[Fri Mar 16 21:58:03 2012] Detection parameters:
  Position = (276.3, 275.0) = 5 16 44.87 45 59 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 675.2 +/- 61.0
  Background counts = 8.8
  Rate = 0.08 +/- 0.008

[Fri Mar 16 21:58:03 2012] Off-axis axis estimate = 2.34'
[Fri Mar 16 21:58:31 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 21:58:31 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Fri Mar 16 21:58:31 2012] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.694
[Fri Mar 16 21:58:31 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.60"
[Fri Mar 16 22:13:04 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Mar 16 22:13:04 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Mar 16 22:13:05 2012] Fit fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_src4 appears to have run properly
[Fri Mar 16 22:13:05 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Mar 16 22:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Mar 16 22:13:05 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Mar 16 22:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Mar 16 22:13:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 22:13:06 2012] Warning, spatial fit 4 centroid is now closest to src. 1
[Fri Mar 16 22:13:06 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 22:13:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 22:13:06 2012] Assessing source extent using major
[Fri Mar 16 22:13:06 2012] Source does appear to be extended
[Fri Mar 16 22:13:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 22:13:08 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 22:13:08 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Fri Mar 16 22:13:08 2012] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.694
[Fri Mar 16 22:13:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.60"
[Fri Mar 16 22:16:15 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 16 22:16:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 22:16:15 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 16 22:16:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 22:16:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 22:16:15 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 16 22:16:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Mar 16 22:16:15 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 16 22:16:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Mar 16 22:16:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510780101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 22:16:17 2012] Source 4 is offset by 6.715971 and 3.759784 pixels which is larger than
2 X fitted extent = 2.553600 x 2.553600, not incorporating fit results
[Fri Mar 16 22:16:17 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 22:16:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 22:16:17 2012] Assessing source extent using major
[Fri Mar 16 22:16:17 2012] Source does appear to be extended
[Fri Mar 16 22:16:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 22:16:18 2012] XMMSAS src. selection expression = ellipse(23987.655457, 23879.423187, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 22:16:18 2012] Writing source region out to fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src4_src.reg
[Fri Mar 16 22:16:18 2012] Extracting stamp from image fullrun_mos2_xmm0510780101_pi300-10000_cl_sm2.00.img.gz, (239, 238) - (314, 313)
[Fri Mar 16 22:16:18 2012] XMMSAS bgd. selection expression = annulus(23987.655457, 23879.423187, 1087.500000, 2175.000000, X, Y) && !ellipse(24571.068000, 24343.774000, 2468.064071, 1571.942445, 90.000000, X, Y)
[Fri Mar 16 22:16:18 2012] Writing fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src4.gif
[Fri Mar 16 22:25:31 2012] Mean detx,y = (-465.64, 221.50) 
[Fri Mar 16 22:25:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 22:25:42 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 22:25:43 2012] Setting source spectrum file to fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 22:25:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Mar 16 22:30:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 22:30:21 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:33:13 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:33:13 2012] Error reading totcts from fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 22:33:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:33:13 2012] Using photon index=1.80, rate=0.0848, arf fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src4.arf
[Fri Mar 16 22:33:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:33:13 2012] Updating source flux to 1.1e-12
[Fri Mar 16 22:33:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting