[Sat Mar  3 15:02:59 2012] Detection parameters:
  Position = (259.3, 297.2) = 22 48 40.92 -51 9 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56397.9 +/- 277.3
  Background counts = 53.5
  Rate = 0.9 +/- 0.005

[Sat Mar  3 15:03:00 2012] Off-axis axis estimate = 2.84'
[Sat Mar  3 16:02:13 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 16:02:13 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Sat Mar  3 16:02:13 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.942
[Sat Mar  3 16:02:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.85"
[Sat Mar  3 17:00:25 2012] fullrun_mos2_xmm0510380101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar  3 17:00:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510380101_pi300-10000_cl_pass0_src1.csv
[Sat Mar  3 17:00:25 2012] fullrun_mos2_xmm0510380101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar  3 17:00:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510380101_pi300-10000_cl_pass0_src1.csv
[Sat Mar  3 17:00:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510380101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510380101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 17:00:26 2012] fullrun_mos2_xmm0510380101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar  3 17:00:26 2012] fullrun_mos2_xmm0510380101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar  3 17:00:26 2012] Fit fullrun_mos2_xmm0510380101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar  3 17:00:34 2012] Spatial fit model total counts = 50535.200000, observed total counts = 50549.000000
[Sat Mar  3 17:00:34 2012] Offset between fit and detection position for source 1 = 0.143627 pixels
[Sat Mar  3 17:00:34 2012] 50766.200000 total counts/ 11155.900000 bgd. counts: snr = 375.021205
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.143627 pixels
  Position = (259.3, 297.3) = 22 48 40.93 -51 9 53.5
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 39610.3 +/- 225.3
  Background counts = 11155.9
  Rate = 0.6 +/- 0.004
[Sat Mar  3 17:00:34 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 17:00:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 17:00:34 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 17:00:34 2012] Source does appear to be extended
[Sat Mar  3 17:00:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 17:18:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar  3 17:18:57 2012] Initial guess for spatial extent in simple fitting = 5.31"
[Sat Mar  3 17:18:57 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.759
[Sat Mar  3 17:18:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.31"
[Sat Mar  3 17:37:01 2012] fullrun_mos2_xmm0510380101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar  3 17:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510380101_pi300-10000_cl_pass1_src1.csv
[Sat Mar  3 17:37:01 2012] fullrun_mos2_xmm0510380101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar  3 17:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510380101_pi300-10000_cl_pass1_src1.csv
[Sat Mar  3 17:37:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510380101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510380101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 17:37:01 2012] fullrun_mos2_xmm0510380101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar  3 17:37:01 2012] fullrun_mos2_xmm0510380101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar  3 17:37:01 2012] Fit fullrun_mos2_xmm0510380101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar  3 17:37:06 2012] Spatial fit model total counts = 50511.900000, observed total counts = 50549.000000
[Sat Mar  3 17:37:06 2012] Offset between fit and detection position for source 1 = 0.000129 pixels
[Sat Mar  3 17:37:06 2012] 50741.800000 total counts/ 11132.600000 bgd. counts: snr = 375.403026
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000129 pixels
  Position = (259.3, 297.3) = 22 48 40.93 -51 9 53.5
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 39609.2 +/- 225.3
  Background counts = 11132.6
  Rate = 0.6 +/- 0.004
[Sat Mar  3 17:37:06 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 17:37:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 17:37:06 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 17:37:06 2012] Source does appear to be extended
[Sat Mar  3 17:37:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 19:17:58 2012] Counts = 39609.200000, rescaling region sizes by 3.000000
[Sat Mar  3 19:17:58 2012] XMMSAS src. selection expression = ellipse(22512.690000, 25817.114600, 956.763028, 956.763028, 0.000000, X, Y)
[Sat Mar  3 19:17:58 2012] Writing source region out to fullrun_mos2_xmm0510380101_pi300-10000_pass1_cl_src1_src.reg
[Sat Mar  3 19:17:58 2012] Extracting stamp from image fullrun_mos2_xmm0510380101_pi300-10000_cl_sm2.00.img.gz, (204, 242) - (314, 352)
[Sat Mar  3 19:17:58 2012] XMMSAS bgd. selection expression = annulus(22512.690000, 25817.114600, 4783.815138, 9567.630275, X, Y) && !ellipse(32517.364532, 25355.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23025.956055, 24929.147430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24664.308258, 28186.945374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16996.522583, 30241.130920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22971.230591, 17916.495544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24986.822632, 21453.845505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12542.947235, 19063.752289, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar  3 19:17:58 2012] Writing fullrun_mos2_xmm0510380101_pi300-10000_pass1_cl_src1.gif
[Sat Mar  3 19:18:05 2012] Mean detx,y = (-1739.95, 82.04) 
[Sat Mar  3 19:18:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar  3 19:19:55 2012] Binned source spectrum to 10 counts/bin
[Sat Mar  3 19:19:55 2012] Setting source spectrum file to fullrun_mos2_xmm0510380101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar  3 19:19:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0510380101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Mar  3 19:38:24 2012] Updating aperture counts using extracted products
[Sat Mar  3 19:38:24 2012] Error reading totcts from fullrun_mos2_xmm0510380101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar  3 19:38:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar  3 19:38:25 2012] Using photon index=1.80, rate=0.618, arf fullrun_mos2_xmm0510380101_pi300-10000_pass1_cl_src1.arf
[Sat Mar  3 19:38:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar  3 19:38:25 2012] Updating source flux to 5.8e-12
[Sat Mar  3 19:39:04 2012] Reading fit data from xmm0510380101/analysis//spectral/fullrun_mos2_xmm0510380101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Mar  3 19:39:04 2012] Spectral fit parameter nH value = 2.17726e+12
[Sat Mar  3 19:39:04 2012] Spectral fit parameter PhoIndex value = 2.01852
[Sat Mar  3 19:39:04 2012] Failed to get F(0.3-8.0) from xmm0510380101/analysis//spectral/fullrun_mos2_xmm0510380101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Mar  3 19:39:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar  3 19:39:04 2012] Using Nh = 2.2e+12, photon index=2.02, rate=0.618, arf fullrun_mos2_xmm0510380101_pi300-10000_pass1_cl_src1.arf
[Sat Mar  3 19:39:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar  3 19:39:04 2012] Updating source flux to 5.3e-12