[Wed Aug 22 11:16:07 2012] Detection parameters:
  Position = (284.4, 316.8) = 2 31 55.26 -71 18 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45216.3 +/- 252.5
  Background counts = 146.6
  Rate = 0.5 +/- 0.003

[Wed Aug 22 11:16:09 2012] Off-axis axis estimate = 1.68'
[Wed Aug 22 13:48:29 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 13:48:29 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Aug 22 13:48:29 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.061
[Wed Aug 22 13:48:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Aug 22 14:38:57 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 22 14:38:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 14:38:57 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 22 14:38:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 14:38:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 14:38:57 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 22 14:38:57 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 22 14:38:57 2012] Fit fullrun_mos1_xmm0510181701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 22 17:02:14 2012] Spatial fit model total counts = 35926.900000, observed total counts = 35927.000000
[Wed Aug 22 17:02:14 2012] Offset between fit and detection position for source 2 = 0.181400 pixels
[Wed Aug 22 17:02:14 2012] 35961.820000 total counts/ 8107.020000 bgd. counts: snr = 309.363749
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.181400 pixels
  Position = (284.3, 316.7) = 2 31 55.39 -71 18 8.4
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 27854.8 +/- 189.6
  Background counts = 8107.0
  Rate = 0.4 +/- 0.002
[Wed Aug 22 17:02:14 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 17:02:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 17:02:14 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 17:02:14 2012] Source does appear to be extended
[Wed Aug 22 17:02:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 21:01:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 21:01:54 2012] Initial guess for spatial extent in simple fitting = 5.46"
[Wed Aug 22 21:01:54 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.731
[Wed Aug 22 21:01:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.46"
[Wed Aug 22 21:46:45 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 22 21:46:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 21:46:45 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 22 21:46:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 21:46:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 21:46:46 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 22 21:46:46 2012] fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 22 21:46:46 2012] Fit fullrun_mos1_xmm0510181701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 22 22:43:33 2012] Spatial fit model total counts = 35922.700000, observed total counts = 35956.000000
[Wed Aug 22 22:43:33 2012] Offset between fit and detection position for source 2 = 0.012880 pixels
[Wed Aug 22 22:43:33 2012] 36096.810000 total counts/ 8218.510000 bgd. counts: snr = 307.517435
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.012880 pixels
  Position = (284.3, 316.7) = 2 31 55.39 -71 18 8.5
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 27878.3 +/- 190.0
  Background counts = 8218.5
  Rate = 0.4 +/- 0.002
[Wed Aug 22 22:43:33 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 22:43:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 22:43:33 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 22:43:33 2012] Source does appear to be extended
[Wed Aug 22 22:43:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 00:03:40 2012] Counts = 27878.300000, rescaling region sizes by 3.000000
[Thu Aug 23 00:03:40 2012] XMMSAS src. selection expression = ellipse(24685.585000, 27505.005800, 985.131028, 985.131028, 0.000000, X, Y)
[Thu Aug 23 00:03:40 2012] Writing source region out to fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src2_src.reg
[Thu Aug 23 00:03:40 2012] Extracting stamp from image fullrun_mos1_xmm0510181701_pi300-10000_cl_sm2.00.img.gz, (228, 260) - (341, 373)
[Thu Aug 23 00:03:40 2012] XMMSAS bgd. selection expression = annulus(24685.585000, 27505.005800, 4925.655142, 9851.310283, X, Y) && !ellipse(22462.372986, 22163.168442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27675.801788, 21443.728516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29727.661400, 27708.782800, 376.889611, 376.889611, 0.000000, X, Y) && !ellipse(20258.249969, 27809.049744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27597.887299, 19348.921021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17614.382416, 23820.885101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26393.787720, 25284.994000, 340.179662, 340.179662, 0.000000, X, Y) && !ellipse(29652.516235, 26667.586273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21445.153060, 26907.482800, 302.095209, 302.095209, 0.000000, X, Y) && !ellipse(18311.048828, 29370.884003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21801.003700, 24988.905700, 577.484817, 577.484817, 0.000000, X, Y) && !ellipse(27104.049380, 28177.467200, 395.767211, 395.767211, 0.000000, X, Y) && !ellipse(18182.147156, 29875.613037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26068.068400, 24229.947800, 380.675211, 380.675211, 0.000000, X, Y) && !ellipse(21720.698517, 28671.071381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14719.898682, 34798.663940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29287.749725, 17881.791656, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 23 00:03:40 2012] Writing fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src2.gif
[Thu Aug 23 00:03:52 2012] Mean detx,y = (215.60, -182.59) 
[Thu Aug 23 00:03:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 00:08:24 2012] grppha failed
[Thu Aug 23 00:08:24 2012] Setting source spectrum file to fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src2_src.pi.gz
[Thu Aug 23 00:08:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug 23 00:38:46 2012] Updating aperture counts using extracted products
[Thu Aug 23 00:38:46 2012] Error reading totcts from fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src2_src.pi.gz
[Thu Aug 23 00:38:47 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 00:38:50 2012] Source 2 has no response, skipping
[Thu Aug 23 00:38:51 2012] xmm0510181701/analysis//spectral/fullrun_mos1_xmm0510181701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete