[Wed Aug 22 11:15:24 2012] Detection parameters:
  Position = (284.2, 317.0) = 2 31 55.43 -71 18 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95216.3 +/- 365.3
  Background counts = 220.0
  Rate = 1 +/- 0.005

[Wed Aug 22 11:15:29 2012] Off-axis axis estimate = 1.69'
[Wed Aug 22 11:23:20 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 11:23:20 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Aug 22 11:23:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Wed Aug 22 11:23:20 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.27"
[Wed Aug 22 13:48:26 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src5.ximg exists
[Wed Aug 22 13:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src5.csv
[Wed Aug 22 13:48:26 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Aug 22 13:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src5.csv
[Wed Aug 22 13:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 13:48:28 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Aug 22 13:48:28 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Aug 22 13:48:28 2012] Fit fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Aug 22 17:02:08 2012] Spatial fit model total counts = 61987.000000, observed total counts = 61681.000000
[Wed Aug 22 17:02:08 2012] Offset between fit and detection position for source 5 = 0.062632 pixels
[Wed Aug 22 17:02:08 2012] 62293.300000 total counts/ 13073.000000 bgd. counts: snr = 430.483615
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.062632 pixels
  Position = (284.2, 316.9) = 2 31 55.44 -71 18 7.7
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 49220.3 +/- 249.6
  Background counts = 13073.0
  Rate = 1 +/- 0.005
[Wed Aug 22 17:02:09 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 17:02:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 17:02:09 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 17:02:09 2012] Source does appear to be extended
[Wed Aug 22 17:02:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 17:02:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 17:02:48 2012] Initial guess for spatial extent in simple fitting = 5.88"
[Wed Aug 22 17:02:48 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.167
[Wed Aug 22 17:02:48 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.88"
[Wed Aug 22 21:01:52 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src5.ximg exists
[Wed Aug 22 21:01:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src5.csv
[Wed Aug 22 21:01:52 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Aug 22 21:01:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src5.csv
[Wed Aug 22 21:01:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 21:01:53 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Aug 22 21:01:53 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Aug 22 21:01:53 2012] Fit fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Aug 22 22:43:27 2012] Spatial fit model total counts = 61976.600000, observed total counts = 61681.000000
[Wed Aug 22 22:43:27 2012] Offset between fit and detection position for source 5 = 0.000304 pixels
[Wed Aug 22 22:43:27 2012] 62282.400000 total counts/ 13063.700000 bgd. counts: snr = 430.622819
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000304 pixels
  Position = (284.2, 316.9) = 2 31 55.44 -71 18 7.7
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 49218.7 +/- 249.6
  Background counts = 13063.7
  Rate = 1 +/- 0.005
[Wed Aug 22 22:43:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 22:43:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 22:43:28 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 22:43:28 2012] Source does appear to be extended
[Wed Aug 22 22:43:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 22:43:52 2012] Counts = 49218.700000, rescaling region sizes by 3.000000
[Wed Aug 22 22:43:52 2012] XMMSAS src. selection expression = ellipse(24680.457200, 27521.018520, 1058.803230, 1058.803230, 0.000000, X, Y)
[Wed Aug 22 22:43:52 2012] Writing source region out to fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src5_src.reg
[Wed Aug 22 22:43:52 2012] Extracting stamp from image fullrun_pn_xmm0510181701_pi300-10000_cl_sm2.00.img.gz, (223, 256) - (345, 378)
[Wed Aug 22 22:43:52 2012] XMMSAS bgd. selection expression = annulus(24680.457200, 27521.018520, 5294.016152, 10588.032305, X, Y) && !ellipse(21810.473022, 24796.247284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22455.400879, 22177.970230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27682.299600, 21451.983400, 400.463212, 400.463212, 0.000000, X, Y) && !ellipse(33658.646800, 16481.979000, 628.136818, 330.971210, 328.148784, X, Y) && !ellipse(29725.970000, 27740.532600, 427.112812, 427.112812, 0.000000, X, Y) && !ellipse(20253.267000, 27830.781800, 417.100012, 417.100012, 0.000000, X, Y) && !ellipse(20111.684387, 38561.265259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36095.921875, 37703.858063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30095.983124, 37145.603638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34042.320435, 35964.572266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14753.649414, 34758.180054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19923.059158, 32369.482056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13577.316116, 30663.668213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18129.305435, 30231.726807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20592.725200, 30268.453800, 429.312012, 429.312012, 0.000000, X, Y) && !ellipse(18223.485962, 29415.435394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16069.923996, 28973.524353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27142.431800, 28214.562000, 488.272814, 324.087209, 343.267900, X, Y) && !ellipse(23581.420044, 27655.915619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20925.272220, 27768.149200, 347.107210, 347.107210, 0.000000, X, Y) && !ellipse(23586.586731, 27192.464325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32749.890326, 26934.676200, 435.458413, 435.458413, 0.000000, X, Y) && !ellipse(21442.225248, 26919.527600, 427.560012, 306.010409, 90.000000, X, Y) && !ellipse(27063.221746, 26844.967888, 1152.920033, 288.792324, 19.318765, X, Y) && !ellipse(27743.757600, 26626.009400, 1152.920033, 376.936811, 17.877700, X, Y) && !ellipse(29667.951600, 26670.328000, 394.282411, 394.282411, 0.000000, X, Y) && !ellipse(28121.703985, 26526.698762, 1453.096042, 365.364193, 196.786209, X, Y) && !ellipse(28734.603951, 26371.422852, 1227.064035, 454.789903, 195.739997, X, Y) && !ellipse(29850.791168, 26046.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30357.218000, 25758.160000, 1291.072037, 1291.072037, 0.000000, X, Y) && !ellipse(31026.066000, 24950.008000, 2582.144074, 2582.144074, 0.000000, X, Y) && !ellipse(32159.626000, 25392.032731, 1080.256031, 583.299393, 0.000000, X, Y) && !ellipse(26371.126600, 25294.797400, 394.386411, 394.386411, 0.000000, X, Y) && !ellipse(33846.174000, 24911.418600, 3116.592090, 429.328812, 195.681000, X, Y) && !ellipse(32667.702000, 25298.603800, 1517.120044, 1517.120044, 0.000000, X, Y) && !ellipse(35122.941254, 24569.850281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34110.548000, 24764.790000, 1558.296045, 1558.296045, 0.000000, X, Y) && !ellipse(35469.702000, 24468.974200, 1718.944049, 1718.944049, 0.000000, X, Y) && !ellipse(36040.384000, 24775.822000, 1772.656051, 1772.656051, 0.000000, X, Y) && !ellipse(30937.392620, 24262.542400, 345.383210, 345.383210, 0.000000, X, Y) && !ellipse(36430.807049, 24166.623227, 1774.848051, 341.854032, 19.045489, X, Y) && !ellipse(26086.710999, 24224.218567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36900.718000, 24033.556600, 3645.648105, 455.705613, 16.061900, X, Y) && !ellipse(17597.087555, 23852.702972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37856.613569, 23775.309188, 3645.648105, 455.705613, 14.116118, X, Y) && !ellipse(25098.394620, 20498.377200, 432.188355, 432.188355, 0.000000, X, Y) && !ellipse(27602.253220, 19352.431000, 392.020011, 392.020011, 0.000000, X, Y) && !ellipse(29227.005310, 18481.907928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34133.780884, 17954.611145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29357.861084, 17808.174332, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 22:43:52 2012] Writing fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src5.gif
[Wed Aug 22 22:52:21 2012] Mean detx,y = (146.02, -145.57) 
[Wed Aug 22 22:52:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 22:56:16 2012] grppha failed
[Wed Aug 22 22:56:16 2012] Setting source spectrum file to fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src5_src.pi.gz
[Wed Aug 22 22:56:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Aug 23 00:38:45 2012] Updating aperture counts using extracted products
[Thu Aug 23 00:38:45 2012] Error reading totcts from fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src5_src.pi.gz
[Thu Aug 23 00:38:46 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 00:38:52 2012] Source 5 has no response, skipping
[Thu Aug 23 00:38:53 2012] xmm0510181701/analysis//spectral/fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete