[Wed Aug 22 11:15:24 2012] Detection parameters:
  Position = (387.6, 190.1) = 2 30 21.30 -71 27 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4012.0 +/- 76.1
  Background counts = 169.4
  Rate = 0.05 +/- 0.0009

[Wed Aug 22 11:15:29 2012] Off-axis axis estimate = 10.17'
[Wed Aug 22 11:23:20 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 11:23:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 22 11:23:20 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Wed Aug 22 11:23:20 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.060
[Wed Aug 22 11:23:20 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.52"
[Wed Aug 22 13:48:26 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src4.ximg exists
[Wed Aug 22 13:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src4.csv
[Wed Aug 22 13:48:26 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Aug 22 13:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src4.csv
[Wed Aug 22 13:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 13:48:28 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Aug 22 13:48:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Aug 22 13:48:28 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Aug 22 13:48:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Aug 22 13:48:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 17:02:08 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.909736 pixels away
[Wed Aug 22 17:02:09 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 17:02:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 17:02:09 2012] Assessing source extent using major
[Wed Aug 22 17:02:09 2012] Source does appear to be extended
[Wed Aug 22 17:02:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 17:02:48 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 17:02:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 22 17:02:48 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Wed Aug 22 17:02:48 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.060
[Wed Aug 22 17:02:48 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.52"
[Wed Aug 22 21:01:52 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src4.ximg exists
[Wed Aug 22 21:01:52 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Aug 22 21:01:52 2012] Fit fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Aug 22 21:01:53 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Aug 22 21:01:53 2012] fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Aug 22 21:01:53 2012] Fit fullrun_pn_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Aug 22 22:43:27 2012] Spatial fit model total counts = 3665.360000, observed total counts = 3431.000000
[Wed Aug 22 22:43:27 2012] Offset between fit and detection position for source 4 = 0.171167 pixels
[Wed Aug 22 22:43:27 2012] 3649.300000 total counts/ 1348.720000 bgd. counts: snr = 62.643562
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.171167 pixels
  Position = (387.4, 190.0) = 2 30 21.45 -71 27 18.6
  Extent = 7.9 (7.5-8.2)" x 4.1 (3.9-4.4)", rotation angle = 328 (325-331) degrees
  Source counts = 2300.6 +/- 60.4
  Background counts = 1348.7
  Rate = 0.05 +/- 0.001
[Wed Aug 22 22:43:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 22:43:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 22:43:28 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 22:43:28 2012] Source does appear to be extended
[Wed Aug 22 22:43:28 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.72
[Wed Aug 22 22:43:28 2012] Source is asymmetric
[Wed Aug 22 22:43:52 2012] Counts = 2300.580000, rescaling region sizes by 2.000000
[Wed Aug 22 22:43:52 2012] XMMSAS src. selection expression = ellipse(33658.646800, 16481.979000, 942.205227, 496.456814, 328.148784, X, Y)
[Wed Aug 22 22:43:52 2012] Writing source region out to fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug 22 22:43:52 2012] Extracting stamp from image fullrun_pn_xmm0510181701_pi300-10000_cl_sm2.00.img.gz, (333, 136) - (442, 244)
[Wed Aug 22 22:43:52 2012] XMMSAS bgd. selection expression = annulus(33658.646800, 16481.979000, 3140.684090, 6281.368181, X, Y) && !ellipse(27682.299600, 21451.983400, 400.463212, 400.463212, 0.000000, X, Y) && !ellipse(31026.066000, 24950.008000, 2582.144074, 2582.144074, 0.000000, X, Y) && !ellipse(33846.174000, 24911.418600, 3116.592090, 429.328812, 195.681000, X, Y) && !ellipse(35469.702000, 24468.974200, 1718.944049, 1718.944049, 0.000000, X, Y) && !ellipse(36430.807049, 24166.623227, 1774.848051, 341.854032, 19.045489, X, Y) && !ellipse(36900.718000, 24033.556600, 3645.648105, 455.705613, 16.061900, X, Y) && !ellipse(38021.374802, 23736.963092, 1774.848051, 378.255386, 14.910623, X, Y) && !ellipse(37177.078000, 23962.105200, 1822.824052, 1822.824052, 0.000000, X, Y) && !ellipse(37856.613569, 23775.309188, 3645.648105, 455.705613, 14.116118, X, Y) && !ellipse(27602.253220, 19352.431000, 392.020011, 392.020011, 0.000000, X, Y) && !ellipse(29227.005310, 18481.907928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34133.780884, 17954.611145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29357.861084, 17808.174332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36348.404541, 17057.674545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29225.196200, 14725.033800, 1064.192031, 309.568809, 339.950346, X, Y) && !ellipse(35443.936951, 14534.829865, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 22:43:52 2012] Writing fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src4.gif
[Wed Aug 22 22:49:59 2012] Mean detx,y = (-8038.14, 11500.07) 
[Wed Aug 22 22:50:03 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 22:51:42 2012] grppha failed
[Wed Aug 22 22:51:43 2012] Setting source spectrum file to fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src4_src.pi.gz
[Wed Aug 22 22:51:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Aug 23 00:38:45 2012] Updating aperture counts using extracted products
[Thu Aug 23 00:38:45 2012] Error reading totcts from fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src4_src.pi.gz
[Thu Aug 23 00:38:46 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 00:38:52 2012] Source 4 has no response, skipping
[Thu Aug 23 00:38:53 2012] xmm0510181701/analysis//spectral/fullrun_pn_xmm0510181701_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete