[Thu Jun 20 01:23:52 2013] Detection parameters:
  Position = (294.9, 277.2) = 8 35 24.10 -45 13 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.1 +/- 22.6
  Background counts = 64.3
  Rate = 0.002 +/- 0.0002

[Thu Jun 20 01:23:52 2013] Off-axis axis estimate = 1.56'
[Thu Jun 20 02:25:28 2013] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 02:25:28 2013] Initial guess for spatial extent in simple fitting = 7.21"
[Thu Jun 20 02:25:28 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.860
[Thu Jun 20 02:25:28 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 7.21"
[Thu Jun 20 10:31:12 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src31.ximg exists
[Thu Jun 20 10:31:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src31.csv
[Thu Jun 20 10:31:12 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Jun 20 10:31:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src31.csv
[Thu Jun 20 10:31:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 10:31:16 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Jun 20 10:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Jun 20 10:31:16 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Jun 20 10:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Jun 20 10:31:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390701_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 10:31:50 2013] Warning, spatial fit 31 centroid is now closest to src. 80
[Thu Jun 20 10:31:50 2013] Spatial fit model total counts = 1218.330000, observed total counts = 1221.000000
[Thu Jun 20 10:31:50 2013] Offset between fit and detection position for source 79 = 4.186119 pixels
[Thu Jun 20 10:31:50 2013] Warning, changing simple spatial fit ID from 31 to 59
[Thu Jun 20 10:31:50 2013] 1239.827000 total counts/ 958.265000 bgd. counts: snr = 9.095597
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 4.186119 pixels
  Position = (291.0, 278.8) = 8 35 25.71 -45 13 37.7
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source counts = 281.6 +/- 35.2
  Background counts = 958.3
  Rate = 0.003 +/- 0.0003
[Thu Jun 20 10:31:50 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 10:31:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 10:31:50 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 10:31:50 2013] Source does appear to be extended
[Thu Jun 20 10:31:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 10:31:50 2013] Source is confused with source 80
[Thu Jun 20 11:39:27 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 11:39:27 2013] Initial guess for spatial extent in simple fitting = 14.83"
[Thu Jun 20 11:39:27 2013] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.047
[Thu Jun 20 11:39:27 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 14.83"
[Thu Jun 20 18:42:35 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jun 20 18:42:35 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jun 20 18:42:35 2013] Fit fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_src27 appears to have run properly
[Thu Jun 20 18:42:37 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jun 20 18:42:37 2013] fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jun 20 18:42:37 2013] Fit fullrun_mos1_xmm0510390701_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Jun 20 18:43:03 2013] Spatial fit model total counts = 6188.770000, observed total counts = 6193.000000
[Thu Jun 20 18:43:03 2013] Offset between fit and detection position for source 79 = 6.700779 pixels
[Thu Jun 20 18:43:03 2013] Warning, changing simple spatial fit ID from 27 to 13
[Thu Jun 20 18:43:03 2013] 6498.960000 total counts/ 5131.100000 bgd. counts: snr = 19.095736
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 6.700779 pixels
  Position = (290.0, 285.4) = 8 35 26.12 -45 13 8.9
  Extent = 27.5 (27.4-55.0)", rotation angle = 0
  Source counts = 1367.9 +/- 80.6
  Background counts = 5131.1
  Rate = 0.01 +/- 0.0007
[Thu Jun 20 18:43:03 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:43:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:43:03 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 18:43:03 2013] Source does appear to be extended
[Thu Jun 20 18:43:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 20:26:53 2013] Counts = 1367.860000, rescaling region sizes by 2.000000
[Thu Jun 20 20:26:53 2013] XMMSAS src. selection expression = ellipse(25182.818000, 24779.360000, 3298.368095, 3298.368095, 0.000000, X, Y)
[Thu Jun 20 20:26:53 2013] Writing source region out to fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src79_src.reg
[Thu Jun 20 20:26:53 2013] Extracting stamp from image fullrun_mos1_xmm0510390701_pi300-10000_cl_sm2.00.img.gz, (100, 96) - (480, 475)
[Thu Jun 20 20:26:53 2013] XMMSAS bgd. selection expression = annulus(25182.818000, 24779.360000, 10994.560316, 21989.120633, X, Y) && !ellipse(26341.362600, 27929.285800, 4002.072115, 3058.440088, 46.856600, X, Y) && !ellipse(26309.062600, 27965.262000, 3268.704094, 1990.096857, 42.980700, X, Y) && !ellipse(36217.970000, 41230.830000, 2229.520064, 278.690408, 65.337500, X, Y) && !ellipse(27895.866547, 42568.320435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26273.015600, 25856.682000, 1058.416030, 1058.416030, 0.000000, X, Y) && !ellipse(28746.864502, 43009.286285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29985.502045, 43596.647797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27895.399261, 25875.176849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30545.081329, 43877.050751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27271.966522, 42303.502502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29451.190674, 43316.619202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28281.821000, 25364.342200, 1180.312034, 1180.312034, 0.000000, X, Y) && !ellipse(25905.226000, 25570.046000, 1099.456032, 1099.456032, 0.000000, X, Y) && !ellipse(28483.190887, 26663.540009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28731.459000, 25410.154000, 1231.824035, 541.231216, 335.610700, X, Y) && !ellipse(25782.014000, 25210.288000, 2116.832061, 1582.240046, 148.964000, X, Y) && !ellipse(29185.154083, 26400.251373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35962.116364, 26661.227478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24303.500600, 26187.582000, 2240.400064, 1244.720036, 55.496800, X, Y) && !ellipse(28945.219086, 29063.410370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29496.464233, 27326.944214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24020.700000, 26485.092000, 1146.664033, 1146.664033, 0.000000, X, Y) && !ellipse(29912.773000, 25971.703600, 1303.904038, 540.649616, 153.433000, X, Y) && !ellipse(36621.710602, 40403.096252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.312347, 29802.793549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35439.962372, 26856.242035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25241.798370, 29481.989014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39253.553528, 34660.918365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37234.309600, 39093.315200, 1865.400054, 273.156008, 64.992000, X, Y) && !ellipse(35733.197000, 24659.918000, 1671.416048, 1671.416048, 0.000000, X, Y) && !ellipse(24686.427307, 25361.322479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34593.257599, 26619.822296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36828.776337, 39972.933716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27713.471344, 41820.188934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34788.625275, 27074.989899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27348.487122, 30469.126251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24427.673462, 29131.872955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29988.082733, 27180.320221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29673.350000, 28400.452200, 1296.592037, 1296.592037, 0.000000, X, Y) && !ellipse(27834.091980, 30119.711121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25922.470000, 30658.162000, 1375.896040, 1375.896040, 0.000000, X, Y) && !ellipse(28739.547000, 30130.446000, 1687.024049, 633.532818, 64.936300, X, Y) && !ellipse(24444.494000, 23196.384000, 1186.352034, 1186.352034, 0.000000, X, Y) && !ellipse(34555.491000, 30033.015800, 1659.560048, 442.315213, 73.085600, X, Y) && !ellipse(27580.580000, 31160.064000, 1346.824039, 1346.824039, 0.000000, X, Y) && !ellipse(27372.016000, 31675.942200, 1413.376041, 1413.376041, 0.000000, X, Y) && !ellipse(27265.618000, 31063.193800, 1388.472040, 1388.472040, 0.000000, X, Y)
[Thu Jun 20 20:26:53 2013] Writing fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src79.gif
[Thu Jun 20 21:08:59 2013] Mean detx,y = (-685.67, -806.33) 
[Thu Jun 20 21:09:03 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 20 21:18:17 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 20 21:18:17 2013] Setting source spectrum file to fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Thu Jun 20 21:18:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Thu Jun 20 21:30:53 2013] Updating aperture counts using extracted products
[Thu Jun 20 21:30:53 2013] Total counts from fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src79_src_b10.pi.gz = 94119.00
[Thu Jun 20 21:30:53 2013] Total counts from fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src79_bgd.pi.gz = 163131.00
[Thu Jun 20 21:30:53 2013] Got source and background scale factors 33826270.000000, 283619258.000000
[Thu Jun 20 21:30:53 2013] User source parameters:
  Position = (290.0, 285.4) = 8 35 26.12 -45 13 8.9
  Extent = 27.5 (27.4-55.0)", rotation angle = 0
  Source aperture counts = 74662.9 +/- 307.8
  Background aperture counts = 19456.1
  Rate = 0.7 +/- 0.003

[Thu Jun 20 21:30:56 2013] No arf file for this source, not re-computing flux
[Thu Jun 20 21:30:57 2013] Flag c found in src. 79 procflags, skipping spectral fitting
[Thu Jun 20 21:30:57 2013] Source 79 has no response, skipping
[Thu Jun 20 21:30:58 2013] xmm0510390701/analysis//spectral/fullrun_mos1_xmm0510390701_pi300-10000_pass1_cl_src79_pl.csv not found, spectral fit skipped or did not complete