[Mon Jun  4 11:42:16 2012] Detection parameters:
  Position = (207.0, 296.9) = 8 35 56.36 -45 9 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.7 +/- 18.8
  Background counts = 109.2
  Rate = 0.001 +/- 0.0003

[Mon Jun  4 11:42:17 2012] Off-axis axis estimate = 6.63'
[Mon Jun  4 20:20:45 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 20:20:45 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Mon Jun  4 20:20:45 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.199
[Mon Jun  4 20:20:45 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.74"
[Tue Jun  5 07:02:55 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src29.ximg exists
[Tue Jun  5 07:02:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src29.csv
[Tue Jun  5 07:02:55 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Jun  5 07:02:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src29.csv
[Tue Jun  5 07:02:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 07:02:58 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Jun  5 07:02:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue Jun  5 07:02:58 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Jun  5 07:02:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue Jun  5 07:02:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 07:03:43 2012] Source 87 is offset by -5.566691 and 1.308843 pixels which is larger than
2 X fitted extent = 1.325246 x 1.325246, not incorporating fit results
[Tue Jun  5 07:03:43 2012] Warning, spatial fit 29 centroid is now closest to src. 89
[Tue Jun  5 07:03:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 07:03:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 07:03:44 2012] Assessing source extent using major
[Tue Jun  5 07:03:44 2012] Source does appear to be extended
[Tue Jun  5 07:03:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 07:03:44 2012] Source is confused with source 89
[Tue Jun  5 08:35:04 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 08:35:04 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Tue Jun  5 08:35:04 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.199
[Tue Jun  5 08:35:04 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 9.74"
[Tue Jun  5 17:32:19 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src26.ximg exists
[Tue Jun  5 17:32:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src26.csv
[Tue Jun  5 17:32:19 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Jun  5 17:32:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src26.csv
[Tue Jun  5 17:32:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:32:21 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Jun  5 17:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jun  5 17:32:21 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Jun  5 17:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jun  5 17:32:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:33:00 2012] Spatial fit model total counts = 3739.420000, observed total counts = 3219.000000
[Tue Jun  5 17:33:00 2012] Poor agreement between spatial fit and data for source 87
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  5 17:33:00 2012] Warning, spatial fit 26 centroid is now closest to src. 89
[Tue Jun  5 17:33:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:33:01 2012] Assessing source extent using major
[Tue Jun  5 17:33:01 2012] Source does appear to be extended
[Tue Jun  5 17:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 06:51:52 2012] XMMSAS src. selection expression = ellipse(17963.567886, 25782.739349, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  6 06:51:52 2012] Writing source region out to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src87_src.reg
[Wed Jun  6 06:51:52 2012] Extracting stamp from image fullrun_mos1_xmm0510390301_pi300-10000_cl_sm2.00.img.gz, (170, 259) - (245, 334)
[Wed Jun  6 06:51:52 2012] XMMSAS bgd. selection expression = annulus(17963.567886, 25782.739349, 1087.500000, 2175.000000, X, Y) && !ellipse(16456.746000, 25684.717600, 941.216027, 941.216027, 0.000000, X, Y) && !ellipse(16174.861374, 27343.649658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16894.359711, 26101.916351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15797.318863, 27867.147095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14932.096588, 28208.724579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17552.643692, 24722.973785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16059.710000, 26952.480000, 1669.056048, 1669.056048, 0.000000, X, Y) && !ellipse(17996.159698, 25352.730804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19102.795020, 25108.840000, 925.600027, 925.600027, 0.000000, X, Y) && !ellipse(16019.647034, 25972.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19852.248000, 27467.502000, 1439.080041, 1439.080041, 0.000000, X, Y) && !ellipse(20480.582123, 27177.580231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15540.577530, 26681.519867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18329.478714, 24440.826477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21033.178000, 27894.298000, 1803.000052, 1803.000052, 0.000000, X, Y) && !ellipse(18625.120000, 26765.822000, 1844.760053, 1844.760053, 120.250000, X, Y) && !ellipse(19407.510000, 26570.936680, 1500.760043, 1500.760043, 0.000000, X, Y) && !ellipse(18203.028000, 26220.660000, 1500.760043, 1500.760043, 0.000000, X, Y) && !ellipse(19670.429138, 25464.056183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20469.384537, 26660.661957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15724.361313, 28637.190552, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun  6 06:51:52 2012] Writing fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src87.gif
[Wed Jun  6 07:01:53 2012] Mean detx,y = (-4686.18, 5874.69) 
[Wed Jun  6 07:01:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 07:02:06 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 07:02:06 2012] Setting source spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Wed Jun  6 07:02:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Wed Jun  6 07:23:50 2012] Not generating rmf since there are only 93 counts
[Wed Jun  6 07:23:50 2012] rmf not generated due to insufficient counts
[Wed Jun  6 07:26:21 2012] Updating aperture counts using extracted products
[Wed Jun  6 07:26:21 2012] Error reading totcts from fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Wed Jun  6 07:26:22 2012] No arf file for this source, not re-computing flux
[Wed Jun  6 07:26:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  6 07:26:24 2012] xmm0510390301/analysis//spectral/fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src87_pl.csv not found, spectral fit skipped or did not complete