[Mon Jun 4 11:42:16 2012] Detection parameters: Position = (241.6, 312.0) = 8 35 42.12 -45 7 57.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 94.2 +/- 18.4 Background counts = 100.3 Rate = 0.001 +/- 0.0002 [Mon Jun 4 11:42:17 2012] Off-axis axis estimate = 4.23' [Mon Jun 4 20:20:45 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting [Mon Jun 4 20:20:45 2012] Initial guess for spatial extent in simple fitting = 8.54" [Mon Jun 4 20:20:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029 [Mon Jun 4 20:20:45 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 8.54" [Tue Jun 5 07:02:56 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src48.ximg exists [Tue Jun 5 07:02:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src48.csv [Tue Jun 5 07:02:56 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src48_1.ximg exists [Tue Jun 5 07:02:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src48.csv [Tue Jun 5 07:02:56 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src48_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 5 07:02:59 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src48.ximg exists [Tue Jun 5 07:02:59 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists [Tue Jun 5 07:02:59 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly [Tue Jun 5 07:03:43 2012] Source 75 is offset by -3.658389 and -5.134680 pixels which is larger than 2 X fitted extent = 0.982161 x 0.982161, not incorporating fit results [Tue Jun 5 07:03:44 2012] Vigneting correction estimate = 1.000000 [Tue Jun 5 07:03:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 5 07:03:44 2012] Assessing source extent using major [Tue Jun 5 07:03:44 2012] Source does appear to be extended [Tue Jun 5 07:03:44 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jun 5 07:03:44 2012] Source is confused with source 73 [Tue Jun 5 08:35:04 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting [Tue Jun 5 08:35:04 2012] Initial guess for spatial extent in simple fitting = 8.54" [Tue Jun 5 08:35:04 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029 [Tue Jun 5 08:35:04 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 8.54" [Tue Jun 5 17:32:19 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src42.ximg exists [Tue Jun 5 17:32:19 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src42_1.ximg exists [Tue Jun 5 17:32:19 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src42 appears to have run properly [Tue Jun 5 17:32:22 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src42.ximg exists [Tue Jun 5 17:32:22 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists [Tue Jun 5 17:32:22 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly [Tue Jun 5 17:33:00 2012] Spatial fit model total counts = 2012.210000, observed total counts = 2019.000000 [Tue Jun 5 17:33:00 2012] Offset between fit and detection position for source 75 = 9.243253 pixels [Tue Jun 5 17:33:00 2012] Warning, changing simple spatial fit ID from 42 to 16 [Tue Jun 5 17:33:00 2012] 1648.738000 total counts/ 1415.840000 bgd. counts: snr = 6.189544 Spatial fit parameters: Offset between fit and detection position for source 75 = 9.243253 pixels Position = (242.3, 321.2) = 8 35 41.84 -45 7 18.4 Extent = 22.5 (22.5-45.1)", rotation angle = 0 Source counts = 232.9 +/- 40.6 Background counts = 1415.8 Rate = 0.003 +/- 0.0004 [Tue Jun 5 17:33:01 2012] Vigneting correction estimate = 1.000000 [Tue Jun 5 17:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 5 17:33:01 2012] Assessing source extent using major axis lower bound [Tue Jun 5 17:33:01 2012] Source does appear to be extended [Tue Jun 5 17:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 6 06:51:53 2012] XMMSAS src. selection expression = ellipse(21033.178000, 27894.298000, 1352.250039, 1352.250039, 0.000000, X, Y) [Wed Jun 6 06:51:53 2012] Writing source region out to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src75_src.reg [Wed Jun 6 06:51:53 2012] Extracting stamp from image fullrun_mos1_xmm0510390301_pi300-10000_cl_sm2.00.img.gz, (165, 243) - (320, 399) [Wed Jun 6 06:51:53 2012] XMMSAS bgd. selection expression = annulus(21033.178000, 27894.298000, 2253.750065, 4507.500130, X, Y) && !ellipse(16456.746000, 25684.717600, 941.216027, 941.216027, 0.000000, X, Y) && !ellipse(25252.582600, 29941.590200, 1289.280037, 1289.280037, 0.000000, X, Y) && !ellipse(16174.861374, 27343.649658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16894.359711, 26101.916351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15797.318863, 27867.147095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17552.643692, 24722.973785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16059.710000, 26952.480000, 1669.056048, 1669.056048, 0.000000, X, Y) && !ellipse(25991.188000, 30122.659600, 2571.336074, 2571.336074, 0.000000, X, Y) && !ellipse(21874.554000, 28355.728000, 1328.464038, 474.539214, 139.574000, X, Y) && !ellipse(17996.159698, 25352.730804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19102.795020, 25108.840000, 925.600027, 925.600027, 0.000000, X, Y) && !ellipse(26825.026000, 30890.864000, 1336.776038, 1336.776038, 0.000000, X, Y) && !ellipse(17963.567886, 25782.739349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16019.647034, 25972.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19852.248000, 27467.502000, 1439.080041, 1439.080041, 0.000000, X, Y) && !ellipse(20480.582123, 27177.580231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18329.478714, 24440.826477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22129.268000, 28549.859400, 1346.320039, 1346.320039, 0.000000, X, Y) && !ellipse(22981.339200, 29060.000400, 1314.368038, 571.936016, 310.692000, X, Y) && !ellipse(18625.120000, 26765.822000, 1844.760053, 1844.760053, 120.250000, X, Y) && !ellipse(19407.510000, 26570.936680, 1500.760043, 1500.760043, 0.000000, X, Y) && !ellipse(18203.028000, 26220.660000, 1500.760043, 1500.760043, 0.000000, X, Y) && !ellipse(19670.429138, 25464.056183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20469.384537, 26660.661957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15724.361313, 28637.190552, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jun 6 06:51:53 2012] Writing fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src75.gif [Wed Jun 6 07:08:15 2012] Mean detx,y = (-5030.88, 2186.40) [Wed Jun 6 07:08:16 2012] Setting backscal keywords in source and bgd. spectrum [Wed Jun 6 07:08:37 2012] Binned source spectrum to 10 counts/bin [Wed Jun 6 07:08:38 2012] Setting source spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src75_src_b10.pi.gz [Wed Jun 6 07:08:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src75_bgd.pi.gz [Wed Jun 6 07:26:22 2012] Updating aperture counts using extracted products [Wed Jun 6 07:26:22 2012] Error reading totcts from fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src75_src_b10.pi.gz [Wed Jun 6 07:26:22 2012] No arf file for this source, not re-computing flux [Wed Jun 6 07:26:23 2012] Flag b found in src. 75 procflags, skipping spectral fitting [Wed Jun 6 07:26:23 2012] Flag c found in src. 75 procflags, skipping spectral fitting [Wed Jun 6 07:26:23 2012] Source 75 has no response, skipping [Wed Jun 6 07:26:24 2012] xmm0510390301/analysis//spectral/fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src75_pl.csv not found, spectral fit skipped or did not complete