[Wed Aug 22 11:15:28 2012] Detection parameters:
  Position = (443.7, 272.0) = 2 29 30.79 -71 21 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.6 +/- 20.7
  Background counts = 158.4
  Rate = 0.002 +/- 0.0002

[Wed Aug 22 11:15:29 2012] Off-axis axis estimate = 10.71'
[Wed Aug 22 11:23:20 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 11:23:20 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Wed Aug 22 11:23:20 2012] source mask rpix=2.7, npix_max = 41, mask sum = 28, frac = 0.680
[Wed Aug 22 11:23:20 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 11.78"
[Wed Aug 22 13:48:27 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src51.ximg exists
[Wed Aug 22 13:48:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src51.csv
[Wed Aug 22 13:48:27 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src51_1.ximg exists
[Wed Aug 22 13:48:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src51.csv
[Wed Aug 22 13:48:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 13:48:29 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Wed Aug 22 13:48:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Aug 22 13:48:29 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Aug 22 13:48:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Aug 22 13:48:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 17:02:09 2012] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 11.654249 pixels away
[Wed Aug 22 17:02:09 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 17:02:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 17:02:09 2012] Assessing source extent using major
[Wed Aug 22 17:02:09 2012] Source does appear to be extended
[Wed Aug 22 17:02:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 17:02:09 2012] Source is confused with source 50
[Wed Aug 22 17:02:48 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 17:02:48 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Wed Aug 22 17:02:48 2012] source mask rpix=2.7, npix_max = 41, mask sum = 28, frac = 0.680
[Wed Aug 22 17:02:48 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 11.78"
[Wed Aug 22 21:01:53 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src50.ximg exists
[Wed Aug 22 21:01:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src50.csv
[Wed Aug 22 21:01:53 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src50_1.ximg exists
[Wed Aug 22 21:01:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src50.csv
[Wed Aug 22 21:01:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 21:01:54 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Wed Aug 22 21:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src50.csv
[Wed Aug 22 21:01:54 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Wed Aug 22 21:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src50.csv
[Wed Aug 22 21:01:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 22:43:28 2012] Spatial fit model total counts = 1304.000000, observed total counts = 1262.000000
[Wed Aug 22 22:43:28 2012] Offset between fit and detection position for source 53 = 8.253697 pixels
[Wed Aug 22 22:43:28 2012] Warning, changing simple spatial fit ID from 50 to 47
[Wed Aug 22 22:43:28 2012] 1252.663000 total counts/ 934.858000 bgd. counts: snr = 10.394124
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 8.253697 pixels
  Position = (435.7, 273.8) = 2 29 38.11 -71 21 12.4
  Extent = 45.6" x 5.7", rotation angle = 14
  Source counts = 317.8 +/- 35.4
  Background counts = 934.9
  Rate = 0.007 +/- 0.0007
[Wed Aug 22 22:43:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 22:43:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 22:43:28 2012] Assessing source extent using major
[Wed Aug 22 22:43:28 2012] Source does appear to be extended
[Wed Aug 22 22:43:28 2012] Computing asymmetry using major and minor axis, asym = 8.00
[Wed Aug 22 22:43:28 2012] Source is asymmetric
[Wed Aug 22 22:43:53 2012] XMMSAS src. selection expression = ellipse(37856.613569, 23775.309188, 2734.236079, 341.779210, 14.116118, X, Y)
[Wed Aug 22 22:43:53 2012] Writing source region out to fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src53_src.reg
[Wed Aug 22 22:43:53 2012] Extracting stamp from image fullrun_pn_xmm0510181701_pi300-10000_cl_sm2.00.img.gz, (279, 117) - (593, 431)
[Wed Aug 22 22:43:53 2012] XMMSAS bgd. selection expression = annulus(37856.613569, 23775.309188, 4557.060131, 9114.120262, X, Y) && !ellipse(33658.646800, 16481.979000, 628.136818, 330.971210, 328.148784, X, Y) && !ellipse(29725.970000, 27740.532600, 427.112812, 427.112812, 0.000000, X, Y) && !ellipse(32749.890326, 26934.676200, 435.458413, 435.458413, 0.000000, X, Y) && !ellipse(27743.757600, 26626.009400, 1152.920033, 376.936811, 17.877700, X, Y) && !ellipse(29667.951600, 26670.328000, 394.282411, 394.282411, 0.000000, X, Y) && !ellipse(28121.703985, 26526.698762, 1453.096042, 365.364193, 196.786209, X, Y) && !ellipse(28734.603951, 26371.422852, 1227.064035, 454.789903, 195.739997, X, Y) && !ellipse(29850.791168, 26046.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30357.218000, 25758.160000, 1291.072037, 1291.072037, 0.000000, X, Y) && !ellipse(31026.066000, 24950.008000, 2582.144074, 2582.144074, 0.000000, X, Y) && !ellipse(32159.626000, 25392.032731, 1080.256031, 583.299393, 0.000000, X, Y) && !ellipse(33846.174000, 24911.418600, 3116.592090, 429.328812, 195.681000, X, Y) && !ellipse(32667.702000, 25298.603800, 1517.120044, 1517.120044, 0.000000, X, Y) && !ellipse(35122.941254, 24569.850281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34110.548000, 24764.790000, 1558.296045, 1558.296045, 0.000000, X, Y) && !ellipse(35469.702000, 24468.974200, 1718.944049, 1718.944049, 0.000000, X, Y) && !ellipse(36040.384000, 24775.822000, 1772.656051, 1772.656051, 0.000000, X, Y) && !ellipse(30937.392620, 24262.542400, 345.383210, 345.383210, 0.000000, X, Y) && !ellipse(36430.807049, 24166.623227, 1774.848051, 341.854032, 19.045489, X, Y) && !ellipse(36900.718000, 24033.556600, 3645.648105, 455.705613, 16.061900, X, Y) && !ellipse(38021.374802, 23736.963092, 1774.848051, 378.255386, 14.910623, X, Y) && !ellipse(37177.078000, 23962.105200, 1822.824052, 1822.824052, 0.000000, X, Y) && !ellipse(29227.005310, 18481.907928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34133.780884, 17954.611145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29357.861084, 17808.174332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36348.404541, 17057.674545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29225.196200, 14725.033800, 1064.192031, 309.568809, 339.950346, X, Y) && !ellipse(35443.936951, 14534.829865, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 22:43:53 2012] Writing fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src53.gif
[Wed Aug 22 23:45:02 2012] Mean detx,y = (-70.77, 13155.47) 
[Wed Aug 22 23:45:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 23:47:50 2012] grppha failed
[Wed Aug 22 23:47:50 2012] Setting source spectrum file to fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src53_src.pi.gz
[Wed Aug 22 23:47:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Thu Aug 23 00:38:46 2012] Updating aperture counts using extracted products
[Thu Aug 23 00:38:46 2012] Error reading totcts from fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src53_src.pi.gz
[Thu Aug 23 00:38:46 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 00:38:52 2012] Flag c found in src. 53 procflags, skipping spectral fitting
[Thu Aug 23 00:38:52 2012] Source 53 has no response, skipping
[Thu Aug 23 00:38:53 2012] xmm0510181701/analysis//spectral/fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete