[Tue May 22 10:27:33 2012] Detection parameters:
  Position = (299.5, 321.1) = 11 4 27.40 38 12 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 568767.4 +/- 872.0
  Background counts = 45.8
  Rate = 3e+01 +/- 0.05

[Tue May 22 10:27:33 2012] Off-axis axis estimate = 1.65'
[Tue May 22 10:54:10 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue May 22 10:54:10 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue May 22 10:54:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Tue May 22 10:54:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue May 22 14:01:49 2012] fullrun_mos2_xmm0510610101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 22 14:01:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510610101_pi300-10000_cl_pass0_src1.csv
[Tue May 22 14:01:49 2012] fullrun_mos2_xmm0510610101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 22 14:01:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510610101_pi300-10000_cl_pass0_src1.csv
[Tue May 22 14:01:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510610101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510610101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 14:01:49 2012] fullrun_mos2_xmm0510610101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 22 14:01:49 2012] fullrun_mos2_xmm0510610101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 22 14:01:49 2012] Fit fullrun_mos2_xmm0510610101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 22 14:01:56 2012] Spatial fit model total counts = 455138.000000, observed total counts = 466956.000000
[Tue May 22 14:01:56 2012] Offset between fit and detection position for source 1 = 0.188591 pixels
[Tue May 22 14:01:56 2012] 440463.000000 total counts/ 25600.000000 bgd. counts: snr = 2592.893750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.188591 pixels
  Position = (299.4, 321.3) = 11 4 27.44 38 12 30.8
  Extent = 8.4 (8.4-8.4)", rotation angle = 0
  Source counts = 414863.0 +/- 663.7
  Background counts = 25600.0
  Rate = 3e+01 +/- 0.05
[Tue May 22 14:01:56 2012] Vigneting correction estimate = 1.000000
[Tue May 22 14:01:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 14:01:56 2012] Assessing source extent using major axis lower bound
[Tue May 22 14:01:56 2012] Source does appear to be extended
[Tue May 22 14:01:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 14:15:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 14:15:38 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Tue May 22 14:15:38 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.065
[Tue May 22 14:15:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.36"
[Tue May 22 15:19:22 2012] fullrun_mos2_xmm0510610101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 22 15:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510610101_pi300-10000_cl_pass1_src1.csv
[Tue May 22 15:19:22 2012] fullrun_mos2_xmm0510610101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 22 15:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510610101_pi300-10000_cl_pass1_src1.csv
[Tue May 22 15:19:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510610101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510610101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 15:19:22 2012] fullrun_mos2_xmm0510610101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 22 15:19:22 2012] fullrun_mos2_xmm0510610101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 22 15:19:22 2012] Fit fullrun_mos2_xmm0510610101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 22 15:19:26 2012] Spatial fit model total counts = 453453.000000, observed total counts = 466956.000000
[Tue May 22 15:19:26 2012] Offset between fit and detection position for source 1 = 0.032036 pixels
[Tue May 22 15:19:26 2012] 441463.000000 total counts/ 25600.000000 bgd. counts: snr = 2599.143750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.032036 pixels
  Position = (299.3, 321.3) = 11 4 27.45 38 12 30.8
  Extent = 8.4 (8.4-8.4)", rotation angle = 0
  Source counts = 415863.0 +/- 664.4
  Background counts = 25600.0
  Rate = 3e+01 +/- 0.05
[Tue May 22 15:19:26 2012] Vigneting correction estimate = 1.000000
[Tue May 22 15:19:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 15:19:26 2012] Assessing source extent using major axis lower bound
[Tue May 22 15:19:26 2012] Source does appear to be extended
[Tue May 22 15:19:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 15:35:04 2012] Counts = 415863.000000, rescaling region sizes by 3.000000
[Tue May 22 15:35:04 2012] XMMSAS src. selection expression = ellipse(25993.976600, 27903.158600, 1509.582643, 1509.582643, 0.000000, X, Y)
[Tue May 22 15:35:04 2012] Writing source region out to fullrun_mos2_xmm0510610101_pi300-10000_pass1_cl_src1_src.reg
[Tue May 22 15:35:04 2012] Extracting stamp from image fullrun_mos2_xmm0510610101_pi300-10000_cl_sm2.00.img.gz, (213, 235) - (386, 408)
[Tue May 22 15:35:04 2012] XMMSAS bgd. selection expression = annulus(25993.976600, 27903.158600, 7547.913217, 15095.826434, X, Y) && !ellipse(26919.219330, 28239.538849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.107666, 28896.024048, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 22 15:35:04 2012] Writing fullrun_mos2_xmm0510610101_pi300-10000_pass1_cl_src1.gif
[Tue May 22 15:35:59 2012] Mean detx,y = (49.46, -11.21) 
[Tue May 22 15:36:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 15:41:58 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 15:41:58 2012] Setting source spectrum file to fullrun_mos2_xmm0510610101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 22 15:41:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0510610101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 22 16:58:13 2012] Updating aperture counts using extracted products
[Tue May 22 16:58:13 2012] Error reading totcts from fullrun_mos2_xmm0510610101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 22 16:58:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 16:58:14 2012] Using photon index=1.80, rate=29.1, arf fullrun_mos2_xmm0510610101_pi300-10000_pass1_cl_src1.arf
[Tue May 22 16:58:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 16:58:14 2012] Updating source flux to 2.9e-10
[Tue May 22 16:59:13 2012] Reading fit data from xmm0510610101/analysis//spectral/fullrun_mos2_xmm0510610101_pi300-10000_pass1_cl_src1_pl.csv
[Tue May 22 16:59:13 2012] Spectral fit parameter nH value = 3.85894e+20
[Tue May 22 16:59:13 2012] Spectral fit parameter PhoIndex value = 2.619
[Tue May 22 16:59:13 2012] Failed to get F(0.3-8.0) from xmm0510610101/analysis//spectral/fullrun_mos2_xmm0510610101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue May 22 16:59:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 16:59:13 2012] Using Nh = 3.9e+20, photon index=2.62, rate=29.1, arf fullrun_mos2_xmm0510610101_pi300-10000_pass1_cl_src1.arf
[Tue May 22 16:59:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 16:59:13 2012] Updating source flux to 2.3e-10