[Thu Feb 23 03:08:19 2012] Detection parameters:
  Position = (311.1, 296.0) = 8 35 17.49 -45 12 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.8 +/- 28.7
  Background counts = 121.1
  Rate = 0.03 +/- 0.003

[Thu Feb 23 03:08:20 2012] Off-axis axis estimate = 0.94'
[Thu Feb 23 03:33:11 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 03:33:11 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Thu Feb 23 03:33:11 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.920
[Thu Feb 23 03:33:11 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 6.90"
[Thu Feb 23 04:16:24 2012] fullrun_mos1_xmm0510390201_pi300-10000_cl_pass0_src4.ximg exists
[Thu Feb 23 04:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390201_pi300-10000_cl_pass0_src4.csv
[Thu Feb 23 04:16:24 2012] fullrun_mos1_xmm0510390201_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Feb 23 04:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390201_pi300-10000_cl_pass0_src4.csv
[Thu Feb 23 04:16:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 04:16:24 2012] fullrun_mos1_xmm0510390201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Feb 23 04:16:24 2012] fullrun_mos1_xmm0510390201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Feb 23 04:16:24 2012] Fit fullrun_mos1_xmm0510390201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Feb 23 04:16:28 2012] Warning, spatial fit 4 centroid is now closest to src. 5
[Thu Feb 23 04:16:28 2012] Source 7 is offset by 0.409551 and -7.501319 pixels which is larger than
2 X fitted extent = 6.529517 x 6.529517, not incorporating fit results
[Thu Feb 23 04:16:28 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.897886 pixels away
[Thu Feb 23 04:16:28 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 04:16:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 04:16:28 2012] Assessing source extent using major
[Thu Feb 23 04:16:28 2012] Source does appear to be extended
[Thu Feb 23 04:16:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 04:16:28 2012] Source is confused with source 6
[Thu Feb 23 04:16:28 2012] Source is confused with source 5
[Thu Feb 23 04:21:44 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 04:21:44 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Thu Feb 23 04:21:44 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.920
[Thu Feb 23 04:21:44 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.90"
[Thu Feb 23 04:49:47 2012] fullrun_mos1_xmm0510390201_pi300-10000_cl_pass1_src3.ximg exists
[Thu Feb 23 04:49:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390201_pi300-10000_cl_pass1_src3.csv
[Thu Feb 23 04:49:47 2012] fullrun_mos1_xmm0510390201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Feb 23 04:49:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510390201_pi300-10000_cl_pass1_src3.csv
[Thu Feb 23 04:49:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510390201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510390201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 04:49:47 2012] fullrun_mos1_xmm0510390201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Feb 23 04:49:47 2012] fullrun_mos1_xmm0510390201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Feb 23 04:49:47 2012] Fit fullrun_mos1_xmm0510390201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Feb 23 04:49:52 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Thu Feb 23 04:49:52 2012] Source 7 is offset by -0.455966 and -9.069871 pixels which is larger than
2 X fitted extent = 1.585366 x 1.585366, not incorporating fit results
[Thu Feb 23 04:49:52 2012] Source 7 is offset by 2.383206 and -7.240353 pixels which is larger than
2 X fitted extent = 1.721071 x 1.721071, not incorporating fit results
[Thu Feb 23 04:49:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 04:49:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 04:49:52 2012] Assessing source extent using major
[Thu Feb 23 04:49:52 2012] Source does appear to be extended
[Thu Feb 23 04:49:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 05:02:18 2012] XMMSAS src. selection expression = ellipse(27018.474945, 25705.953247, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 23 05:02:18 2012] Writing source region out to fullrun_mos1_xmm0510390201_pi300-10000_pass1_cl_src7_src.reg
[Thu Feb 23 05:02:18 2012] Extracting stamp from image fullrun_mos1_xmm0510390201_pi300-10000_cl_sm2.00.img.gz, (274, 259) - (349, 334)
[Thu Feb 23 05:02:18 2012] XMMSAS bgd. selection expression = annulus(27018.474945, 25705.953247, 1087.500000, 2175.000000, X, Y) && !ellipse(26351.080600, 27888.589800, 2683.416077, 2683.416077, 0.000000, X, Y) && !ellipse(27515.480499, 25707.198456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27532.356000, 25376.542000, 1103.416032, 1103.416032, 0.000000, X, Y) && !ellipse(27689.206000, 25263.402000, 1136.136033, 1136.136033, 0.000000, X, Y) && !ellipse(28526.645752, 27354.004272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24985.256000, 24707.154000, 1088.488031, 1088.488031, 0.000000, X, Y)
[Thu Feb 23 05:02:18 2012] Writing fullrun_mos1_xmm0510390201_pi300-10000_pass1_cl_src7.gif
[Thu Feb 23 05:14:42 2012] Mean detx,y = (-2025.57, -432.06) 
[Thu Feb 23 05:14:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 05:14:59 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 05:15:00 2012] Setting source spectrum file to fullrun_mos1_xmm0510390201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Feb 23 05:15:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510390201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Feb 23 05:54:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 23 05:54:27 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:36:09 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:36:09 2012] Error reading totcts from fullrun_mos1_xmm0510390201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Feb 23 06:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:36:09 2012] Using photon index=1.80, rate=0.0271, arf fullrun_mos1_xmm0510390201_pi300-10000_pass1_cl_src7.arf
[Thu Feb 23 06:36:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:36:10 2012] Updating source flux to 2.8e-13
[Thu Feb 23 06:36:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting