[Sun Jan  1 11:19:57 2012] Detection parameters:
  Position = (308.9, 290.8) = 13 12 27.71 -62 41 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1177.2 +/- 47.1
  Background counts = 101.6
  Rate = 0.02 +/- 0.0007

[Sun Jan  1 11:19:59 2012] Off-axis axis estimate = 0.93'
[Sun Jan  1 17:16:55 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 17:16:55 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Sun Jan  1 17:16:55 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.920
[Sun Jan  1 17:16:55 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 6.90"
[Sun Jan  1 19:00:04 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jan  1 19:00:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src2.csv
[Sun Jan  1 19:00:04 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jan  1 19:00:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src2.csv
[Sun Jan  1 19:00:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 19:00:05 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jan  1 19:00:05 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jan  1 19:00:05 2012] Fit fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jan  1 22:16:06 2012] Spatial fit model total counts = 3506.590000, observed total counts = 3507.000000
[Sun Jan  1 22:16:06 2012] Offset between fit and detection position for source 3 = 1.994902 pixels
[Sun Jan  1 22:16:06 2012] 3474.440000 total counts/ 1935.780000 bgd. counts: snr = 34.971533
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.994902 pixels
  Position = (310.4, 289.6) = 13 12 26.71 -62 41 56.5
  Extent = 13.4 (12.6-13.8)", rotation angle = 0
  Source counts = 1538.7 +/- 58.9
  Background counts = 1935.8
  Rate = 0.02 +/- 0.0009
[Sun Jan  1 22:16:06 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:16:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:16:06 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 22:16:06 2012] Source does appear to be extended
[Sun Jan  1 22:16:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 22:16:06 2012] Source is confused with source 23
[Mon Jan  2 05:30:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 05:30:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan  2 05:30:29 2012] Initial guess for spatial extent in simple fitting = 13.39"
[Mon Jan  2 05:30:29 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.957
[Mon Jan  2 05:30:29 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.39"
[Mon Jan  2 07:12:16 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jan  2 07:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src2.csv
[Mon Jan  2 07:12:17 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jan  2 07:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src2.csv
[Mon Jan  2 07:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 07:12:17 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jan  2 07:12:17 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jan  2 07:12:17 2012] Fit fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Jan  2 12:05:44 2012] Warning, spatial fit 2 centroid is now closest to src. 20
[Mon Jan  2 12:05:44 2012] Spatial fit model total counts = 4599.680000, observed total counts = 4595.000000
[Mon Jan  2 12:05:44 2012] Offset between fit and detection position for source 3 = 0.126719 pixels
[Mon Jan  2 12:05:44 2012] Warning, changing simple spatial fit ID from 2 to 13
[Mon Jan  2 12:05:44 2012] 4413.840000 total counts/ 2770.670000 bgd. counts: snr = 31.216923
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.126719 pixels
  Position = (310.5, 289.7) = 13 12 26.70 -62 41 56.0
  Extent = 14.4 (12.0-15.8)", rotation angle = 0
  Source counts = 1643.2 +/- 66.4
  Background counts = 2770.7
  Rate = 0.03 +/- 0.001
[Mon Jan  2 12:05:44 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:05:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:05:44 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 12:05:44 2012] Source does appear to be extended
[Mon Jan  2 12:05:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 02:48:32 2012] Counts = 1643.170000, rescaling region sizes by 2.000000
[Tue Jan  3 02:48:32 2012] XMMSAS src. selection expression = ellipse(26961.798000, 25159.201000, 1722.276050, 1722.276050, 0.000000, X, Y)
[Tue Jan  3 02:48:32 2012] Writing source region out to fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jan  3 02:48:32 2012] Extracting stamp from image fullrun_mos1_xmm0510980101_pi300-10000_cl_sm2.00.img.gz, (211, 191) - (409, 389)
[Tue Jan  3 02:48:32 2012] XMMSAS bgd. selection expression = annulus(26961.798000, 25159.201000, 5740.920165, 11481.840330, X, Y) && !ellipse(25206.114000, 23969.843600, 1352.563239, 1352.563239, 0.000000, X, Y) && !ellipse(29401.348200, 23326.331000, 512.752015, 512.752015, 0.000000, X, Y) && !ellipse(27656.007600, 27483.635600, 376.063211, 376.063211, 0.000000, X, Y) && !ellipse(26240.542400, 26112.012000, 234.286407, 234.286407, 0.000000, X, Y) && !ellipse(27007.240000, 23663.522000, 238.306407, 238.306407, 0.000000, X, Y) && !ellipse(16814.033127, 18292.072006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31567.432400, 18693.978200, 750.408822, 750.408822, 0.000000, X, Y) && !ellipse(24558.854000, 24096.478000, 1190.712034, 1190.712034, 0.000000, X, Y) && !ellipse(22906.134000, 26923.978000, 297.935209, 297.935209, 0.000000, X, Y) && !ellipse(26419.498660, 29720.861600, 313.156809, 313.156809, 0.000000, X, Y) && !ellipse(25929.599640, 14006.459122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26075.602356, 25617.819550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27457.302000, 25017.545600, 1190.392034, 1190.392034, 0.000000, X, Y) && !ellipse(28460.786000, 25955.768000, 1164.568034, 1164.568034, 0.000000, X, Y) && !ellipse(23460.674622, 27255.558441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33596.344543, 35618.202454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.346161, 25524.261627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33048.866882, 32662.533569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26735.788666, 24045.755463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23077.357400, 26692.854000, 1147.912033, 1147.912033, 0.000000, X, Y) && !ellipse(25209.622070, 25612.440460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21572.915604, 23051.733734, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 02:48:32 2012] Writing fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src3.gif
[Tue Jan  3 02:55:48 2012] Mean detx,y = (-299.47, -1870.33) 
[Tue Jan  3 02:55:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 03:00:45 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 03:00:45 2012] Setting source spectrum file to fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan  3 03:00:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jan  3 07:01:04 2012] Updating aperture counts using extracted products
[Tue Jan  3 07:01:04 2012] Error reading totcts from fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan  3 07:01:05 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 07:01:05 2012] Using photon index=1.80, rate=0.0251, arf fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src3.arf
[Tue Jan  3 07:01:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 07:01:05 2012] Updating source flux to 2.3e-13
[Tue Jan  3 07:01:12 2012] Flag c found in src. 3 procflags, skipping spectral fitting