[Sun Jan  1 11:19:59 2012] Detection parameters:
  Position = (292.8, 130.5) = 13 12 37.87 -62 53 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.1 +/- 16.1
  Background counts = 53.7
  Rate = 0.001 +/- 0.0002

[Sun Jan  1 11:19:59 2012] Off-axis axis estimate = 12.18'
[Sun Jan  1 17:16:55 2012] Using EEF radius (= 12.52 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 17:16:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 17:16:55 2012] Initial guess for spatial extent in simple fitting = 12.52"
[Sun Jan  1 17:16:55 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.074
[Sun Jan  1 17:16:55 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 12.52"
[Sun Jan  1 19:00:05 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Jan  1 19:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src25.csv
[Sun Jan  1 19:00:05 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Jan  1 19:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src25.csv
[Sun Jan  1 19:00:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 19:00:05 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Jan  1 19:00:05 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Jan  1 19:00:05 2012] Fit fullrun_mos1_xmm0510980101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Jan  1 22:16:06 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 15.971591 pixels away
[Sun Jan  1 22:16:06 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 22:16:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 22:16:06 2012] Assessing source extent using major
[Sun Jan  1 22:16:06 2012] Source does appear to be extended
[Sun Jan  1 22:16:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 05:30:29 2012] Using EEF radius (= 12.52 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 05:30:29 2012] Initial guess for spatial extent in simple fitting = 12.52"
[Mon Jan  2 05:30:29 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.074
[Mon Jan  2 05:30:29 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 12.52"
[Mon Jan  2 07:12:17 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src22.ximg exists
[Mon Jan  2 07:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src22.csv
[Mon Jan  2 07:12:17 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Jan  2 07:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src22.csv
[Mon Jan  2 07:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 07:12:17 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Jan  2 07:12:17 2012] fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Jan  2 07:12:17 2012] Fit fullrun_mos1_xmm0510980101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Mon Jan  2 12:05:44 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 16.058864 pixels away
[Mon Jan  2 12:05:44 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 12:05:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 12:05:44 2012] Assessing source extent using major
[Mon Jan  2 12:05:44 2012] Source does appear to be extended
[Mon Jan  2 12:05:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 02:48:33 2012] XMMSAS src. selection expression = ellipse(25427.536255, 11305.390289, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan  3 02:48:33 2012] Writing source region out to fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src29_src.reg
[Tue Jan  3 02:48:33 2012] Extracting stamp from image fullrun_mos1_xmm0510980101_pi300-10000_cl_sm2.00.img.gz, (255, 93) - (330, 168)
[Tue Jan  3 02:48:33 2012] XMMSAS bgd. selection expression = annulus(25427.536255, 11305.390289, 1087.500000, 2175.000000, X, Y) && !ellipse(25929.599640, 14006.459122, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 02:48:33 2012] Writing fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src29.gif
[Tue Jan  3 03:09:34 2012] Mean detx,y = (12686.82, 2420.12) 
[Tue Jan  3 03:09:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 03:09:49 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 03:09:50 2012] Setting source spectrum file to fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jan  3 03:09:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Jan  3 04:41:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan  3 04:41:42 2012] rmf not generated due to insufficient counts
[Tue Jan  3 07:01:05 2012] Updating aperture counts using extracted products
[Tue Jan  3 07:01:05 2012] Error reading totcts from fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jan  3 07:01:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 07:01:06 2012] Using photon index=1.80, rate=0.00143, arf fullrun_mos1_xmm0510980101_pi300-10000_pass1_cl_src29.arf
[Tue Jan  3 07:01:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 07:01:06 2012] Updating source flux to 2.8e-14
[Tue Jan  3 07:01:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting