[Mon Jun  4 11:42:17 2012] Detection parameters:
  Position = (221.5, 289.1) = 8 35 50.41 -45 9 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.2 +/- 19.7
  Background counts = 115.1
  Rate = 0.001 +/- 0.0003

[Mon Jun  4 11:42:17 2012] Off-axis axis estimate = 5.62'
[Mon Jun  4 20:20:45 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 20:20:45 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Mon Jun  4 20:20:45 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.090
[Mon Jun  4 20:20:45 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 9.24"
[Tue Jun  5 07:02:55 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src24.ximg exists
[Tue Jun  5 07:02:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src24.csv
[Tue Jun  5 07:02:55 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue Jun  5 07:02:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src24.csv
[Tue Jun  5 07:02:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 07:02:58 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue Jun  5 07:02:58 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue Jun  5 07:02:58 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Tue Jun  5 07:03:43 2012] Spatial fit model total counts = 1641.480000, observed total counts = 1640.000000
[Tue Jun  5 07:03:43 2012] Offset between fit and detection position for source 91 = 1.207199 pixels
[Tue Jun  5 07:03:43 2012] 1633.360000 total counts/ 1552.340000 bgd. counts: snr = 2.056358
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 1.207199 pixels
  Position = (220.3, 289.1) = 8 35 50.90 -45 9 38.0
  Extent = 9.2 (2.3-18.5)", rotation angle = 0
  Source counts = 81.0 +/- 40.4
  Background counts = 1552.3
  Rate = 0.0009 +/- 0.0004
[Tue Jun  5 07:03:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 07:03:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 07:03:44 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 07:03:44 2012] Source does appear to be extended
[Tue Jun  5 07:03:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 08:35:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun  5 08:35:04 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Tue Jun  5 08:35:04 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.102
[Tue Jun  5 08:35:04 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 9.17"
[Tue Jun  5 17:32:19 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src21.ximg exists
[Tue Jun  5 17:32:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src21.csv
[Tue Jun  5 17:32:19 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Jun  5 17:32:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src21.csv
[Tue Jun  5 17:32:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:32:21 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Jun  5 17:32:21 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Jun  5 17:32:21 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Jun  5 17:33:00 2012] Spatial fit model total counts = 1612.210000, observed total counts = 1616.000000
[Tue Jun  5 17:33:00 2012] Offset between fit and detection position for source 91 = 0.223204 pixels
[Tue Jun  5 17:33:00 2012] 1572.485000 total counts/ 1438.580000 bgd. counts: snr = 3.530448
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 0.223204 pixels
  Position = (220.1, 289.2) = 8 35 50.99 -45 9 37.6
  Extent = 11.6 (3.9-18.3)", rotation angle = 0
  Source counts = 133.9 +/- 39.7
  Background counts = 1438.6
  Rate = 0.001 +/- 0.0004
[Tue Jun  5 17:33:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:33:01 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 17:33:01 2012] Source does appear to be extended
[Tue Jun  5 17:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 17:33:01 2012] Source is confused with source 90
[Wed Jun  6 06:51:52 2012] XMMSAS src. selection expression = ellipse(19102.795020, 25108.840000, 694.200020, 694.200020, 0.000000, X, Y)
[Wed Jun  6 06:51:52 2012] Writing source region out to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src91_src.reg
[Wed Jun  6 06:51:52 2012] Extracting stamp from image fullrun_mos1_xmm0510390301_pi300-10000_cl_sm2.00.img.gz, (180, 249) - (260, 329)
[Wed Jun  6 06:51:52 2012] XMMSAS bgd. selection expression = annulus(19102.795020, 25108.840000, 1157.000033, 2314.000067, X, Y) && !ellipse(16456.746000, 25684.717600, 941.216027, 941.216027, 0.000000, X, Y) && !ellipse(16174.861374, 27343.649658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16894.359711, 26101.916351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17552.643692, 24722.973785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16059.710000, 26952.480000, 1669.056048, 1669.056048, 0.000000, X, Y) && !ellipse(21874.554000, 28355.728000, 1328.464038, 474.539214, 139.574000, X, Y) && !ellipse(17996.159698, 25352.730804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17963.567886, 25782.739349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16019.647034, 25972.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19852.248000, 27467.502000, 1439.080041, 1439.080041, 0.000000, X, Y) && !ellipse(20480.582123, 27177.580231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18329.478714, 24440.826477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22129.268000, 28549.859400, 1346.320039, 1346.320039, 0.000000, X, Y) && !ellipse(21033.178000, 27894.298000, 1803.000052, 1803.000052, 0.000000, X, Y) && !ellipse(18625.120000, 26765.822000, 1844.760053, 1844.760053, 120.250000, X, Y) && !ellipse(19407.510000, 26570.936680, 1500.760043, 1500.760043, 0.000000, X, Y) && !ellipse(18203.028000, 26220.660000, 1500.760043, 1500.760043, 0.000000, X, Y) && !ellipse(19670.429138, 25464.056183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20469.384537, 26660.661957, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun  6 06:51:52 2012] Writing fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src91.gif
[Wed Jun  6 06:59:44 2012] Mean detx,y = (-3598.38, 5125.29) 
[Wed Jun  6 06:59:45 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 06:59:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 06:59:58 2012] Setting source spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Wed Jun  6 06:59:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Wed Jun  6 07:26:21 2012] Updating aperture counts using extracted products
[Wed Jun  6 07:26:21 2012] Error reading totcts from fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Wed Jun  6 07:26:22 2012] No arf file for this source, not re-computing flux
[Wed Jun  6 07:26:23 2012] Flag c found in src. 91 procflags, skipping spectral fitting
[Wed Jun  6 07:26:23 2012] Source 91 has no response, skipping
[Wed Jun  6 07:26:24 2012] xmm0510390301/analysis//spectral/fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src91_pl.csv not found, spectral fit skipped or did not complete