan  1 22:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src36.csv
[Sun Jan  1 22:15:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 22:15:33 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun Jan  1 22:15:33 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun Jan  1 22:15:33 2012] Fit fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Sun Jan  1 22:16:17 2012] Warning, spatial fit 36 centroid is now closest to src. 32
[Sun Jan  1 22:16:17 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:16:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:16:17 2012] Assessing source extent using major
[Sun Jan  1 22:16:17 2012] Source does appear to be extended
[Sun Jan  1 22:16:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 22:16:17 2012] Source is confused with source 32
[Mon Jan  2 07:12:17 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 07:12:17 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Mon Jan  2 07:12:17 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776
[Mon Jan  2 07:12:17 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 7.70"
[Mon Jan  2 12:05:12 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src33.ximg exists
[Mon Jan  2 12:05:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src33.csv
[Mon Jan  2 12:05:12 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon Jan  2 12:05:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src33.csv
[Mon Jan  2 12:05:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 12:05:12 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon Jan  2 12:05:12 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon Jan  2 12:05:12 2012] Fit fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Mon Jan  2 12:05:55 2012] Source 33 is offset by 7.030995 and -3.019582 pixels which is larger than
2 X fitted extent = 1.252708 x 1.252708, not incorporating fit results
[Mon Jan  2 12:05:55 2012] Spatial fit model total counts = 3760.830000, observed total counts = 3742.000000
[Mon Jan  2 12:05:55 2012] Offset between fit and detection position for source 33 = 7.122116 pixels
[Mon Jan  2 12:05:55 2012] Warning, changing simple spatial fit ID from 33 to 21
[Mon Jan  2 12:05:55 2012] 3622.514000 total counts/ 2883.690000 bgd. counts: snr = 13.758361
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 7.122116 pixels
  Position = (334.2, 278.4) = 13 12 11.70 -62 42 45.1
  Extent = 30.8 (30.8-61.6)", rotation angle = 0
  Source counts = 738.8 +/- 60.2
  Background counts = 2883.7
  Rate = 0.01 +/- 0.0009
[Mon Jan  2 12:05:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:05:55 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 12:05:55 2012] Source does appear to be extended
[Mon Jan  2 12:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 04:41:54 2012] XMMSAS src. selection expression = ellipse(29023.374000, 24174.528000, 1847.904053, 1847.904053, 0.000000, X, Y)
[Tue Jan  3 04:41:54 2012] Writing source region out to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src33_src.reg
[Tue Jan  3 04:41:54 2012] Extracting stamp from image fullrun_mos2_xmm0510980101_pi300-10000_cl_sm2.00.img.gz, (228, 172) - (440, 385)
[Tue Jan  3 04:41:54 2012] XMMSAS bgd. selection expression = annulus(29023.374000, 24174.528000, 3079.840089, 6159.680177, X, Y) && !ellipse(25209.166000, 23969.451400, 1359.069639, 1359.069639, 0.000000, X, Y) && !ellipse(26929.007800, 25152.974000, 1102.672032, 641.100018, 44.445000, X, Y) && !ellipse(29414.452400, 23334.540800, 393.722411, 337.902410, 308.193000, X, Y) && !ellipse(31584.238556, 18659.545319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27043.551697, 23785.690033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27669.906000, 27472.427200, 448.144813, 448.144813, 0.000000, X, Y) && !ellipse(24045.952400, 24415.527400, 565.638416, 565.638416, 0.000000, X, Y) && !ellipse(26415.236820, 29717.830800, 367.878411, 367.878411, 0.000000, X, Y) && !ellipse(26264.706818, 26111.046997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23155.728000, 26840.856000, 1209.656035, 1209.656035, 0.000000, X, Y) && !ellipse(24610.838623, 23097.416168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23508.515594, 27174.295959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26180.194580, 25616.335388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24523.058044, 23544.042542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24734.580000, 24275.962000, 366.160811, 366.160811, 0.000000, X, Y) && !ellipse(22984.683624, 26231.760559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27898.942000, 24768.598000, 1232.664035, 1232.664035, 0.000000, X, Y) && !ellipse(24765.045380, 22468.954803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.233948, 24999.779175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33238.762800, 26564.123600, 659.589619, 535.519215, 218.198000, X, Y) && !ellipse(25422.480200, 16806.926200, 1635.176047, 1635.176047, 0.000000, X, Y)
[Tue Jan  3 04:41:54 2012] Writing fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src33.gif
[Tue Jan  3 05:08:50 2012] Mean detx,y = (3555.27, 770.30) 
[Tue Jan  3 05:08:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 05:11:02 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 05:11:02 2012] Setting source spectrum file to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jan  3 05:11:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Jan  3 07:01:08 2012] Updating aperture counts using extracted products
[Tue Jan  3 07:01:08 2012] Error reading totcts from fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jan  3 07:01:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 07:01:09 2012] Using photon index=1.80, rate=0.0112, arf fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src33.arf
[Tue Jan  3 07:01:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 07:01:09 2012] Updating source flux to 1.1e-13
[Tue Jan  3 07:06:50 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Tue Jan  3 07:06:50 2012] Flag c found in src. 33 procflags, skipping spectral fitting