[Mon Jun  4 11:42:11 2012] Detection parameters:
  Position = (316.3, 442.9) = 8 35 11.46 -44 58 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.7 +/- 19.9
  Background counts = 65.7
  Rate = 0.001 +/- 0.0002

[Mon Jun  4 11:42:17 2012] Off-axis axis estimate = 10.55'
[Mon Jun  4 20:20:45 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 20:20:45 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Mon Jun  4 20:20:45 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Mon Jun  4 20:20:45 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.71"
[Tue Jun  5 07:02:55 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src27.ximg exists
[Tue Jun  5 07:02:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src27.csv
[Tue Jun  5 07:02:55 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Jun  5 07:02:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src27.csv
[Tue Jun  5 07:02:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 07:02:58 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Jun  5 07:02:58 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Jun  5 07:02:58 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Jun  5 07:03:43 2012] Warning, spatial fit 27 centroid is now closest to src. 20
[Tue Jun  5 07:03:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 07:03:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 07:03:44 2012] Assessing source extent using major
[Tue Jun  5 07:03:44 2012] Source does appear to be extended
[Tue Jun  5 07:03:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 07:03:44 2012] Source is confused with source 7
[Tue Jun  5 08:35:04 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 08:35:04 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Tue Jun  5 08:35:04 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Tue Jun  5 08:35:04 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 11.71"
[Tue Jun  5 17:32:19 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src24.ximg exists
[Tue Jun  5 17:32:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src24.csv
[Tue Jun  5 17:32:19 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue Jun  5 17:32:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src24.csv
[Tue Jun  5 17:32:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:32:21 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue Jun  5 17:32:21 2012] fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Jun  5 17:32:21 2012] Fit fullrun_mos1_xmm0510390301_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue Jun  5 17:33:00 2012] Spatial fit model total counts = 1283.700000, observed total counts = 1278.000000
[Tue Jun  5 17:33:00 2012] Offset between fit and detection position for source 19 = 2.709210 pixels
[Tue Jun  5 17:33:00 2012] Warning, changing simple spatial fit ID from 24 to 14
[Tue Jun  5 17:33:00 2012] 1150.210000 total counts/ 884.370000 bgd. counts: snr = 8.939296
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 2.709210 pixels
  Position = (313.9, 444.2) = 8 35 12.43 -44 58 23.3
  Extent = 23.3" x 23.3", rotation angle = 355
  Source counts = 265.8 +/- 33.9
  Background counts = 884.4
  Rate = 0.003 +/- 0.0004
[Tue Jun  5 17:33:01 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:33:01 2012] Assessing source extent using major
[Tue Jun  5 17:33:01 2012] Source does appear to be extended
[Tue Jun  5 17:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 06:51:52 2012] XMMSAS src. selection expression = ellipse(27263.786000, 38600.262200, 1397.490040, 1397.490040, 354.702000, X, Y)
[Wed Jun  6 06:51:52 2012] Writing source region out to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src19_src.reg
[Wed Jun  6 06:51:52 2012] Extracting stamp from image fullrun_mos1_xmm0510390301_pi300-10000_cl_sm2.00.img.gz, (234, 364) - (394, 525)
[Wed Jun  6 06:51:52 2012] XMMSAS bgd. selection expression = annulus(27263.786000, 38600.262200, 2329.150067, 4658.300134, X, Y) && !ellipse(27748.231400, 37309.106200, 894.032026, 894.032026, 0.000000, X, Y) && !ellipse(27482.645752, 38057.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26792.752319, 38405.914185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27239.338867, 36425.288879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28826.053406, 36842.465668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.808400, 36252.688000, 1765.408051, 1765.408051, 0.000000, X, Y) && !ellipse(26597.942200, 37895.349396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27723.379913, 35465.455963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27002.303162, 37040.483063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29443.374268, 37638.995697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27994.657400, 37121.118000, 1374.824040, 1374.824040, 0.000000, X, Y) && !ellipse(28043.528000, 38761.212000, 1920.048055, 1920.048055, 0.000000, X, Y) && !ellipse(29863.272000, 38922.424000, 1900.056055, 1900.056055, 0.000000, X, Y) && !ellipse(30165.712000, 36266.520000, 1829.624053, 1829.624053, 0.000000, X, Y) && !ellipse(27956.156952, 38310.123383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30919.982086, 36839.574341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28673.569763, 39000.160187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26226.320404, 38484.771210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29785.456207, 37968.336151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31947.614000, 37120.180000, 1831.472053, 1831.472053, 0.000000, X, Y) && !ellipse(29322.366000, 39233.592000, 1966.512057, 1513.992044, 24.665000, X, Y) && !ellipse(29834.476000, 39449.232000, 1935.904056, 1935.904056, 0.000000, X, Y)
[Wed Jun  6 06:51:52 2012] Writing fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src19.gif
[Wed Jun  6 07:00:37 2012] Mean detx,y = (-11894.09, -7971.80) 
[Wed Jun  6 07:00:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 07:01:05 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 07:01:05 2012] Setting source spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jun  6 07:01:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Jun  6 07:26:21 2012] Updating aperture counts using extracted products
[Wed Jun  6 07:26:21 2012] Error reading totcts from fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jun  6 07:26:22 2012] No arf file for this source, not re-computing flux
[Wed Jun  6 07:26:23 2012] Flag c found in src. 19 procflags, skipping spectral fitting
[Wed Jun  6 07:26:23 2012] Source 19 has no response, skipping
[Wed Jun  6 07:26:24 2012] xmm0510390301/analysis//spectral/fullrun_mos1_xmm0510390301_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete