[Tue Jul 24 02:22:02 2012] Detection parameters:
  Position = (294.5, 333.5) = 8 35 24.32 -45 9 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1884.9 +/- 77.3
  Background counts = 418.6
  Rate = 0.1 +/- 0.005

[Tue Jul 24 02:22:02 2012] Off-axis axis estimate = 2.56'
[Tue Jul 24 02:25:28 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 02:25:28 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Jul 24 02:25:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.017
[Tue Jul 24 02:25:28 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.71"
[Tue Jul 24 03:18:42 2012] fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jul 24 03:18:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_src3.csv
[Tue Jul 24 03:18:42 2012] fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jul 24 03:18:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_src3.csv
[Tue Jul 24 03:18:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 03:18:43 2012] fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jul 24 03:18:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul 24 03:18:43 2012] fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jul 24 03:18:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul 24 03:18:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510390601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 03:23:02 2012] Source 3 is offset by -4.859862 and 6.551806 pixels which is larger than
2 X fitted extent = 4.356138 x 4.356138, not incorporating fit results
[Tue Jul 24 03:23:02 2012] Spatial fit model total counts = 9323.990000, observed total counts = 8593.000000
[Tue Jul 24 03:23:02 2012] Offset between fit and detection position for source 3 = 4.640067 pixels
[Tue Jul 24 03:23:02 2012] Warning, changing simple spatial fit ID from 3 to 6
[Tue Jul 24 03:23:02 2012] 9721.583000 total counts/ 9376.420000 bgd. counts: snr = 3.564558
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.640067 pixels
  Position = (298.7, 335.5) = 8 35 22.60 -45 9 30.6
  Extent = 15.9" x 15.9", rotation angle = 348
  Source counts = 345.2 +/- 98.6
  Background counts = 9376.4
  Rate = 0.02 +/- 0.005
[Tue Jul 24 03:23:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 03:23:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 03:23:02 2012] Assessing source extent using major
[Tue Jul 24 03:23:02 2012] Source does appear to be extended
[Tue Jul 24 03:23:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 03:23:02 2012] Source is confused with source 6
[Tue Jul 24 03:23:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 03:23:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 24 03:23:07 2012] Initial guess for spatial extent in simple fitting = 15.89"
[Tue Jul 24 03:23:07 2012] source mask rpix=3.7, npix_max = 69, mask sum = 30, frac = 0.435
[Tue Jul 24 03:23:07 2012] Skipping simple spatial due to low active detector fraction
[Tue Jul 24 05:00:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 05:00:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 05:00:11 2012] Assessing source extent using major
[Tue Jul 24 05:00:11 2012] Source does appear to be extended
[Tue Jul 24 05:00:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 05:00:16 2012] XMMSAS src. selection expression = ellipse(25938.106000, 29139.358000, 953.670027, 953.670027, 348.444000, X, Y)
[Tue Jul 24 05:00:16 2012] Writing source region out to fullrun_pn_xmm0510390601_pi300-10000_pass1_cl_src3_src.reg
[Tue Jul 24 05:00:16 2012] Extracting stamp from image fullrun_pn_xmm0510390601_pi300-10000_cl_sm2.00.img.gz, (244, 281) - (354, 390)
[Tue Jul 24 05:00:16 2012] XMMSAS bgd. selection expression = annulus(25938.106000, 29139.358000, 1589.450046, 3178.900091, X, Y) && !ellipse(26334.873600, 27849.963800, 3822.072110, 3822.072110, 0.000000, X, Y) && !ellipse(27816.014000, 25221.734000, 1135.048033, 1135.048033, 0.000000, X, Y) && !ellipse(25454.049377, 25077.072388, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(29533.985107, 26231.951721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29530.663666, 25879.281525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27369.690186, 29809.553253, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 24 05:00:16 2012] Writing fullrun_pn_xmm0510390601_pi300-10000_pass1_cl_src3.gif
[Tue Jul 24 05:08:25 2012] Mean detx,y = (218.07, -880.23) 
[Tue Jul 24 05:08:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 05:08:44 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 05:08:44 2012] Setting source spectrum file to fullrun_pn_xmm0510390601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jul 24 05:08:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0510390601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jul 24 10:18:01 2012] Updating aperture counts using extracted products
[Tue Jul 24 10:18:01 2012] Error reading totcts from fullrun_pn_xmm0510390601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jul 24 10:18:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 10:18:02 2012] Using photon index=1.80, rate=0.019, arf fullrun_pn_xmm0510390601_pi300-10000_pass1_cl_src3.arf
[Tue Jul 24 10:18:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 10:18:02 2012] Updating source flux to 5.7e-14
[Tue Jul 24 10:18:04 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Tue Jul 24 10:18:04 2012] Flag c found in src. 3 procflags, skipping spectral fitting