[Mon Jun  4 11:41:02 2012] Detection parameters:
  Position = (292.3, 256.3) = 8 35 21.31 -45 12 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1841.3 +/- 61.8
  Background counts = 308.6
  Rate = 0.1 +/- 0.005

[Mon Jun  4 11:41:03 2012] Off-axis axis estimate = 3.08'
[Mon Jun  4 11:48:40 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 11:48:40 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Mon Jun  4 11:48:40 2012] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.103
[Mon Jun  4 11:48:40 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.97"
[Mon Jun  4 20:20:43 2012] fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun  4 20:20:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_src3.csv
[Mon Jun  4 20:20:43 2012] fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun  4 20:20:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_src3.csv
[Mon Jun  4 20:20:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 20:20:44 2012] fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun  4 20:20:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  4 20:20:44 2012] fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun  4 20:20:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  4 20:20:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 07:03:16 2012] Spatial fit model total counts = 17967.200000, observed total counts = 12107.000000
[Tue Jun  5 07:03:16 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  5 07:03:16 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 07:03:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 07:03:16 2012] Assessing source extent using major
[Tue Jun  5 07:03:16 2012] Source does appear to be extended
[Tue Jun  5 07:03:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 07:03:59 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 07:03:59 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Tue Jun  5 07:03:59 2012] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.103
[Tue Jun  5 07:03:59 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.97"
[Tue Jun  5 08:35:03 2012] fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun  5 08:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_src3.csv
[Tue Jun  5 08:35:03 2012] fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun  5 08:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_src3.csv
[Tue Jun  5 08:35:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 08:35:03 2012] fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun  5 08:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun  5 08:35:03 2012] fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun  5 08:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun  5 08:35:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:32:31 2012] Source 5 is offset by 3.839237 and 5.777692 pixels which is larger than
2 X fitted extent = 6.441655 x 4.108179, not incorporating fit results
[Tue Jun  5 17:32:31 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:32:31 2012] Assessing source extent using major
[Tue Jun  5 17:32:31 2012] Source does appear to be extended
[Tue Jun  5 17:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 17:33:17 2012] Counts = 1841.291504, rescaling region sizes by 2.000000
[Tue Jun  5 17:33:17 2012] XMMSAS src. selection expression = ellipse(25379.323578, 22252.737183, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun  5 17:33:17 2012] Writing source region out to fullrun_pn_xmm0510390301_pi300-10000_pass1_cl_src5_src.reg
[Tue Jun  5 17:33:17 2012] Extracting stamp from image fullrun_pn_xmm0510390301_pi300-10000_cl_sm2.00.img.gz, (217, 181) - (367, 331)
[Tue Jun  5 17:33:17 2012] XMMSAS bgd. selection expression = annulus(25379.323578, 22252.737183, 4350.000000, 8700.000000, X, Y) && !ellipse(26323.337830, 22807.914429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25588.266780, 24042.108600, 3624.768104, 3624.768104, 0.000000, X, Y) && !ellipse(23484.280487, 20938.642380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27400.002655, 19109.231613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26872.979340, 24916.010345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28921.923859, 21169.283447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28311.970703, 20322.168472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29308.031494, 20305.893143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27811.808319, 19804.004990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.612122, 24665.346375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23030.974060, 23786.685669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28477.428000, 19355.708000, 1466.120042, 1466.120042, 0.000000, X, Y) && !ellipse(22416.674622, 13463.403412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20049.212000, 11542.418200, 2087.896060, 2087.896060, 0.000000, X, Y)
[Tue Jun  5 17:33:17 2012] Writing fullrun_pn_xmm0510390301_pi300-10000_pass1_cl_src5.gif
[Tue Jun  5 17:53:43 2012] Mean detx,y = (674.24, -1154.97) 
[Tue Jun  5 17:53:53 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 17:57:24 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 17:57:25 2012] Setting source spectrum file to fullrun_pn_xmm0510390301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jun  5 17:57:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0510390301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jun  6 05:58:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun  6 05:58:03 2012] rmf not generated due to insufficient counts
[Wed Jun  6 07:26:20 2012] Updating aperture counts using extracted products
[Wed Jun  6 07:26:20 2012] Error reading totcts from fullrun_pn_xmm0510390301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jun  6 07:26:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 07:26:21 2012] Using photon index=1.80, rate=0.137, arf fullrun_pn_xmm0510390301_pi300-10000_pass1_cl_src5.arf
[Wed Jun  6 07:26:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 07:26:21 2012] Updating source flux to 3.6e-13
[Wed Jun  6 07:26:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting