[Mon Jun  4 11:42:14 2012] Detection parameters:
  Position = (360.4, 432.1) = 8 34 53.37 -44 59 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.5 +/- 16.3
  Background counts = 64.4
  Rate = 0.0007 +/- 0.0002

[Mon Jun  4 11:42:17 2012] Off-axis axis estimate = 10.68'
[Mon Jun  4 20:20:45 2012] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 20:20:45 2012] Initial guess for spatial extent in simple fitting = 11.77"
[Mon Jun  4 20:20:45 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.022
[Mon Jun  4 20:20:45 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 11.77"
[Tue Jun  5 07:02:57 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src90.ximg exists
[Tue Jun  5 07:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src90.csv
[Tue Jun  5 07:02:57 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src90_1.ximg exists
[Tue Jun  5 07:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src90.csv
[Tue Jun  5 07:02:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 07:03:01 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Tue Jun  5 07:03:02 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Tue Jun  5 07:03:02 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Tue Jun  5 07:03:43 2012] Source 60 is offset by -6.000213 and -4.343239 pixels which is larger than
2 X fitted extent = 1.363412 x 1.363412, not incorporating fit results
[Tue Jun  5 07:03:43 2012] Warning, spatial fit 90 centroid is now closest to src. 26
[Tue Jun  5 07:03:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 07:03:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 07:03:44 2012] Assessing source extent using major
[Tue Jun  5 07:03:44 2012] Source does appear to be extended
[Tue Jun  5 07:03:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 07:03:44 2012] Source is confused with source 36
[Tue Jun  5 08:35:04 2012] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 08:35:04 2012] Initial guess for spatial extent in simple fitting = 11.77"
[Tue Jun  5 08:35:04 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.022
[Tue Jun  5 08:35:04 2012] Giving source the simple spatial ID 81 for pass 1, mean size = 11.77"
[Tue Jun  5 17:32:20 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src81.ximg exists
[Tue Jun  5 17:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src81.csv
[Tue Jun  5 17:32:20 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src81_1.ximg exists
[Tue Jun  5 17:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src81.csv
[Tue Jun  5 17:32:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:32:23 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Tue Jun  5 17:32:23 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Tue Jun  5 17:32:23 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src81 appears to have run properly
[Tue Jun  5 17:33:01 2012] Source 60 is offset by 4.009925 and -4.934267 pixels which is larger than
2 X fitted extent = 2.388225 x 2.388225, not incorporating fit results
[Tue Jun  5 17:33:01 2012] Warning, spatial fit 81 centroid is now closest to src. 32
[Tue Jun  5 17:33:01 2012] Spatial fit model total counts = 948.439000, observed total counts = 934.000000
[Tue Jun  5 17:33:01 2012] Offset between fit and detection position for source 60 = 8.808555 pixels
[Tue Jun  5 17:33:01 2012] Warning, changing simple spatial fit ID from 81 to 83
[Tue Jun  5 17:33:01 2012] 907.187000 total counts/ 721.836000 bgd. counts: snr = 6.898834
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 8.808555 pixels
  Position = (367.8, 427.2) = 8 34 50.35 -44 59 37.0
  Extent = 22.9 (20.7-24.0)", rotation angle = 0
  Source counts = 185.4 +/- 30.1
  Background counts = 721.8
  Rate = 0.002 +/- 0.0003
[Tue Jun  5 17:33:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:33:01 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 17:33:01 2012] Source does appear to be extended
[Tue Jun  5 17:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 06:51:54 2012] XMMSAS src. selection expression = ellipse(31947.614000, 37120.180000, 1373.604040, 1373.604040, 0.000000, X, Y)
[Wed Jun  6 06:51:54 2012] Writing source region out to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src60_src.reg
[Wed Jun  6 06:51:54 2012] Extracting stamp from image fullrun_mos1_xmm0510390301_pi300-10000_cl_sm2.00.img.gz, (289, 348) - (447, 506)
[Wed Jun  6 06:51:54 2012] XMMSAS bgd. selection expression = annulus(31947.614000, 37120.180000, 2289.340066, 4578.680132, X, Y) && !ellipse(27748.231400, 37309.106200, 894.032026, 894.032026, 0.000000, X, Y) && !ellipse(27482.645752, 38057.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25991.188000, 30122.659600, 2571.336074, 2571.336074, 0.000000, X, Y) && !ellipse(26792.752319, 38405.914185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27239.338867, 36425.288879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28826.053406, 36842.465668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27263.786000, 38600.262200, 1863.320054, 1863.320054, 354.702000, X, Y) && !ellipse(29440.808400, 36252.688000, 1765.408051, 1765.408051, 0.000000, X, Y) && !ellipse(26597.942200, 37895.349396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27723.379913, 35465.455963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27002.303162, 37040.483063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29443.374268, 37638.995697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27994.657400, 37121.118000, 1374.824040, 1374.824040, 0.000000, X, Y) && !ellipse(28043.528000, 38761.212000, 1920.048055, 1920.048055, 0.000000, X, Y) && !ellipse(35847.092529, 31972.117096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29863.272000, 38922.424000, 1900.056055, 1900.056055, 0.000000, X, Y) && !ellipse(35449.900146, 32401.735352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30165.712000, 36266.520000, 1829.624053, 1829.624053, 0.000000, X, Y) && !ellipse(27956.156952, 38310.123383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30919.982086, 36839.574341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28673.569763, 39000.160187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29785.456207, 37968.336151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32830.294250, 37318.294708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29322.366000, 39233.592000, 1966.512057, 1513.992044, 24.665000, X, Y) && !ellipse(29834.476000, 39449.232000, 1935.904056, 1935.904056, 0.000000, X, Y)
[Wed Jun  6 06:51:54 2012] Writing fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src60.gif
[Wed Jun  6 07:21:10 2012] Mean detx,y = (-8865.69, -11486.62) 
[Wed Jun  6 07:21:11 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 07:21:43 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 07:21:43 2012] Setting source spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Jun  6 07:21:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Wed Jun  6 07:26:22 2012] Updating aperture counts using extracted products
[Wed Jun  6 07:26:22 2012] Error reading totcts from fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Jun  6 07:26:22 2012] No arf file for this source, not re-computing flux
[Wed Jun  6 07:26:23 2012] Flag b found in src. 60 procflags, skipping spectral fitting
[Wed Jun  6 07:26:23 2012] Flag c found in src. 60 procflags, skipping spectral fitting
[Wed Jun  6 07:26:23 2012] Source 60 has no response, skipping
[Wed Jun  6 07:26:24 2012] xmm0510390301/analysis//spectral/fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete