[Mon Jun  4 11:42:12 2012] Detection parameters:
  Position = (377.9, 429.5) = 8 34 46.19 -44 59 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.9 +/- 14.8
  Background counts = 63.5
  Rate = 0.0007 +/- 0.0002

[Mon Jun  4 11:42:17 2012] Off-axis axis estimate = 11.11'
[Mon Jun  4 20:20:45 2012] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 20:20:45 2012] Initial guess for spatial extent in simple fitting = 11.99"
[Mon Jun  4 20:20:45 2012] source mask rpix=2.8, npix_max = 42, mask sum = 40, frac = 0.944
[Mon Jun  4 20:20:45 2012] Giving source the simple spatial ID 92 for pass 0, mean size = 11.99"
[Tue Jun  5 07:02:57 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src92.ximg exists
[Tue Jun  5 07:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src92.csv
[Tue Jun  5 07:02:57 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src92_1.ximg exists
[Tue Jun  5 07:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src92.csv
[Tue Jun  5 07:02:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 07:03:02 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Tue Jun  5 07:03:02 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Tue Jun  5 07:03:02 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src92 appears to have run properly
[Tue Jun  5 07:03:44 2012] Warning: source 92 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.890249 pixels away
[Tue Jun  5 07:03:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 07:03:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 07:03:44 2012] Assessing source extent using major
[Tue Jun  5 07:03:44 2012] Source does appear to be extended
[Tue Jun  5 07:03:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 07:03:44 2012] Source is confused with source 32
[Tue Jun  5 08:35:04 2012] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 08:35:04 2012] Initial guess for spatial extent in simple fitting = 11.99"
[Tue Jun  5 08:35:04 2012] source mask rpix=2.8, npix_max = 42, mask sum = 40, frac = 0.944
[Tue Jun  5 08:35:04 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 11.99"
[Tue Jun  5 17:32:20 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src83.ximg exists
[Tue Jun  5 17:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src83.csv
[Tue Jun  5 17:32:20 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src83_1.ximg exists
[Tue Jun  5 17:32:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src83.csv
[Tue Jun  5 17:32:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:32:23 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Tue Jun  5 17:32:23 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Tue Jun  5 17:32:23 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Tue Jun  5 17:33:01 2012] Warning, spatial fit 83 centroid is now closest to src. 60
[Tue Jun  5 17:33:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:33:01 2012] Assessing source extent using major
[Tue Jun  5 17:33:01 2012] Source does appear to be extended
[Tue Jun  5 17:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 06:51:54 2012] XMMSAS src. selection expression = ellipse(32830.294250, 37318.294708, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  6 06:51:54 2012] Writing source region out to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src29_src.reg
[Wed Jun  6 06:51:54 2012] Extracting stamp from image fullrun_mos1_xmm0510390301_pi300-10000_cl_sm2.00.img.gz, (340, 392) - (415, 467)
[Wed Jun  6 06:51:54 2012] XMMSAS bgd. selection expression = annulus(32830.294250, 37318.294708, 1087.500000, 2175.000000, X, Y) && !ellipse(29440.808400, 36252.688000, 1765.408051, 1765.408051, 0.000000, X, Y) && !ellipse(29863.272000, 38922.424000, 1900.056055, 1900.056055, 0.000000, X, Y) && !ellipse(30165.712000, 36266.520000, 1829.624053, 1829.624053, 0.000000, X, Y) && !ellipse(30919.982086, 36839.574341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29785.456207, 37968.336151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31947.614000, 37120.180000, 1831.472053, 1831.472053, 0.000000, X, Y) && !ellipse(29322.366000, 39233.592000, 1966.512057, 1513.992044, 24.665000, X, Y) && !ellipse(29834.476000, 39449.232000, 1935.904056, 1935.904056, 0.000000, X, Y)
[Wed Jun  6 06:51:54 2012] Writing fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src29.gif
[Wed Jun  6 07:22:10 2012] Mean detx,y = (-8756.00, -12447.94) 
[Wed Jun  6 07:22:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 07:22:19 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 07:22:19 2012] Setting source spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jun  6 07:22:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Jun  6 07:24:10 2012] Not generating rmf since there are only 63 counts
[Wed Jun  6 07:24:10 2012] rmf not generated due to insufficient counts
[Wed Jun  6 07:26:22 2012] Updating aperture counts using extracted products
[Wed Jun  6 07:26:22 2012] Error reading totcts from fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jun  6 07:26:22 2012] No arf file for this source, not re-computing flux
[Wed Jun  6 07:26:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  6 07:26:24 2012] xmm0510390301/analysis//spectral/fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete