[Thu Jun 20 01:23:52 2013] Detection parameters:
  Position = (351.7, 504.9) = 8 35 0.84 -44 57 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 789.7 +/- 37.3
  Background counts = 88.5
  Rate = 0.007 +/- 0.0003

[Thu Jun 20 01:23:52 2013] Off-axis axis estimate = 15.46'
[Thu Jun 20 02:25:28 2013] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 02:25:28 2013] Initial guess for spatial extent in simple fitting = 14.16"
[Thu Jun 20 02:25:28 2013] source mask rpix=3.3, npix_max = 56, mask sum = 47, frac = 0.834
[Thu Jun 20 02:25:28 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 14.16"
[Thu Jun 20 10:31:12 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun 20 10:31:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src9.csv
[Thu Jun 20 10:31:12 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun 20 10:31:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src9.csv
[Thu Jun 20 10:31:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 10:31:15 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun 20 10:31:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 20 10:31:15 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun 20 10:31:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 20 10:31:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 10:31:50 2013] Warning, spatial fit 9 centroid is now closest to src. 5
[Thu Jun 20 10:31:50 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 10:31:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 10:31:50 2013] Assessing source extent using major
[Thu Jun 20 10:31:50 2013] Source does appear to be extended
[Thu Jun 20 10:31:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 10:31:50 2013] Source is confused with source 4
[Thu Jun 20 11:39:27 2013] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 11:39:27 2013] Initial guess for spatial extent in simple fitting = 14.16"
[Thu Jun 20 11:39:27 2013] source mask rpix=3.3, npix_max = 56, mask sum = 47, frac = 0.834
[Thu Jun 20 11:39:27 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 14.16"
[Thu Jun 20 18:42:35 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jun 20 18:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_src9.csv
[Thu Jun 20 18:42:35 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jun 20 18:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_src9.csv
[Thu Jun 20 18:42:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:42:37 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jun 20 18:42:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu Jun 20 18:42:37 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jun 20 18:42:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu Jun 20 18:42:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:43:03 2013] Source 81 is offset by -5.218605 and -0.677325 pixels which is larger than
2 X fitted extent = 1.609526 x 1.609526, not incorporating fit results
[Thu Jun 20 18:43:03 2013] Warning, spatial fit 9 centroid is now closest to src. 4
[Thu Jun 20 18:43:03 2013] Spatial fit model total counts = -72.241600, observed total counts = 3525.000000
[Thu Jun 20 18:43:03 2013] Poor agreement between spatial fit and data for source 81
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 18:43:03 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:43:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:43:03 2013] Assessing source extent using major
[Thu Jun 20 18:43:03 2013] Source does appear to be extended
[Thu Jun 20 18:43:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 20:26:52 2013] XMMSAS src. selection expression = ellipse(30545.081329, 43877.050751, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 20:26:52 2013] Writing source region out to fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src81_src.reg
[Thu Jun 20 20:26:52 2013] Extracting stamp from image fullrun_mos1_xmm0510390701_pi300-10000_cl_sm2.00.img.gz, (314, 467) - (389, 542)
[Thu Jun 20 20:26:52 2013] XMMSAS bgd. selection expression = annulus(30545.081329, 43877.050751, 1087.500000, 2175.000000, X, Y) && !ellipse(27895.866547, 42568.320435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28746.864502, 43009.286285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29985.502045, 43596.647797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29451.190674, 43316.619202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27713.471344, 41820.188934, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 20:26:52 2013] Writing fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src81.gif
[Thu Jun 20 20:50:21 2013] Mean detx,y = (12733.09, 10498.47) 
[Thu Jun 20 20:50:22 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 20 20:50:39 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 20 20:50:39 2013] Setting source spectrum file to fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Thu Jun 20 20:50:39 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Thu Jun 20 21:28:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 21:28:23 2013] rmf not generated due to insufficient counts
[Thu Jun 20 21:30:50 2013] Updating aperture counts using extracted products
[Thu Jun 20 21:30:50 2013] Total counts from fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src81_src_b10.pi.gz = 2258.00
[Thu Jun 20 21:30:50 2013] Total counts from fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src81_bgd.pi.gz = 2470.00
[Thu Jun 20 21:30:50 2013] Got source and background scale factors 866878.000000, 3379036.000000
[Thu Jun 20 21:30:50 2013] User source parameters:
  Position = (351.7, 504.9) = 8 35 0.84 -44 57 11.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1624.3 +/- 48.5
  Background aperture counts = 633.7
  Rate = 0.01 +/- 0.0004

[Thu Jun 20 21:30:50 2013] Updating counts from extracted products
[Thu Jun 20 21:30:50 2013] Set source signif. to 1624.33/25.17 = 64.53
[Thu Jun 20 21:30:56 2013] No arf file for this source, not re-computing flux
[Thu Jun 20 21:30:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 21:30:58 2013] xmm0510390701/analysis//spectral/fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src81_pl.csv not found, spectral fit skipped or did not complete