[Mon Feb 13 10:23:59 2012] Detection parameters:
  Position = (303.1, 321.1) = 8 35 20.70 -45 10 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144973.5 +/- 447.1
  Background counts = 202.4
  Rate = 2e+01 +/- 0.05

[Mon Feb 13 10:23:59 2012] Off-axis axis estimate = 1.68'
[Mon Feb 13 10:26:44 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 10:26:44 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Mon Feb 13 10:26:44 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Mon Feb 13 10:26:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Mon Feb 13 11:23:40 2012] fullrun_pn_xmm0510390501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 13 11:23:40 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0510390501_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 11:23:40 2012] fullrun_pn_xmm0510390501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 13 11:23:40 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0510390501_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 11:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510390501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510390501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 11:23:40 2012] fullrun_pn_xmm0510390501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 13 11:23:40 2012] fullrun_pn_xmm0510390501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 13 11:23:40 2012] Fit fullrun_pn_xmm0510390501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 13 11:45:57 2012] Spatial fit model total counts = 225118.000000, observed total counts = 228152.000000
[Mon Feb 13 11:45:57 2012] Offset between fit and detection position for source 1 = 0.522355 pixels
[Mon Feb 13 11:45:57 2012] 224928.000000 total counts/ 25600.000000 bgd. counts: snr = 1245.800000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.522355 pixels
  Position = (303.4, 321.6) = 8 35 20.60 -45 10 30.9
  Extent = 14.0 (13.9-14.0)", rotation angle = 0
  Source counts = 199328.0 +/- 474.3
  Background counts = 25600.0
  Rate = 2e+01 +/- 0.05
[Mon Feb 13 11:45:57 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 11:45:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 11:45:57 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 11:45:57 2012] Source does appear to be extended
[Mon Feb 13 11:45:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 11:46:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 13 11:46:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 13 11:46:03 2012] Initial guess for spatial extent in simple fitting = 13.98"
[Mon Feb 13 11:46:03 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.889
[Mon Feb 13 11:46:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.98"
[Mon Feb 13 13:18:49 2012] fullrun_pn_xmm0510390501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 13 13:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390501_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 13:18:49 2012] fullrun_pn_xmm0510390501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 13 13:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390501_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 13:18:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510390501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510390501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 13:18:49 2012] fullrun_pn_xmm0510390501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 13 13:18:49 2012] fullrun_pn_xmm0510390501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 13 13:18:49 2012] Fit fullrun_pn_xmm0510390501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 13 13:39:26 2012] Spatial fit model total counts = 272562.000000, observed total counts = 272604.000000
[Mon Feb 13 13:39:26 2012] Offset between fit and detection position for source 1 = 0.178884 pixels
[Mon Feb 13 13:39:26 2012] 271647.900000 total counts/ 53947.900000 bgd. counts: snr = 937.283900
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.178884 pixels
  Position = (303.2, 321.7) = 8 35 20.66 -45 10 30.5
  Extent = 14.9 (14.9-15.0)", rotation angle = 0
  Source counts = 217700.0 +/- 521.2
  Background counts = 53947.9
  Rate = 2e+01 +/- 0.05
[Mon Feb 13 13:39:26 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 13:39:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 13:39:26 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 13:39:26 2012] Source does appear to be extended
[Mon Feb 13 13:39:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 13:39:33 2012] Counts = 217700.000000, rescaling region sizes by 3.000000
[Mon Feb 13 13:39:33 2012] XMMSAS src. selection expression = ellipse(26333.997200, 27940.466000, 2688.768077, 2688.768077, 0.000000, X, Y)
[Mon Feb 13 13:39:33 2012] Writing source region out to fullrun_pn_xmm0510390501_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 13 13:39:33 2012] Extracting stamp from image fullrun_pn_xmm0510390501_pi300-10000_cl_sm2.00.img.gz, (149, 167) - (458, 476)
[Mon Feb 13 13:39:33 2012] XMMSAS bgd. selection expression = annulus(26333.997200, 27940.466000, 13443.840387, 26887.680774, X, Y) && !ellipse(25851.022000, 29071.108000, 587.868017, 587.868017, 0.000000, X, Y) && !ellipse(27638.356000, 28833.754000, 1277.368037, 1277.368037, 0.000000, X, Y) && !ellipse(35907.231598, 26631.748688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28977.379456, 25535.821625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.202000, 29740.724000, 1310.592038, 1310.592038, 0.000000, X, Y) && !ellipse(32117.550991, 25007.894175, 1448.392042, 953.526553, 63.580013, X, Y) && !ellipse(27335.716431, 24235.093567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27122.380000, 30067.474000, 2289.640066, 2289.640066, 0.000000, X, Y) && !ellipse(25298.902000, 32024.144000, 1310.592038, 595.586417, 47.958000, X, Y) && !ellipse(27299.990000, 31069.027000, 1370.440039, 1370.440039, 0.000000, X, Y) && !ellipse(27772.058760, 30107.038000, 1351.920039, 1351.920039, 0.000000, X, Y)
[Mon Feb 13 13:39:33 2012] Writing fullrun_pn_xmm0510390501_pi300-10000_pass1_cl_src1.gif
[Mon Feb 13 13:40:02 2012] Mean detx,y = (216.88, -45.32) 
[Mon Feb 13 13:40:07 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 13:46:55 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 13:46:56 2012] Setting source spectrum file to fullrun_pn_xmm0510390501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 13:46:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0510390501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Feb 14 16:04:25 2012] Updating aperture counts using extracted products
[Tue Feb 14 16:04:25 2012] Error reading totcts from fullrun_pn_xmm0510390501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 16:04:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 16:04:25 2012] Using photon index=1.80, rate=21.8, arf fullrun_pn_xmm0510390501_pi300-10000_pass1_cl_src1.arf
[Tue Feb 14 16:04:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 16:04:25 2012] Updating source flux to 4.9e-11
[Tue Feb 14 16:05:44 2012] Reading fit data from xmm0510390501/analysis//spectral/fullrun_pn_xmm0510390501_pi300-10000_pass1_cl_src1_pl.csv
[Tue Feb 14 16:05:44 2012] Spectral fit parameter nH value = 2.28055e+12
[Tue Feb 14 16:05:44 2012] Spectral fit parameter PhoIndex value = 1.86596
[Tue Feb 14 16:05:44 2012] Failed to get F(0.3-8.0) from xmm0510390501/analysis//spectral/fullrun_pn_xmm0510390501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Feb 14 16:05:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 16:05:44 2012] Using Nh = 2.3e+12, photon index=1.87, rate=21.8, arf fullrun_pn_xmm0510390501_pi300-10000_pass1_cl_src1.arf
[Tue Feb 14 16:05:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 16:05:44 2012] Updating source flux to 4.7e-11