[Fri May  3 14:25:25 2013] Detection parameters:
  Position = (277.8, 286.2) = 0 6 19.37 20 12 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8698.7 +/- 110.3
  Background counts = 8.6
  Rate = 0.4 +/- 0.006

[Fri May  3 14:25:26 2013] Off-axis axis estimate = 1.74'
[Fri May  3 14:25:42 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri May  3 14:25:42 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Fri May  3 14:25:42 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Fri May  3 14:25:42 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Fri May  3 14:25:42 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_src1.ximg exists
[Fri May  3 14:25:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_src1.csv
[Fri May  3 14:25:42 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May  3 14:25:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_src1.csv
[Fri May  3 14:25:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 14:25:42 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May  3 14:25:42 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May  3 14:25:42 2013] Fit fullrun_mos2_xmm0510010701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May  3 14:25:53 2013] Spatial fit model total counts = 7901.270000, observed total counts = 7685.000000
[Fri May  3 14:25:53 2013] Offset between fit and detection position for source 2 = 0.173337 pixels
[Fri May  3 14:25:53 2013] 7902.110000 total counts/ 1892.600000 bgd. counts: snr = 138.136881
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.173337 pixels
  Position = (277.8, 286.4) = 0 6 19.38 20 12 9.2
  Extent = 5.3 (5.2-5.5)", rotation angle = 0
  Source counts = 6009.5 +/- 88.9
  Background counts = 1892.6
  Rate = 0.3 +/- 0.004
[Fri May  3 14:25:53 2013] Vigneting correction estimate = 1.000000
[Fri May  3 14:25:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 14:25:53 2013] Assessing source extent using major axis lower bound
[Fri May  3 14:25:53 2013] Source does appear to be extended
[Fri May  3 14:25:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 14:26:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 14:26:00 2013] Initial guess for spatial extent in simple fitting = 5.34"
[Fri May  3 14:26:00 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.006
[Fri May  3 14:26:00 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.34"
[Fri May  3 14:26:01 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src1.ximg exists
[Fri May  3 14:26:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src1.csv
[Fri May  3 14:26:01 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May  3 14:26:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src1.csv
[Fri May  3 14:26:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 14:26:01 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May  3 14:26:01 2013] fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May  3 14:26:01 2013] Fit fullrun_mos2_xmm0510010701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May  3 14:26:08 2013] Spatial fit model total counts = 7863.620000, observed total counts = 7664.000000
[Fri May  3 14:26:08 2013] Offset between fit and detection position for source 2 = 0.015941 pixels
[Fri May  3 14:26:08 2013] 7900.550000 total counts/ 1909.730000 bgd. counts: snr = 137.088267
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.015941 pixels
  Position = (277.8, 286.4) = 0 6 19.38 20 12 9.2
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 5990.8 +/- 88.9
  Background counts = 1909.7
  Rate = 0.3 +/- 0.004
[Fri May  3 14:26:08 2013] Vigneting correction estimate = 1.000000
[Fri May  3 14:26:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 14:26:08 2013] Assessing source extent using major axis lower bound
[Fri May  3 14:26:08 2013] Source does appear to be extended
[Fri May  3 14:26:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 14:36:15 2013] Counts = 5990.820000, rescaling region sizes by 2.000000
[Fri May  3 14:36:15 2013] XMMSAS src. selection expression = ellipse(24119.143400, 24867.287600, 637.280418, 637.280418, 0.000000, X, Y)
[Fri May  3 14:36:15 2013] Writing source region out to fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src2_src.reg
[Fri May  3 14:36:15 2013] Extracting stamp from image fullrun_mos2_xmm0510010701_pi300-10000_cl_sm2.00.img.gz, (241, 250) - (314, 323)
[Fri May  3 14:36:15 2013] XMMSAS bgd. selection expression = annulus(24119.143400, 24867.287600, 2124.268061, 4248.536122, X, Y) && !ellipse(21949.275420, 28977.570000, 393.368811, 393.368811, 0.000000, X, Y)
[Fri May  3 14:36:15 2013] Writing fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src2.gif
[Fri May  3 14:36:17 2013] Mean detx,y = (85.58, 132.91) 
[Fri May  3 14:36:18 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 14:36:32 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 14:36:32 2013] Setting source spectrum file to fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May  3 14:36:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May  3 14:43:49 2013] Updating aperture counts using extracted products
[Fri May  3 14:43:49 2013] Total counts from fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 7461.00
[Fri May  3 14:43:50 2013] Total counts from fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1912.00
[Fri May  3 14:43:50 2013] Got source and background scale factors 1255128.000000, 41525140.000000
[Fri May  3 14:43:50 2013] User source parameters:
  Position = (277.8, 286.4) = 0 6 19.38 20 12 9.2
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source aperture counts = 7403.2 +/- 87.4
  Background aperture counts = 57.8
  Rate = 0.4 +/- 0.004

[Fri May  3 14:43:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 14:43:51 2013] Using photon index=1.80, rate=0.294, arf fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src2.arf
[Fri May  3 14:43:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 14:43:51 2013] Updating source flux to 3.4e-12
[Fri May  3 14:43:55 2013] xmm0510010701/analysis//spectral/fullrun_mos2_xmm0510010701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete