[Wed Aug 22 11:16:07 2012] Detection parameters:
  Position = (119.3, 330.1) = 2 34 24.53 -71 17 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 323.6 +/- 26.9
  Background counts = 90.9
  Rate = 0.004 +/- 0.0003

[Wed Aug 22 11:16:09 2012] Off-axis axis estimate = 13.19'
[Wed Aug 22 13:48:29 2012] Using EEF radius (= 13.02 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 13:48:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 22 13:48:29 2012] Initial guess for spatial extent in simple fitting = 13.02"
[Wed Aug 22 13:48:29 2012] source mask rpix=3.0, npix_max = 48, mask sum = 45, frac = 0.922
[Wed Aug 22 13:48:29 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.02"
[Wed Aug 22 14:38:57 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src10.ximg exists
[Wed Aug 22 14:38:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src10.csv
[Wed Aug 22 14:38:57 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Aug 22 14:38:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src10.csv
[Wed Aug 22 14:38:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 14:38:57 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Aug 22 14:38:57 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Aug 22 14:38:57 2012] Fit fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Aug 22 17:02:14 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.278772 pixels away
[Wed Aug 22 17:02:14 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 17:02:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 17:02:14 2012] Assessing source extent using major
[Wed Aug 22 17:02:14 2012] Source does appear to be extended
[Wed Aug 22 17:02:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 21:01:54 2012] Using EEF radius (= 13.02 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 21:01:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 22 21:01:54 2012] Initial guess for spatial extent in simple fitting = 13.02"
[Wed Aug 22 21:01:54 2012] source mask rpix=3.0, npix_max = 48, mask sum = 45, frac = 0.922
[Wed Aug 22 21:01:54 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.02"
[Wed Aug 22 21:46:45 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src10.ximg exists
[Wed Aug 22 21:46:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src10.csv
[Wed Aug 22 21:46:45 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Aug 22 21:46:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src10.csv
[Wed Aug 22 21:46:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 21:46:46 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Aug 22 21:46:46 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Aug 22 21:46:46 2012] Fit fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Aug 22 22:43:33 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.387344 pixels away
[Wed Aug 22 22:43:33 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 22:43:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 22:43:33 2012] Assessing source extent using major
[Wed Aug 22 22:43:33 2012] Source does appear to be extended
[Wed Aug 22 22:43:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 00:03:40 2012] XMMSAS src. selection expression = ellipse(10327.813148, 28666.228607, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 23 00:03:40 2012] Writing source region out to fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src3_src.reg
[Thu Aug 23 00:03:40 2012] Extracting stamp from image fullrun_mos1_xmm0510181701_pi300-10000_cl_sm2.00.img.gz, (82, 293) - (157, 368)
[Thu Aug 23 00:03:40 2012] XMMSAS bgd. selection expression = annulus(10327.813148, 28666.228607, 1087.500000, 2175.000000, X, Y)
[Thu Aug 23 00:03:40 2012] Writing fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src3.gif
[Thu Aug 23 00:13:01 2012] Mean detx,y = (14310.29, -3045.97) 
[Thu Aug 23 00:13:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 00:13:12 2012] grppha failed
[Thu Aug 23 00:13:12 2012] Setting source spectrum file to fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src3_src.pi.gz
[Thu Aug 23 00:13:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Aug 23 00:20:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 23 00:20:09 2012] rmf not generated due to insufficient counts
[Thu Aug 23 00:38:46 2012] Updating aperture counts using extracted products
[Thu Aug 23 00:38:47 2012] Error reading totcts from fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src3_src.pi.gz
[Thu Aug 23 00:38:47 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 00:38:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 23 00:38:51 2012] xmm0510181701/analysis//spectral/fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete