[Mon Jun 4 11:42:14 2012] Detection parameters: Position = (340.9, 449.0) = 8 35 1.38 -44 58 2.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 105.4 +/- 16.9 Background counts = 42.0 Rate = 0.001 +/- 0.0002 [Mon Jun 4 11:42:17 2012] Off-axis axis estimate = 11.34' [Mon Jun 4 20:20:45 2012] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting [Mon Jun 4 20:20:45 2012] Initial guess for spatial extent in simple fitting = 12.10" [Mon Jun 4 20:20:45 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836 [Mon Jun 4 20:20:45 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 12.10" [Tue Jun 5 07:02:56 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src58.ximg exists [Tue Jun 5 07:02:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src58.csv [Tue Jun 5 07:02:56 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src58_1.ximg exists [Tue Jun 5 07:02:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src58.csv [Tue Jun 5 07:02:56 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src58_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 5 07:03:00 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src58.ximg exists [Tue Jun 5 07:03:00 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists [Tue Jun 5 07:03:00 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly [Tue Jun 5 07:03:43 2012] Warning, spatial fit 58 centroid is now closest to src. 95 [Tue Jun 5 07:03:43 2012] Spatial fit model total counts = 1338.160000, observed total counts = 1332.000000 [Tue Jun 5 07:03:43 2012] Offset between fit and detection position for source 57 = 1.618328 pixels [Tue Jun 5 07:03:43 2012] Warning, changing simple spatial fit ID from 58 to 89 [Tue Jun 5 07:03:43 2012] 1128.178560 total counts/ 1118.280000 bgd. counts: snr = 0.296003 Spatial fit parameters: Offset between fit and detection position for source 57 = 1.618328 pixels Position = (340.0, 447.7) = 8 35 1.75 -44 58 8.3 Extent = 2.9" x 2.9", rotation angle = 0 Source counts = 9.9 +/- 33.6 Background counts = 1118.3 Rate = 0.0001 +/- 0.0004 Deleting source due to low Poisson probability