[Sat Mar 3 15:02:43 2012] Detection parameters: Position = (201.8, 148.3) = 22 49 7.72 -51 20 41.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 116.9 +/- 16.4 Background counts = 41.0 Rate = 0.002 +/- 0.0003 [Sat Mar 3 15:02:43 2012] Off-axis axis estimate = 12.95' [Sat Mar 3 15:42:02 2012] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting [Sat Mar 3 15:42:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Mar 3 15:42:02 2012] Initial guess for spatial extent in simple fitting = 12.90" [Sat Mar 3 15:42:02 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.020 [Sat Mar 3 15:42:02 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.90" [Sat Mar 3 16:02:12 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src13.ximg exists [Sat Mar 3 16:02:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src13.csv [Sat Mar 3 16:02:12 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src13_1.ximg exists [Sat Mar 3 16:02:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src13.csv [Sat Mar 3 16:02:12 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Mar 3 16:02:12 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Sat Mar 3 16:02:12 2012] fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Sat Mar 3 16:02:12 2012] Fit fullrun_mos1_xmm0510380101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Sat Mar 3 17:00:31 2012] Spatial fit model total counts = 599.577000, observed total counts = 598.000000 [Sat Mar 3 17:00:31 2012] Offset between fit and detection position for source 14 = 0.213089 pixels [Sat Mar 3 17:00:31 2012] 583.030900 total counts/ 506.643000 bgd. counts: snr = 3.393701 Spatial fit parameters: Offset between fit and detection position for source 14 = 0.213089 pixels Position = (201.6, 148.4) = 22 49 7.80 -51 20 40.8 Extent = 5.8 (4.3-7.6)", rotation angle = 0 Source counts = 76.4 +/- 24.1 Background counts = 506.6 Rate = 0.001 +/- 0.0004 [Sat Mar 3 17:00:31 2012] Vigneting correction estimate = 1.000000 [Sat Mar 3 17:00:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Mar 3 17:00:31 2012] Assessing source extent using major axis lower bound [Sat Mar 3 17:00:31 2012] Source does appear to be extended [Sat Mar 3 17:00:31 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Mar 3 17:00:31 2012] Deleting source due to low Poisson probability 0.9