[Sun Jan  1 11:20:58 2012] Detection parameters:
  Position = (264.0, 309.8) = 13 12 56.06 -62 40 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 278.0 +/- 25.5
  Background counts = 111.5
  Rate = 0.004 +/- 0.0004

[Sun Jan  1 11:21:00 2012] Off-axis axis estimate = 2.63'
[Sun Jan  1 19:00:05 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 19:00:05 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Sun Jan  1 19:00:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.769
[Sun Jan  1 19:00:05 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.74"
[Sun Jan  1 22:15:31 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jan  1 22:15:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src12.csv
[Sun Jan  1 22:15:31 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jan  1 22:15:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src12.csv
[Sun Jan  1 22:15:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 22:15:32 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jan  1 22:15:32 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jan  1 22:15:32 2012] Fit fullrun_mos2_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Jan  1 22:16:17 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 10.779587 pixels away
[Sun Jan  1 22:16:17 2012] Spatial fit model total counts = 1201.580000, observed total counts = 1205.000000
[Sun Jan  1 22:16:17 2012] Offset between fit and detection position for source 12 = 2.832267 pixels
[Sun Jan  1 22:16:17 2012] Warning, changing simple spatial fit ID from 12 to 16
[Sun Jan  1 22:16:17 2012] 1178.319000 total counts/ 757.547000 bgd. counts: snr = 15.287696
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 2.832267 pixels
  Position = (266.7, 309.1) = 13 12 54.34 -62 40 31.8
  Extent = 15.1 (15.1-30.2)", rotation angle = 0
  Source counts = 420.8 +/- 34.3
  Background counts = 757.5
  Rate = 0.006 +/- 0.0005
[Sun Jan  1 22:16:17 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:16:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:16:17 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 22:16:17 2012] Source does appear to be extended
[Sun Jan  1 22:16:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 22:16:17 2012] Source is confused with source 25
[Sun Jan  1 22:16:17 2012] Source is confused with source 28
[Mon Jan  2 07:12:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 07:12:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan  2 07:12:17 2012] Initial guess for spatial extent in simple fitting = 15.12"
[Mon Jan  2 07:12:17 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.012
[Mon Jan  2 07:12:17 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 15.12"
[Mon Jan  2 12:05:11 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src12.ximg exists
[Mon Jan  2 12:05:11 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Jan  2 12:05:11 2012] Fit fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_src12 appears to have run properly
[Mon Jan  2 12:05:12 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Jan  2 12:05:12 2012] fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jan  2 12:05:12 2012] Fit fullrun_mos2_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Jan  2 12:05:55 2012] Warning, spatial fit 12 centroid is now closest to src. 30
[Mon Jan  2 12:05:55 2012] Source 12 is offset by 2.850513 and -0.822828 pixels which is larger than
2 X fitted extent = 1.213706 x 1.213706, not incorporating fit results
[Mon Jan  2 12:05:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:05:55 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 12:05:55 2012] Source does appear to be extended
[Mon Jan  2 12:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 04:41:53 2012] XMMSAS src. selection expression = ellipse(23155.728000, 26840.856000, 907.242026, 907.242026, 0.000000, X, Y)
[Tue Jan  3 04:41:53 2012] Writing source region out to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src12_src.reg
[Tue Jan  3 04:41:53 2012] Extracting stamp from image fullrun_mos2_xmm0510980101_pi300-10000_cl_sm2.00.img.gz, (215, 257) - (319, 361)
[Tue Jan  3 04:41:53 2012] XMMSAS bgd. selection expression = annulus(23155.728000, 26840.856000, 1512.070044, 3024.140087, X, Y) && !ellipse(25209.166000, 23969.451400, 1359.069639, 1359.069639, 0.000000, X, Y) && !ellipse(26929.007800, 25152.974000, 1102.672032, 641.100018, 44.445000, X, Y) && !ellipse(27043.551697, 23785.690033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24045.952400, 24415.527400, 565.638416, 565.638416, 0.000000, X, Y) && !ellipse(26415.236820, 29717.830800, 367.878411, 367.878411, 0.000000, X, Y) && !ellipse(26264.706818, 26111.046997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.838623, 23097.416168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23508.515594, 27174.295959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26180.194580, 25616.335388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24523.058044, 23544.042542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24734.580000, 24275.962000, 366.160811, 366.160811, 0.000000, X, Y) && !ellipse(22984.683624, 26231.760559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.233948, 24999.779175, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 04:41:53 2012] Writing fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src12.gif
[Tue Jan  3 04:58:46 2012] Mean detx,y = (-1326.88, -3052.46) 
[Tue Jan  3 04:58:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 04:59:08 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 04:59:08 2012] Setting source spectrum file to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jan  3 04:59:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Jan  3 07:01:07 2012] Updating aperture counts using extracted products
[Tue Jan  3 07:01:07 2012] Error reading totcts from fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jan  3 07:01:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 07:01:08 2012] Using photon index=1.80, rate=0.00637, arf fullrun_mos2_xmm0510980101_pi300-10000_pass1_cl_src12.arf
[Tue Jan  3 07:01:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 07:01:08 2012] Updating source flux to 6e-14
[Tue Jan  3 07:06:50 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Tue Jan  3 07:06:50 2012] Flag c found in src. 12 procflags, skipping spectral fitting