[Fri Mar 16 21:58:03 2012] Detection parameters:
  Position = (285.2, 279.1) = 5 16 41.15 45 59 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212989.9 +/- 547.9
  Background counts = 9.4
  Rate = 2e+01 +/- 0.06

[Fri Mar 16 21:58:03 2012] Off-axis axis estimate = 1.70'
[Fri Mar 16 21:58:31 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 21:58:31 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Mar 16 21:58:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.635
[Fri Mar 16 21:58:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Mar 16 22:13:04 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 16 22:13:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 22:13:04 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 16 22:13:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 22:13:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 22:13:05 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 16 22:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar 16 22:13:05 2012] fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 16 22:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar 16 22:13:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510780101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 22:13:06 2012] Spatial fit model total counts = 299213.000000, observed total counts = 193043.000000
[Fri Mar 16 22:13:06 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 16 22:13:06 2012] Spatial fit model total counts = 23856.600000, observed total counts = 22750.000000
[Fri Mar 16 22:13:06 2012] Offset between fit and detection position for source 1 = 2.544776 pixels
[Fri Mar 16 22:13:06 2012] Warning, changing simple spatial fit ID from 1 to 4
[Fri Mar 16 22:13:06 2012] 25626.900000 total counts/ 13639.000000 bgd. counts: snr = 102.648320
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.544776 pixels
  Position = (283.0, 280.4) = 5 16 42.07 45 59 56.0
  Extent = 10.3 (9.6-11.9)" x 6.5 (6.1-6.9)", rotation angle = 90 (89-90) degrees
  Source counts = 11987.9 +/- 160.1
  Background counts = 13639.0
  Rate = 1 +/- 0.02
[Fri Mar 16 22:13:06 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 22:13:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 22:13:06 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 22:13:06 2012] Source does appear to be extended
[Fri Mar 16 22:13:06 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.39
[Fri Mar 16 22:13:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 22:13:08 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Fri Mar 16 22:13:08 2012] source mask rpix=1.9, npix_max = 23, mask sum = 11, frac = 0.464
[Fri Mar 16 22:13:08 2012] Skipping simple spatial due to low active detector fraction
[Fri Mar 16 22:16:17 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 22:16:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 22:16:17 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 22:16:17 2012] Source does appear to be extended
[Fri Mar 16 22:16:17 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.39
[Fri Mar 16 22:16:18 2012] Counts = 11987.900000, rescaling region sizes by 3.000000
[Fri Mar 16 22:16:18 2012] XMMSAS src. selection expression = ellipse(24571.068000, 24343.774000, 1851.048053, 1178.956834, 90.000000, X, Y)
[Fri Mar 16 22:16:18 2012] Writing source region out to fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 16 22:16:18 2012] Extracting stamp from image fullrun_mos2_xmm0510780101_pi300-10000_cl_sm2.00.img.gz, (177, 174) - (389, 387)
[Fri Mar 16 22:16:18 2012] XMMSAS bgd. selection expression = annulus(24571.068000, 24343.774000, 9255.240266, 18510.480533, X, Y) && !ellipse(23987.655457, 23879.423187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15817.856842, 12808.759476, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 22:16:18 2012] Writing fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src1.gif
[Fri Mar 16 22:16:30 2012] Mean detx,y = (13.92, -9.28) 
[Fri Mar 16 22:16:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 22:25:27 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 22:25:27 2012] Setting source spectrum file to fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 22:25:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 22:33:13 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:33:13 2012] Error reading totcts from fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 22:33:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:33:13 2012] Using photon index=1.80, rate=1.16, arf fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 22:33:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:33:13 2012] Updating source flux to 1.6e-11
[Fri Mar 16 22:33:13 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri Mar 16 22:33:50 2012] Reading fit data from xmm0510780101/analysis//spectral/fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Mar 16 22:33:50 2012] Spectral fit parameter nH value = 9.02156e+21
[Fri Mar 16 22:33:50 2012] Spectral fit parameter PhoIndex value = 7.94891
[Fri Mar 16 22:33:50 2012] Failed to get F(0.3-8.0) from xmm0510780101/analysis//spectral/fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Mar 16 22:33:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:33:50 2012] Using Nh = 9e+21, photon index=7.95, rate=1.16, arf fullrun_mos2_xmm0510780101_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 22:33:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:33:50 2012] Updating source flux to 9.3e-12