[Sun Jan  1 11:20:58 2012] Detection parameters:
  Position = (290.3, 276.0) = 13 12 39.46 -62 42 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48003.4 +/- 260.3
  Background counts = 127.3
  Rate = 0.7 +/- 0.004

[Sun Jan  1 11:21:00 2012] Off-axis axis estimate = 1.73'
[Sun Jan  1 19:00:05 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 19:00:05 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Jan  1 19:00:05 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Sun Jan  1 19:00:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Jan  1 22:15:31 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jan  1 22:15:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src1.csv
[Sun Jan  1 22:15:31 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jan  1 22:15:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src1.csv
[Sun Jan  1 22:15:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 22:15:32 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jan  1 22:15:32 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jan  1 22:15:32 2012] Fit fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jan  1 22:16:17 2012] Spatial fit model total counts = 42029.200000, observed total counts = 42078.000000
[Sun Jan  1 22:16:17 2012] Offset between fit and detection position for source 2 = 0.047771 pixels
[Sun Jan  1 22:16:17 2012] 42266.200000 total counts/ 10146.200000 bgd. counts: snr = 318.877464
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.047771 pixels
  Position = (290.3, 276.1) = 13 12 39.44 -62 42 55.5
  Extent = 5.7 (5.6-5.7)", rotation angle = 0
  Source counts = 32120.0 +/- 205.6
  Background counts = 10146.2
  Rate = 0.5 +/- 0.003
[Sun Jan  1 22:16:17 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:16:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:16:17 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 22:16:17 2012] Source does appear to be extended
[Sun Jan  1 22:16:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 07:12:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 07:12:17 2012] Initial guess for spatial extent in simple fitting = 5.66"
[Mon Jan  2 07:12:17 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.924
[Mon Jan  2 07:12:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.66"
[Mon Jan  2 12:05:11 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jan  2 12:05:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src1.csv
[Mon Jan  2 12:05:11 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jan  2 12:05:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src1.csv
[Mon Jan  2 12:05:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 12:05:12 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jan  2 12:05:12 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jan  2 12:05:12 2012] Fit fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jan  2 12:05:55 2012] Warning, spatial fit 1 centroid is now closest to src. 35
[Mon Jan  2 12:05:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:05:55 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 12:05:55 2012] Source does appear to be extended
[Mon Jan  2 12:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 04:41:53 2012] Counts = 32120.000000, rescaling region sizes by 3.000000
[Tue Jan  3 04:41:53 2012] XMMSAS src. selection expression = ellipse(25209.166000, 23969.451400, 1019.302229, 1019.302229, 0.000000, X, Y)
[Tue Jan  3 04:41:53 2012] Writing source region out to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src2_src.reg
[Tue Jan  3 04:41:53 2012] Extracting stamp from image fullrun_mos2_xmm0510980101_pi300-10000_cl_sm2.00.img.gz, (232, 217) - (349, 335)
[Tue Jan  3 04:41:53 2012] XMMSAS bgd. selection expression = annulus(25209.166000, 23969.451400, 5096.511147, 10193.022293, X, Y) && !ellipse(26929.007800, 25152.974000, 1102.672032, 641.100018, 44.445000, X, Y) && !ellipse(26533.722000, 34020.508800, 565.462416, 565.462416, 0.000000, X, Y) && !ellipse(29414.452400, 23334.540800, 393.722411, 337.902410, 308.193000, X, Y) && !ellipse(31584.238556, 18659.545319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27043.551697, 23785.690033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27669.906000, 27472.427200, 448.144813, 448.144813, 0.000000, X, Y) && !ellipse(16794.295639, 18300.793777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24045.952400, 24415.527400, 565.638416, 565.638416, 0.000000, X, Y) && !ellipse(26415.236820, 29717.830800, 367.878411, 367.878411, 0.000000, X, Y) && !ellipse(26264.706818, 26111.046997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23155.728000, 26840.856000, 1209.656035, 1209.656035, 0.000000, X, Y) && !ellipse(24610.838623, 23097.416168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25935.145996, 13977.664001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25778.005080, 31801.929200, 284.072008, 284.072008, 0.000000, X, Y) && !ellipse(23508.515594, 27174.295959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26180.194580, 25616.335388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24523.058044, 23544.042542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24734.580000, 24275.962000, 366.160811, 366.160811, 0.000000, X, Y) && !ellipse(22984.683624, 26231.760559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27898.942000, 24768.598000, 1232.664035, 1232.664035, 0.000000, X, Y) && !ellipse(24765.045380, 22468.954803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.233948, 24999.779175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33800.477800, 35500.737600, 1853.048053, 1853.048053, 0.000000, X, Y) && !ellipse(33238.762800, 26564.123600, 659.589619, 535.519215, 218.198000, X, Y) && !ellipse(26047.379395, 34645.176697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25422.480200, 16806.926200, 1635.176047, 1635.176047, 0.000000, X, Y) && !ellipse(25301.878000, 35059.352000, 1251.016036, 1251.016036, 0.000000, X, Y) && !ellipse(29023.374000, 24174.528000, 2463.872071, 2463.872071, 0.000000, X, Y)
[Tue Jan  3 04:41:53 2012] Writing fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src2.gif
[Tue Jan  3 04:42:15 2012] Mean detx,y = (81.87, 110.39) 
[Tue Jan  3 04:42:20 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 04:48:03 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 04:48:03 2012] Setting source spectrum file to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan  3 04:48:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jan  3 07:01:06 2012] Updating aperture counts using extracted products
[Tue Jan  3 07:01:06 2012] Error reading totcts from fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan  3 07:01:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 07:01:08 2012] Using photon index=1.80, rate=0.486, arf fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src2.arf
[Tue Jan  3 07:01:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 07:01:08 2012] Updating source flux to 4.8e-12
[Tue Jan  3 07:13:24 2012] Reading fit data from xmm0510980101/analysis//spectral/fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jan  3 07:13:24 2012] Spectral fit parameter nH value = 2.63629e+22
[Tue Jan  3 07:13:24 2012] Spectral fit parameter PhoIndex value = 2.96066
[Tue Jan  3 07:13:24 2012] Failed to get F(0.3-8.0) from xmm0510980101/analysis//spectral/fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jan  3 07:13:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 07:13:24 2012] Using Nh = 2.6e+22, photon index=2.96, rate=0.486, arf fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src2.arf
[Tue Jan  3 07:13:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 07:13:24 2012] Updating source flux to 7.5e-12