[Sat Mar  3 15:02:43 2012] Detection parameters:
  Position = (259.5, 297.2) = 22 48 40.86 -51 9 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58534.2 +/- 283.8
  Background counts = 64.4
  Rate = 0.9 +/- 0.004

[Sat Mar  3 15:02:43 2012] Off-axis axis estimate = 2.83'
[Sat Mar  3 15:42:02 2012] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 15:42:02 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Sat Mar  3 15:42:02 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.179
[Sat Mar  3 15:42:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.84"
[Sat Mar  3 16:02:12 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar  3 16:02:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src1.csv
[Sat Mar  3 16:02:12 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar  3 16:02:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src1.csv
[Sat Mar  3 16:02:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 16:02:12 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar  3 16:02:12 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar  3 16:02:12 2012] Fit fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar  3 17:00:31 2012] Spatial fit model total counts = 50857.400000, observed total counts = 50826.000000
[Sat Mar  3 17:00:31 2012] Offset between fit and detection position for source 3 = 0.212208 pixels
[Sat Mar  3 17:00:31 2012] 51029.100000 total counts/ 10830.700000 bgd. counts: snr = 386.260683
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.212208 pixels
  Position = (259.3, 297.4) = 22 48 40.92 -51 9 53.2
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 40198.4 +/- 225.9
  Background counts = 10830.7
  Rate = 0.6 +/- 0.004
[Sat Mar  3 17:00:31 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 17:00:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 17:00:31 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 17:00:31 2012] Source does appear to be extended
[Sat Mar  3 17:00:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 17:04:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar  3 17:04:14 2012] Initial guess for spatial extent in simple fitting = 5.49"
[Sat Mar  3 17:04:14 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.725
[Sat Mar  3 17:04:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.49"
[Sat Mar  3 17:18:57 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar  3 17:18:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0510380101_pi300-10000_cl_pass1_src1.csv
[Sat Mar  3 17:18:57 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar  3 17:18:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0510380101_pi300-10000_cl_pass1_src1.csv
[Sat Mar  3 17:18:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510380101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510380101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 17:18:57 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar  3 17:18:57 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar  3 17:18:57 2012] Fit fullrun_mos1_xmm0510380101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar  3 17:37:04 2012] Spatial fit model total counts = 50862.000000, observed total counts = 50826.000000
[Sat Mar  3 17:37:04 2012] Offset between fit and detection position for source 3 = 0.000393 pixels
[Sat Mar  3 17:37:04 2012] 51036.300000 total counts/ 10857.700000 bgd. counts: snr = 385.590105
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000393 pixels
  Position = (259.3, 297.4) = 22 48 40.92 -51 9 53.2
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 40178.6 +/- 225.9
  Background counts = 10857.7
  Rate = 0.6 +/- 0.004
[Sat Mar  3 17:37:04 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 17:37:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 17:37:04 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 17:37:04 2012] Source does appear to be extended
[Sat Mar  3 17:37:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 18:52:42 2012] Counts = 40178.600000, rescaling region sizes by 3.000000
[Sat Mar  3 18:52:42 2012] XMMSAS src. selection expression = ellipse(22514.241200, 25822.941000, 986.553028, 986.553028, 0.000000, X, Y)
[Sat Mar  3 18:52:42 2012] Writing source region out to fullrun_mos1_xmm0510380101_pi300-10000_pass1_cl_src3_src.reg
[Sat Mar  3 18:52:42 2012] Extracting stamp from image fullrun_mos1_xmm0510380101_pi300-10000_cl_sm2.00.img.gz, (203, 241) - (316, 354)
[Sat Mar  3 18:52:42 2012] XMMSAS bgd. selection expression = annulus(22514.241200, 25822.941000, 4932.765142, 9865.530284, X, Y) && !ellipse(32505.128300, 25361.427800, 516.193615, 516.193615, 0.000000, X, Y) && !ellipse(23011.390564, 24912.564117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24665.468506, 28200.525848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17003.011475, 30217.748077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22922.213440, 17976.904099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24977.091949, 21461.081787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12558.269409, 19018.741577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17378.424652, 26567.887268, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar  3 18:52:42 2012] Writing fullrun_mos1_xmm0510380101_pi300-10000_pass1_cl_src3.gif
[Sat Mar  3 18:52:48 2012] Mean detx,y = (286.05, 1576.88) 
[Sat Mar  3 18:52:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar  3 18:54:26 2012] Binned source spectrum to 10 counts/bin
[Sat Mar  3 18:54:26 2012] Setting source spectrum file to fullrun_mos1_xmm0510380101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar  3 18:54:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510380101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Mar  3 19:38:24 2012] Updating aperture counts using extracted products
[Sat Mar  3 19:38:24 2012] Error reading totcts from fullrun_mos1_xmm0510380101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar  3 19:38:24 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar  3 19:38:24 2012] Using photon index=1.80, rate=0.636, arf fullrun_mos1_xmm0510380101_pi300-10000_pass1_cl_src3.arf
[Sat Mar  3 19:38:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar  3 19:38:24 2012] Updating source flux to 6e-12
[Sat Mar  3 19:38:54 2012] Reading fit data from xmm0510380101/analysis//spectral/fullrun_mos1_xmm0510380101_pi300-10000_pass1_cl_src3_pl.csv
[Sat Mar  3 19:38:54 2012] Spectral fit parameter nH value = 1.11203e+12
[Sat Mar  3 19:38:54 2012] Spectral fit parameter PhoIndex value = 2.0503
[Sat Mar  3 19:38:54 2012] Failed to get F(0.3-8.0) from xmm0510380101/analysis//spectral/fullrun_mos1_xmm0510380101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Mar  3 19:38:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar  3 19:38:54 2012] Using Nh = 1.1e+12, photon index=2.05, rate=0.636, arf fullrun_mos1_xmm0510380101_pi300-10000_pass1_cl_src3.arf
[Sat Mar  3 19:38:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar  3 19:38:54 2012] Updating source flux to 5.4e-12