[Mon Jun  4 11:42:10 2012] Detection parameters:
  Position = (481.1, 282.9) = 8 34 3.64 -45 10 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.5 +/- 20.6
  Background counts = 95.0
  Rate = 0.001 +/- 0.0002

[Mon Jun  4 11:42:17 2012] Off-axis axis estimate = 13.29'
[Mon Jun  4 20:20:45 2012] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 20:20:45 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Mon Jun  4 20:20:45 2012] source mask rpix=3.0, npix_max = 49, mask sum = 40, frac = 0.814
[Mon Jun  4 20:20:45 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 13.07"
[Tue Jun  5 07:02:56 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src71.ximg exists
[Tue Jun  5 07:02:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src71.csv
[Tue Jun  5 07:02:56 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src71_1.ximg exists
[Tue Jun  5 07:02:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src71.csv
[Tue Jun  5 07:02:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 07:03:00 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Tue Jun  5 07:03:01 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Tue Jun  5 07:03:01 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Tue Jun  5 07:03:43 2012] Source 4 is offset by 5.813795 and 3.130243 pixels which is larger than
2 X fitted extent = 2.876166 x 2.876166, not incorporating fit results
[Tue Jun  5 07:03:43 2012] Spatial fit model total counts = 26374.300000, observed total counts = 1062.000000
[Tue Jun  5 07:03:43 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  5 07:03:43 2012] Warning, spatial fit 71 centroid is now closest to src. 3
[Tue Jun  5 07:03:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 07:03:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 07:03:44 2012] Assessing source extent using major
[Tue Jun  5 07:03:44 2012] Source does appear to be extended
[Tue Jun  5 07:03:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 08:35:04 2012] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 08:35:04 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Tue Jun  5 08:35:04 2012] source mask rpix=3.0, npix_max = 49, mask sum = 40, frac = 0.814
[Tue Jun  5 08:35:04 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 13.07"
[Tue Jun  5 17:32:20 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src63.ximg exists
[Tue Jun  5 17:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src63.csv
[Tue Jun  5 17:32:20 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src63_1.ximg exists
[Tue Jun  5 17:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src63.csv
[Tue Jun  5 17:32:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:32:22 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Tue Jun  5 17:32:22 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Tue Jun  5 17:32:22 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Tue Jun  5 17:33:00 2012] Spatial fit model total counts = 5.635960, observed total counts = 1852.000000
[Tue Jun  5 17:33:00 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  5 17:33:01 2012] Source 4 is offset by 3.142784 and 4.070978 pixels which is larger than
2 X fitted extent = 1.502772 x 1.502772, not incorporating fit results
[Tue Jun  5 17:33:01 2012] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.387926 pixels away
[Tue Jun  5 17:33:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:33:01 2012] Assessing source extent using major
[Tue Jun  5 17:33:01 2012] Source does appear to be extended
[Tue Jun  5 17:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 06:51:53 2012] XMMSAS src. selection expression = ellipse(41807.126190, 24560.077118, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  6 06:51:53 2012] Writing source region out to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src4_src.reg
[Wed Jun  6 06:51:53 2012] Extracting stamp from image fullrun_mos1_xmm0510390301_pi300-10000_cl_sm2.00.img.gz, (444, 245) - (519, 320)
[Wed Jun  6 06:51:53 2012] XMMSAS bgd. selection expression = annulus(41807.126190, 24560.077118, 1087.500000, 2175.000000, X, Y) && !ellipse(42263.276154, 23421.114685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42341.442871, 24996.232056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42524.520416, 24148.526337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42433.702484, 25615.719421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41728.781586, 22940.203918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42251.896698, 21980.137360, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun  6 06:51:53 2012] Writing fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src4.gif
[Wed Jun  6 07:15:34 2012] Mean detx,y = (6630.26, -15150.91) 
[Wed Jun  6 07:15:35 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 07:15:43 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 07:15:43 2012] Setting source spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun  6 07:15:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jun  6 07:24:04 2012] Not generating rmf since there are only 93 counts
[Wed Jun  6 07:24:04 2012] rmf not generated due to insufficient counts
[Wed Jun  6 07:26:22 2012] Updating aperture counts using extracted products
[Wed Jun  6 07:26:22 2012] Error reading totcts from fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun  6 07:26:22 2012] No arf file for this source, not re-computing flux
[Wed Jun  6 07:26:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  6 07:26:24 2012] xmm0510390301/analysis//spectral/fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete