[Wed Aug 22 11:16:50 2012] Detection parameters:
  Position = (241.0, 319.8) = 2 32 34.58 -71 17 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 274.0 +/- 26.6
  Background counts = 161.8
  Rate = 0.004 +/- 0.0003

[Wed Aug 22 11:16:51 2012] Off-axis axis estimate = 4.45'
[Wed Aug 22 14:38:58 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 14:38:58 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Wed Aug 22 14:38:58 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.009
[Wed Aug 22 14:38:58 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.65"
[Wed Aug 22 17:01:53 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src13.ximg exists
[Wed Aug 22 17:01:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src13.csv
[Wed Aug 22 17:01:53 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Aug 22 17:01:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src13.csv
[Wed Aug 22 17:01:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 17:01:54 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Aug 22 17:01:54 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Aug 22 17:01:54 2012] Fit fullrun_mos2_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Aug 22 17:02:22 2012] Source 16 is offset by -0.094220 and 2.205718 pixels which is larger than
2 X fitted extent = 1.013076 x 1.013076, not incorporating fit results
[Wed Aug 22 17:02:22 2012] Spatial fit model total counts = 1288.540000, observed total counts = 1289.000000
[Wed Aug 22 17:02:22 2012] Offset between fit and detection position for source 16 = 0.147215 pixels
[Wed Aug 22 17:02:22 2012] 1013.204000 total counts/ 891.503000 bgd. counts: snr = 4.075987
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.147215 pixels
  Position = (241.0, 319.7) = 2 32 34.59 -71 17 55.1
  Extent = 4.4 (3.1-5.9)", rotation angle = 0
  Source counts = 121.7 +/- 31.8
  Background counts = 891.5
  Rate = 0.002 +/- 0.0005
[Wed Aug 22 17:02:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 17:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 17:02:22 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 17:02:22 2012] Source does appear to be extended
[Wed Aug 22 17:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 21:46:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 21:46:46 2012] Initial guess for spatial extent in simple fitting = 4.43"
[Wed Aug 22 21:46:46 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.975
[Wed Aug 22 21:46:46 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 4.43"
[Wed Aug 22 22:43:07 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_src13.ximg exists
[Wed Aug 22 22:43:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_src13.csv
[Wed Aug 22 22:43:07 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Aug 22 22:43:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_src13.csv
[Wed Aug 22 22:43:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 22:43:08 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Aug 22 22:43:08 2012] fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Aug 22 22:43:08 2012] Fit fullrun_mos2_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Aug 22 22:43:38 2012] Spatial fit model total counts = 1217.040000, observed total counts = 1221.000000
[Wed Aug 22 22:43:38 2012] Offset between fit and detection position for source 16 = 0.011877 pixels
[Wed Aug 22 22:43:38 2012] 1067.566000 total counts/ 951.707000 bgd. counts: snr = 3.755590
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.011877 pixels
  Position = (241.0, 319.7) = 2 32 34.58 -71 17 55.1
  Extent = 4.3 (2.9-5.7)", rotation angle = 0
  Source counts = 115.9 +/- 32.7
  Background counts = 951.7
  Rate = 0.002 +/- 0.0005
[Wed Aug 22 22:43:38 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 22:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 22:43:38 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 22:43:38 2012] Source does appear to be extended
[Wed Aug 22 22:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 00:20:12 2012] XMMSAS src. selection expression = ellipse(20915.659460, 27764.120000, 257.846407, 257.846407, 0.000000, X, Y)
[Thu Aug 23 00:20:12 2012] Writing source region out to fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src16_src.reg
[Thu Aug 23 00:20:12 2012] Extracting stamp from image fullrun_mos2_xmm0510181701_pi300-10000_cl_sm2.00.img.gz, (226, 305) - (256, 335)
[Thu Aug 23 00:20:12 2012] XMMSAS bgd. selection expression = annulus(20915.659460, 27764.120000, 429.744012, 859.488025, X, Y) && !ellipse(20234.449680, 27821.828800, 379.155211, 379.155211, 0.000000, X, Y) && !ellipse(21439.844916, 26920.637600, 380.782411, 380.782411, 0.000000, X, Y) && !ellipse(19415.405609, 28666.297638, 1740.000000, 1740.000000, 0.000000, X, Y)
[Thu Aug 23 00:20:12 2012] Writing fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src16.gif
[Thu Aug 23 00:29:38 2012] Mean detx,y = (838.84, 3690.29) 
[Thu Aug 23 00:29:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 00:29:47 2012] grppha failed
[Thu Aug 23 00:29:47 2012] Setting source spectrum file to fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src16_src.pi.gz
[Thu Aug 23 00:29:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Aug 23 00:38:47 2012] Updating aperture counts using extracted products
[Thu Aug 23 00:38:47 2012] Error reading totcts from fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src16_src.pi.gz
[Thu Aug 23 00:38:48 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 00:38:51 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Thu Aug 23 00:38:51 2012] Source 16 has no response, skipping
[Thu Aug 23 00:38:52 2012] xmm0510181701/analysis//spectral/fullrun_mos2_xmm0510181701_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete