[Wed Aug 22 11:16:50 2012] Detection parameters:
  Position = (290.1, 326.6) = 2 31 50.12 -71 17 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.8 +/- 23.2
  Background counts = 156.6
  Rate = 0.001 +/- 0.0003

[Wed Aug 22 11:16:51 2012] Off-axis axis estimate = 2.13'
[Wed Aug 22 14:38:58 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 14:38:58 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Wed Aug 22 14:38:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.911
[Wed Aug 22 14:38:58 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.49"
[Wed Aug 22 17:01:54 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src30.ximg exists
[Wed Aug 22 17:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src30.csv
[Wed Aug 22 17:01:54 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Aug 22 17:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src30.csv
[Wed Aug 22 17:01:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 17:01:54 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Aug 22 17:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed Aug 22 17:01:54 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Aug 22 17:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed Aug 22 17:01:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 17:02:22 2012] Source 26 is offset by 3.918555 and 8.373144 pixels which is larger than
2 X fitted extent = 2.503517 x 2.503517, not incorporating fit results
[Wed Aug 22 17:02:22 2012] Warning, spatial fit 30 centroid is now closest to src. 27
[Wed Aug 22 17:02:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 17:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 17:02:22 2012] Assessing source extent using major
[Wed Aug 22 17:02:22 2012] Source does appear to be extended
[Wed Aug 22 17:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 17:02:22 2012] Source is confused with source 27
[Wed Aug 22 21:46:46 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 21:46:46 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Wed Aug 22 21:46:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.911
[Wed Aug 22 21:46:46 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 7.49"
[Wed Aug 22 22:43:07 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_src26.ximg exists
[Wed Aug 22 22:43:07 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Aug 22 22:43:07 2012] Fit fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_src26 appears to have run properly
[Wed Aug 22 22:43:08 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Aug 22 22:43:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Aug 22 22:43:08 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Aug 22 22:43:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Aug 22 22:43:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 22:43:38 2012] Source 26 is offset by 3.918555 and 8.373144 pixels which is larger than
2 X fitted extent = 2.197894 x 2.197894, not incorporating fit results
[Wed Aug 22 22:43:38 2012] Source 26 is offset by 0.907536 and -6.790971 pixels which is larger than
2 X fitted extent = 6.747862 x 2.703260, not incorporating fit results
[Wed Aug 22 22:43:38 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 22:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 22:43:38 2012] Assessing source extent using major
[Wed Aug 22 22:43:38 2012] Source does appear to be extended
[Wed Aug 22 22:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 00:20:12 2012] XMMSAS src. selection expression = ellipse(25191.634247, 28363.183563, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 23 00:20:12 2012] Writing source region out to fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src26_src.reg
[Thu Aug 23 00:20:12 2012] Extracting stamp from image fullrun_mos2_xmm0510181701_pi300-10000_cl_sm2.00.img.gz, (253, 289) - (328, 364)
[Thu Aug 23 00:20:12 2012] XMMSAS bgd. selection expression = annulus(25191.634247, 28363.183563, 1087.500000, 2175.000000, X, Y) && !ellipse(24675.502040, 27507.723400, 1225.802435, 1225.802435, 0.000000, X, Y) && !ellipse(25507.588043, 28204.237579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27141.260600, 28192.536400, 529.412815, 529.412815, 0.000000, X, Y) && !ellipse(25915.589050, 28149.721863, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 23 00:20:12 2012] Writing fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src26.gif
[Thu Aug 23 00:34:28 2012] Mean detx,y = (-756.99, -206.88) 
[Thu Aug 23 00:34:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 00:34:38 2012] grppha failed
[Thu Aug 23 00:34:38 2012] Setting source spectrum file to fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src26_src.pi.gz
[Thu Aug 23 00:34:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Aug 23 00:36:22 2012] Not generating rmf since there are only 96 counts
[Thu Aug 23 00:36:22 2012] rmf not generated due to insufficient counts
[Thu Aug 23 00:38:48 2012] Updating aperture counts using extracted products
[Thu Aug 23 00:38:48 2012] Error reading totcts from fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src26_src.pi.gz
[Thu Aug 23 00:38:48 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 00:38:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 23 00:38:52 2012] xmm0510181701/analysis//spectral/fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete