Source List

Observation details report
Detailed source parameters (including errors) in a comma-separated values file

Click on source number for detailed analysis, including spectral fits if applicable

data idnum idradec telescope instrument x y cnts cntserr rate rateerr SNR poisprob sigmaj sigmin incang offax cnts_soft cnts_hard hr hr_err ext var N_H flux vign flags
Report 1 X122946.84+080002.8 xmm pn 267.245 366.145 279.359 23.8063 0.330827 0.0281923 0 10.875 10.875 0 5.40473 U U 1.53e+20 d
Report 1 X122946.96+080002.6 xmm mos2 266.859 365.553 327.154 22.7842 0.165925 0.0115556 0 10.875 10.875 0 5.37758 U U 1.53e+20 d
Report 4 X122947.15+080016.8 xmm mos2 266.199 371.087 106.529 16.7563 0.0576353 0.00906564 0 10.875 10.875 0 5.76243 U U 1.53e+20 d
Report 2 X122946.87+075916.8 xmm mos2 267.144 355.641 47.5166 10.7808 0.0222466 0.00504745 0 10.875 10.875 0 4.72729 U U 1.53e+20 d
Report 3 X122923.73+075359.8 xmm mos2 346.182 283.204 49.0999 10.5819 0.0206141 0.0044427 0 10.875 10.875 0 3.63343 U U 1.57e+20 d

counts and rate are bgd.-subtracted, based on simple spatial fitting (if done) or extracted counts from aperture otherwise (N.B., in either case aperture counts are given csv file).
cntserr, rateerr = Error on (source) counts and count rate, based on error in total counts
SNR = signal-to-noise ratio, computed using Nsrc/sqrt(Nbgd)
poisprob = Poisson probability of observing total counts given bgd. counts
sigmaj, sigmin = source extent (from detection output or spatial fitting) in units of arcsecs.
incang = position angle of source (inclination from x-axis)
cnts_soft = bgd.-subtracted counts in soft band (0.50 - 2.00 KeV, always taken directly from source aperture rather than model fitting)
cnts_hard = bgd.-subtracted counts in hard band (2.00 - 10.00 KeV, always taken directly from source aperture rather than model fitting)
hr, hr_err = hardness ratio ([cnts_hard-cnts_soft]/[cnts_hard+cnts_soft]) and error
ext = source extension flag: F = false (not extended), A = true (extended), A = asymetric (ratio of sigmaj/sigmin > 1 + x, where x = 0.5 by default)
var = variability flag: U = unknown, F = false (is not variable), T = true
N_H = Galactic column density as determined from LHEASOFT nh program
flux = flux determined from count rate using pimms (in the 0.30-8.00 keV bandpass for a power-law model with ph. index = 1.8)
vign = vignetting correction
Flags: d = detection parameters, s = simple spatial fitting parameters, b = simple spatial fitting failed, p = poor simple spatial fit, x = extracted events parameters, t = temporal anaylsis parameters, i = psf spatial fitting parameters, f = spectral fitting parameters, c = source is confused, u = user-defined source, v = detected source coincident with user-defined source, r = source is in region-of-interest